#include "cppdefs.h" #ifdef FOUR_DVAR SUBROUTINE wrt_ini (ng, Tindex) ! !svn $Id: wrt_ini.F 889 2018-02-10 03:32:52Z arango $ !================================================== Hernan G. Arango === ! Copyright (c) 2002-2019 The ROMS/TOMS Group ! ! Licensed under a MIT/X style license ! ! See License_ROMS.txt ! !======================================================================= ! ! ! This routine writes state variables initial conditions into initial ! ! NetCDF file. ! ! ! ! On Input: ! ! ! ! ng Nested grid number. ! ! Tindex State variables time index to write. ! ! ! ! Notice that only momentum is affected by the full time-averaged ! ! masks. If applicable, these mask contains information about ! ! river runoff and time-dependent wetting and drying variations. ! ! ! !======================================================================= ! USE mod_param USE mod_parallel USE mod_fourdvar USE mod_grid USE mod_iounits USE mod_mixing USE mod_ncparam USE mod_netcdf USE mod_ocean USE mod_scalars # if defined SEDIMENT || defined BBL_MODEL USE mod_sediment # endif USE mod_stepping ! USE nf_fwrite2d_mod, ONLY : nf_fwrite2d # ifdef SOLVE3D USE nf_fwrite3d_mod, ONLY : nf_fwrite3d # endif USE strings_mod, ONLY : FoundError ! implicit none ! ! Imported variable declarations. ! integer, intent(in) :: ng, Tindex ! ! Local variable declarations. ! integer :: LBi, UBi, LBj, UBj integer :: Fcount, gfactor, gtype, i, itrc, status, varid real(r8) :: my_time, scale logical :: SetFillVal ! LBi=LBOUND(GRID(ng)%h,DIM=1) UBi=UBOUND(GRID(ng)%h,DIM=1) LBj=LBOUND(GRID(ng)%h,DIM=2) UBj=UBOUND(GRID(ng)%h,DIM=2) ! SourceFile=__FILE__ ! !----------------------------------------------------------------------- ! Set SetFillVal to FALSE. This is essential to ensure identical ! outer-loop solutions when increments are zero. NOT SURE WHY THIS ! IS NECESSARY - PERHAPS SOMETHING WRONG WITH THE LOGIC OF ! nf_fwrite routines. !----------------------------------------------------------------------- ! SetFillVal=.FALSE. ! !----------------------------------------------------------------------- ! Write out initial conditions. !----------------------------------------------------------------------- ! IF (FoundError(exit_flag, NoError, __LINE__, & & __FILE__)) RETURN ! ! Set grid type factor to write full (gfactor=1) fields or water ! points (gfactor=-1) fields only. ! # if defined WRITE_WATER && defined MASKING gfactor=-1 # else gfactor=1 # endif ! ! Set time record index. ! INI(ng)%Rindex=INI(ng)%Rindex+1 Fcount=INI(ng)%Fcount INI(ng)%Nrec(Fcount)=INI(ng)%Nrec(Fcount)+1 ! ! Write out model time (s). Use the "tdays" variable here because of ! the management of the "time" variable due to nesting. ! my_time=tdays(ng)*day2sec CALL netcdf_put_fvar (ng, iNLM, INI(ng)%name, & & TRIM(Vname(1,idtime)), my_time, & & (/INI(ng)%Rindex/), (/1/), & & ncid = INI(ng)%ncid, & & varid = INI(ng)%Vid(idtime)) IF (FoundError(exit_flag, NoError, __LINE__, & & __FILE__)) RETURN ! ! Write out free-surface (m) ! scale=1.0_r8 gtype=gfactor*r2dvar status=nf_fwrite2d(ng, iNLM, INI(ng)%ncid, INI(ng)%Vid(idFsur), & & INI(ng)%Rindex, gtype, & & LBi, UBi, LBj, UBj, scale, & # ifdef MASKING & GRID(ng) % rmask, & # endif # ifdef WET_DRY & OCEAN(ng) % zeta(:,:,Tindex), & & SetFillVal = .FALSE.) # else & OCEAN(ng) % zeta(:,:,Tindex), & & SetFillVal) # endif IF (FoundError(status, nf90_noerr, __LINE__, & & __FILE__)) THEN IF (Master) THEN WRITE (stdout,10) TRIM(Vname(1,idFsur)), INI(ng)%Rindex END IF exit_flag=3 ioerror=status RETURN END IF ! ! Write out 2D momentum component (m/s) in the XI-direction. ! scale=1.0_r8 gtype=gfactor*u2dvar status=nf_fwrite2d(ng, iNLM, INI(ng)%ncid, INI(ng)%Vid(idUbar), & & INI(ng)%Rindex, gtype, & & LBi, UBi, LBj, UBj, scale, & # ifdef MASKING & GRID(ng) % umask_full, & # endif & OCEAN(ng) % ubar(:,:,Tindex), & & SetFillVal) IF (FoundError(status, nf90_noerr, __LINE__, & & __FILE__)) THEN IF (Master) THEN WRITE (stdout,10) TRIM(Vname(1,idUbar)), INI(ng)%Rindex END IF exit_flag=3 ioerror=status RETURN END IF ! ! Write out 2D momentum component (m/s) in the ETA-direction. ! scale=1.0_r8 gtype=gfactor*v2dvar status=nf_fwrite2d(ng, iNLM, INI(ng)%ncid, INI(ng)%Vid(idVbar), & & INI(ng)%Rindex, gtype, & & LBi, UBi, LBj, UBj, scale, & # ifdef MASKING & GRID(ng) % vmask_full, & # endif & OCEAN(ng) % vbar(:,:,Tindex), & & SetFillVal) IF (FoundError(status, nf90_noerr, __LINE__, & & __FILE__)) THEN IF (Master) THEN WRITE (stdout,10) TRIM(Vname(1,idVbar)), INI(ng)%Rindex END IF exit_flag=3 ioerror=status RETURN END IF # ifdef SOLVE3D ! ! Write out 3D momentum component (m/s) in the XI-direction. ! scale=1.0_r8 gtype=gfactor*u3dvar status=nf_fwrite3d(ng, iNLM, INI(ng)%ncid, INI(ng)%Vid(idUvel), & & INI(ng)%Rindex, gtype, & & LBi, UBi, LBj, UBj, 1, N(ng), scale, & # ifdef MASKING & GRID(ng) % umask_full, & # endif & OCEAN(ng) % u(:,:,:,Tindex), & & SetFillVal) IF (FoundError(status, nf90_noerr, __LINE__, & & __FILE__)) THEN IF (Master) THEN WRITE (stdout,10) TRIM(Vname(1,idUvel)), INI(ng)%Rindex END IF exit_flag=3 ioerror=status RETURN END IF ! ! Write out 3D momentum component (m/s) in the ETA-direction. ! scale=1.0_r8 gtype=gfactor*v3dvar status=nf_fwrite3d(ng, iNLM, INI(ng)%ncid, INI(ng)%Vid(idVvel), & & INI(ng)%Rindex, gtype, & & LBi, UBi, LBj, UBj, 1, N(ng), scale, & # ifdef MASKING & GRID(ng) % vmask_full, & # endif & OCEAN(ng) % v(:,:,:,Tindex), & & SetFillVal) IF (FoundError(status, nf90_noerr, __LINE__, & & __FILE__)) THEN IF (Master) THEN WRITE (stdout,10) TRIM(Vname(1,idVvel)), INI(ng)%Rindex END IF exit_flag=3 ioerror=status RETURN END IF ! ! Write out tracer type variables. ! DO itrc=1,NT(ng) scale=1.0_r8 gtype=gfactor*r3dvar status=nf_fwrite3d(ng, iNLM, INI(ng)%ncid, INI(ng)%Tid(itrc), & & INI(ng)%Rindex, gtype, & & LBi, UBi, LBj, UBj, 1, N(ng), scale, & # ifdef MASKING & GRID(ng) % rmask, & # endif & OCEAN(ng) % t(:,:,:,Tindex,itrc), & & SetFillVal) IF (FoundError(status, nf90_noerr, __LINE__, & & __FILE__)) THEN IF (Master) THEN WRITE (stdout,10) TRIM(Vname(1,idTvar(itrc))), INI(ng)%Rindex END IF exit_flag=3 ioerror=status RETURN END IF END DO # if defined BVF_MIXING || defined GLS_MIXING || \ defined MY25_MIXING || defined LMD_MIXING ! ! If defined, write out vertical viscosity coefficient. ! IF (INI(ng)%Vid(idVvis).gt.0) THEN scale=1.0_r8 gtype=gfactor*w3dvar status=nf_fwrite3d(ng, iNLM, INI(ng)%ncid, INI(ng)%Vid(idVvis), & & INI(ng)%Rindex, gtype, & & LBi, UBi, LBj, UBj, 0, N(ng), scale, & # ifdef MASKING & GRID(ng) % rmask, & # endif & MIXING(ng) % Akv, & & SetFillVal = .FALSE.) IF (FoundError(status, nf90_noerr, __LINE__, & & __FILE__)) THEN IF (Master) THEN WRITE (stdout,10) TRIM(Vname(1,idVvis)), INI(ng)%Rindex END IF exit_flag=3 ioerror=status RETURN END IF END IF ! ! If defined, write out vertical diffusion coefficient for potential ! temperature. ! IF (INI(ng)%Vid(idTdif).gt.0) THEN scale=1.0_r8 gtype=gfactor*w3dvar status=nf_fwrite3d(ng, iNLM, INI(ng)%ncid, INI(ng)%Vid(idTdif), & & INI(ng)%Rindex, gtype, & & LBi, UBi, LBj, UBj, 0, N(ng), scale, & # ifdef MASKING & GRID(ng) % rmask, & # endif & MIXING(ng) % Akt(:,:,:,itemp), & & SetFillVal = .FALSE.) IF (FoundError(status, nf90_noerr, __LINE__, & & __FILE__)) THEN IF (Master) THEN WRITE (stdout,10) TRIM(Vname(1,idTdif)), INI(ng)%Rindex END IF exit_flag=3 ioerror=status RETURN END IF END IF # ifdef SALINITY ! ! If defined, write out vertical diffusion coefficient for salinity. ! IF (INI(ng)%Vid(idSdif).gt.0) THEN scale=1.0_r8 gtype=gfactor*w3dvar status=nf_fwrite3d(ng, iNLM, INI(ng)%ncid, INI(ng)%Vid(idSdif), & & INI(ng)%Rindex, gtype, & & LBi, UBi, LBj, UBj, 0, N(ng), scale, & # ifdef MASKING & GRID(ng) % rmask, & # endif & MIXING(ng) % Akt(:,:,:,isalt), & & SetFillVal = .FALSE.) IF (FoundError(status, nf90_noerr, __LINE__, & & __FILE__)) THEN IF (Master) THEN WRITE (stdout,10) TRIM(Vname(1,idSdif)), INI(ng)%Rindex END IF exit_flag=3 ioerror=status RETURN END IF END IF # endif # endif # endif ! !----------------------------------------------------------------------- ! Synchronize initial NetCDF file to disk to allow other processes ! to access data immediately after it is written. !----------------------------------------------------------------------- ! CALL netcdf_sync (ng, iNLM, INI(ng)%name, INI(ng)%ncid) IF (FoundError(exit_flag, NoError, __LINE__, & & __FILE__)) RETURN IF (Master) THEN # ifdef SOLVE3D # ifdef NESTING WRITE (stdout,20) Nrun, Tindex, Tindex, INI(ng)%Rindex, ng # else WRITE (stdout,20) Nrun, Tindex, Tindex, INI(ng)%Rindex # endif # else # ifdef NESTING WRITE (stdout,20) Nrun, Tindex, INI(ng)%Rindex, ng # else WRITE (stdout,20) Nrun, Tindex, INI(ng)%Rindex # endif # endif END IF ! 10 FORMAT (/,' WRT_INI - error while writing variable: ',a,/,11x, & & 'into initial NetCDF file for time record: ',i4) # ifdef SOLVE3D 20 FORMAT (6x,'WRT_INI - wrote initial fields (Iter=',i4.4, & # ifdef NESTING & ', Index=',i1,',',i1,', Rec=',i4.4,', Grid 'i2.2,')') # else & ', Index=',i1,',',i1,', Rec=',i4.4,')') # endif # else 20 FORMAT (6x,'WRT_INI - wrote initial fields (Iter=',i4.4, & # ifdef NESTING & ', Index=',i1,', Rec=',i4.4,', Grid ',i2.2,')') # else & ', Index=',i1,', Rec=',i4.4,')') # endif # endif RETURN END SUBROUTINE wrt_ini # if defined ADJUST_BOUNDARY || \ defined ADJUST_WSTRESS || defined ADJUST_STFLUX SUBROUTINE wrt_frc (ng, Tindex, OutRec) ! !======================================================================= ! ! ! This routine writes surface forcing and/or open boundary background ! ! state into nonlinear model initial conditions NetCDF file. ! ! ! ! On Input: ! ! ! ! ng Nested grid number. ! ! Tindex State variables time index to write. ! ! OutRec NetCDF file unlimited dimension record to write. ! ! ! !======================================================================= ! USE mod_param USE mod_parallel # if defined ADJUST_BOUNDARY USE mod_boundary # endif # if defined ADJUST_WSTRESS || defined ADJUST_STFLUX USE mod_forces USE mod_grid # endif USE mod_iounits USE mod_ncparam USE mod_netcdf USE mod_scalars USE mod_stepping ! # ifdef ADJUST_BOUNDARY USE nf_fwrite2d_bry_mod, ONLY : nf_fwrite2d_bry # ifdef SOLVE3D USE nf_fwrite3d_bry_mod, ONLY : nf_fwrite3d_bry # endif # endif USE nf_fwrite3d_mod, ONLY : nf_fwrite3d USE strings_mod, ONLY : FoundError ! implicit none ! ! Imported variable declarations. ! integer, intent(in) :: ng, Tindex, OutRec ! ! Local variable declarations. ! # if defined ADJUST_WSTRESS || defined ADJUST_STFLUX integer :: LBi, UBi, LBj, UBj # endif # ifdef ADJUST_BOUNDARY integer :: LBij, UBij # endif integer :: gfactor, gtype, i, itrc, status real(r8) :: scale ! # if defined ADJUST_WSTRESS || defined ADJUST_STFLUX LBi=LBOUND(GRID(ng)%h,DIM=1) UBi=UBOUND(GRID(ng)%h,DIM=1) LBj=LBOUND(GRID(ng)%h,DIM=2) UBj=UBOUND(GRID(ng)%h,DIM=2) # endif # ifdef ADJUST_BOUNDARY LBij=BOUNDS(ng)%LBij UBij=BOUNDS(ng)%UBij # endif ! SourceFile=__FILE__ // ", wrt_frc" ! !----------------------------------------------------------------------- ! Write out initial conditions. !----------------------------------------------------------------------- ! IF (FoundError(exit_flag, NoError, __LINE__, & & __FILE__)) RETURN ! ! Set grid type factor to write full (gfactor=1) fields or water ! points (gfactor=-1) fields only. ! # if defined WRITE_WATER && defined MASKING gfactor=-1 # else gfactor=1 # endif # ifdef ADJUST_BOUNDARY ! ! Write out open boundary fields. Notice that these fields have their ! own fixed time-dimension (of size Nbrec) to allow 4DVAR adjustments ! at other times in addition to initialization time. ! ! Write out free-surface open boundaries. ! IF (ANY(Lobc(:,isFsur,ng))) THEN scale=1.0_r8 status=nf_fwrite2d_bry (ng, iNLM, INI(ng)%name, INI(ng)%ncid, & & Vname(1,idSbry(isFsur)), & & INI(ng)%Vid(idSbry(isFsur)), & & OutRec, r2dvar, & & LBij, UBij, Nbrec(ng), scale, & & BOUNDARY(ng) % zeta_obc(LBij:,:,:, & & Tindex)) IF (FoundError(status, nf90_noerr, __LINE__, & & __FILE__)) THEN IF (Master) THEN WRITE (stdout,10) TRIM(Vname(1,idSbry(isFsur))), OutRec END IF exit_flag=3 ioerror=status RETURN END IF END IF ! ! Write out 2D U-momentum component open boundaries. ! IF (ANY(Lobc(:,isUbar,ng))) THEN scale=1.0_r8 status=nf_fwrite2d_bry (ng, iNLM, INI(ng)%name, INI(ng)%ncid, & & Vname(1,idSbry(isUbar)), & & INI(ng)%Vid(idSbry(isUbar)), & & OutRec, u2dvar, & & LBij, UBij, Nbrec(ng), scale, & & BOUNDARY(ng) % ubar_obc(LBij:,:,:, & & Tindex)) IF (FoundError(status, nf90_noerr, __LINE__, & & __FILE__)) THEN IF (Master) THEN WRITE (stdout,10) TRIM(Vname(1,idSbry(isUbar))), OutRec END IF exit_flag=3 ioerror=status RETURN END IF END IF ! ! Write out 2D V-momentum component open boundaries. ! IF (ANY(Lobc(:,isVbar,ng))) THEN scale=1.0_r8 status=nf_fwrite2d_bry (ng, iNLM, INI(ng)%name, INI(ng)%ncid, & & Vname(1,idSbry(isVbar)), & & INI(ng)%Vid(idSbry(isVbar)), & & OutRec, v2dvar, & & LBij, UBij, Nbrec(ng), scale, & & BOUNDARY(ng) % vbar_obc(LBij:,:,:, & & Tindex)) IF (FoundError(status, nf90_noerr, __LINE__, & & __FILE__)) THEN IF (Master) THEN WRITE (stdout,10) TRIM(Vname(1,idSbry(isVbar))), OutRec END IF exit_flag=3 ioerror=status RETURN END IF END IF # ifdef SOLVE3D ! ! Write out 3D U-momentum component open boundaries. ! IF (ANY(Lobc(:,isUvel,ng))) THEN scale=1.0_r8 status=nf_fwrite3d_bry (ng, iNLM, INI(ng)%name, INI(ng)%ncid, & & Vname(1,idSbry(isUvel)), & & INI(ng)%Vid(idSbry(isUvel)), & & OutRec, u3dvar, & & LBij, UBij, 1, N(ng), Nbrec(ng), scale, & & BOUNDARY(ng) % u_obc(LBij:,:,:,:, & & Tindex)) IF (FoundError(status, nf90_noerr, __LINE__, & & __FILE__)) THEN IF (Master) THEN WRITE (stdout,10) TRIM(Vname(1,idSbry(isUvel))), OutRec END IF exit_flag=3 ioerror=status RETURN END IF END IF ! ! Write out 3D V-momentum component open boundaries. ! IF (ANY(Lobc(:,isVvel,ng))) THEN scale=1.0_r8 status=nf_fwrite3d_bry (ng, iNLM, INI(ng)%name, INI(ng)%ncid, & & Vname(1,idSbry(isVvel)), & & INI(ng)%Vid(idSbry(isVvel)), & & OutRec, v3dvar, & & LBij, UBij, 1, N(ng), Nbrec(ng), scale, & & BOUNDARY(ng) % v_obc(LBij:,:,:,:, & & Tindex)) IF (FoundError(status, nf90_noerr, __LINE__, & & __FILE__)) THEN IF (Master) THEN WRITE (stdout,10) TRIM(Vname(1,idSbry(isVvel))), OutRec END IF exit_flag=3 ioerror=status RETURN END IF END IF ! ! Write out 3D tracers open boundaries. ! DO itrc=1,NT(ng) IF (ANY(Lobc(:,isTvar(itrc),ng))) THEN scale=1.0_r8 status=nf_fwrite3d_bry (ng, iNLM, INI(ng)%name, INI(ng)%ncid, & & Vname(1,idSbry(isTvar(itrc))), & & INI(ng)%Vid(idSbry(isTvar(itrc))), & & OutRec, r3dvar, & & LBij, UBij, 1, N(ng), Nbrec(ng), & & scale, & & BOUNDARY(ng) % t_obc(LBij:,:,:,:, & & Tindex,itrc)) IF (FoundError(status, nf90_noerr, __LINE__, & & __FILE__)) THEN IF (Master) THEN WRITE (stdout,10) TRIM(Vname(1,idSbry(isTvar(itrc)))), & & OutRec END IF exit_flag=3 ioerror=status RETURN END IF END IF END DO # endif # endif # ifdef ADJUST_WSTRESS ! ! Write out surface U-momentum stress. Notice that the stress has its ! own fixed time-dimension (of size Nfrec) to allow 4DVAR adjustments ! at other times in addition to initialization time. ! scale=rho0 ! m2/s2 to N/m2 (Pa) gtype=gfactor*u3dvar status=nf_fwrite3d(ng, iNLM, INI(ng)%ncid, INI(ng)%Vid(idUsms), & & OutRec, gtype, & & LBi, UBi, LBj, UBj, 1, Nfrec(ng), scale, & # ifdef MASKING & GRID(ng) % umask, & # endif & FORCES(ng) % ustr(:,:,:,Tindex)) IF (FoundError(status, nf90_noerr, __LINE__, & & __FILE__)) THEN IF (Master) THEN WRITE (stdout,10) TRIM(Vname(1,idUsms)), OutRec END IF exit_flag=3 ioerror=status RETURN END IF ! ! Write out surface V-momentum stress. ! scale=rho0 ! m2/s2 to N/m2 (Pa) gtype=gfactor*v3dvar status=nf_fwrite3d(ng, iNLM, INI(ng)%ncid, INI(ng)%Vid(idVsms), & & OutRec, gtype, & & LBi, UBi, LBj, UBj, 1, Nfrec(ng), scale, & # ifdef MASKING & GRID(ng) % vmask, & # endif & FORCES(ng) % vstr(:,:,:,Tindex)) IF (FoundError(status, nf90_noerr, __LINE__, & & __FILE__)) THEN IF (Master) THEN WRITE (stdout,10) TRIM(Vname(1,idVsms)), OutRec END IF exit_flag=3 ioerror=status RETURN END IF # endif # if defined ADJUST_STFLUX && defined SOLVE3D ! ! Write out surface net tracers fluxes. Notice that fluxes have their ! own fixed time-dimension (of size Nfrec) to allow 4DVAR adjustments ! at other times in addition to initialization time. ! DO itrc=1,NT(ng) IF (Lstflux(itrc,ng)) THEN IF (itrc.eq.itemp) THEN scale=rho0*Cp ! Celsius m/s to W/m2 ELSE scale=1.0_r8 END IF gtype=gfactor*r3dvar status=nf_fwrite3d(ng, iNLM, INI(ng)%ncid, & & INI(ng)%Vid(idTsur(itrc)), & & OutRec, gtype, & & LBi, UBi, LBj, UBj, 1, Nfrec(ng), scale, & # ifdef MASKING & GRID(ng) % rmask, & # endif & FORCES(ng) % tflux(:,:,:,Tindex,itrc)) IF (FoundError(status, nf90_noerr, __LINE__, & & __FILE__)) THEN IF (Master) THEN WRITE (stdout,10) TRIM(Vname(1,idTsur(itrc))), & & OutRec END IF exit_flag=3 ioerror=status RETURN END IF END IF END DO # endif ! !----------------------------------------------------------------------- ! Synchronize initial NetCDF file to disk to allow other processes ! to access data immediately after it is written. !----------------------------------------------------------------------- ! CALL netcdf_sync (ng, iNLM, INI(ng)%name, INI(ng)%ncid) IF (FoundError(exit_flag, NoError, __LINE__, & & __FILE__)) RETURN IF (Master) THEN # ifdef NESTING WRITE (stdout,20) Nrun, Tindex, OutRec, ng # else WRITE (stdout,20) Nrun, Tindex, OutRec # endif END IF ! 10 FORMAT (/,' WRT_FRC - error while writing variable: ',a,/,11x, & & 'into initial NetCDF file for time record: ',i4) 20 FORMAT (6x,'WRT_FRC - wrote initial fields (Iter=',i4.4, & # ifdef NESTING & ', Index=',i1,', Rec=',i4.4,', Grid ',i2.2,')') # else & ', Index=',i1,', Rec=',i4.4,')') # endif RETURN END SUBROUTINE wrt_frc SUBROUTINE wrt_frc_AD (ng, Tindex, OutRec) ! !======================================================================= ! ! ! This routine writes surface forcing and/or open boundary fields ! ! into initial conditions NetCDF file. ! ! ! ! On Input: ! ! ! ! ng Nested grid number. ! ! Tindex State variables time index to write. ! ! OutRec NetCDF file unlimited dimension record to write. ! ! ! !======================================================================= ! USE mod_param USE mod_parallel # if defined ADJUST_BOUNDARY USE mod_boundary # endif # if defined ADJUST_WSTRESS || defined ADJUST_STFLUX USE mod_forces USE mod_grid # endif USE mod_iounits USE mod_ncparam USE mod_netcdf USE mod_scalars USE mod_stepping ! # ifdef ADJUST_BOUNDARY USE nf_fwrite2d_bry_mod, ONLY : nf_fwrite2d_bry # ifdef SOLVE3D USE nf_fwrite3d_bry_mod, ONLY : nf_fwrite3d_bry # endif # endif USE nf_fwrite3d_mod, ONLY : nf_fwrite3d USE strings_mod, ONLY : FoundError ! implicit none ! ! Imported variable declarations. ! integer, intent(in) :: ng, Tindex, OutRec ! ! Local variable declarations. ! # if defined ADJUST_WSTRESS || defined ADJUST_STFLUX integer :: LBi, UBi, LBj, UBj # endif # ifdef ADJUST_BOUNDARY integer :: IorJ, LBij, UBij # endif integer :: gfactor, gtype, i, itrc, status real(r8) :: scale ! # if defined ADJUST_WSTRESS || defined ADJUST_STFLUX LBi=LBOUND(GRID(ng)%h,DIM=1) UBi=UBOUND(GRID(ng)%h,DIM=1) LBj=LBOUND(GRID(ng)%h,DIM=2) UBj=UBOUND(GRID(ng)%h,DIM=2) # endif # ifdef ADJUST_BOUNDARY LBij=BOUNDS(ng)%LBij UBij=BOUNDS(ng)%UBij IorJ=IOBOUNDS(ng)%IorJ # endif ! SourceFile=__FILE__ // ", wrt_frc_AD" ! !----------------------------------------------------------------------- ! Write out initial conditions. !----------------------------------------------------------------------- ! IF (FoundError(exit_flag, NoError, __LINE__, & & __FILE__)) RETURN ! ! Set grid type factor to write full (gfactor=1) fields or water ! points (gfactor=-1) fields only. ! # if defined WRITE_WATER && defined MASKING gfactor=-1 # else gfactor=1 # endif # ifdef ADJUST_BOUNDARY ! ! Write out open boundary fields. Notice that these fields have their ! own fixed time-dimension (of size Nbrec) to allow 4DVAR adjustments ! at other times in addition to initialization time. ! ! Write out free-surface open boundaries. ! IF (ANY(Lobc(:,isFsur,ng))) THEN scale=1.0_r8 status=nf_fwrite2d_bry (ng, iNLM, INI(ng)%name, INI(ng)%ncid, & & Vname(1,idSbry(isFsur)), & & INI(ng)%Vid(idSbry(isFsur)), & & OutRec, r2dvar, & & LBij, UBij, Nbrec(ng), scale, & & BOUNDARY(ng) % ad_zeta_obc(LBij:,:,:, & & Tindex)) IF (FoundError(status, nf90_noerr, __LINE__, & & __FILE__)) THEN IF (Master) THEN WRITE (stdout,10) TRIM(Vname(1,idSbry(isFsur))), OutRec END IF exit_flag=3 ioerror=status RETURN END IF END IF ! ! Write out 2D U-momentum component open boundaries. ! IF (ANY(Lobc(:,isUbar,ng))) THEN scale=1.0_r8 status=nf_fwrite2d_bry (ng, iNLM, INI(ng)%name, INI(ng)%ncid, & & Vname(1,idSbry(isUbar)), & & INI(ng)%Vid(idSbry(isUbar)), & & OutRec, u2dvar, & & LBij, UBij, Nbrec(ng), scale, & & BOUNDARY(ng) % ad_ubar_obc(LBij:,:,:, & & Tindex)) IF (FoundError(status, nf90_noerr, __LINE__, & & __FILE__)) THEN IF (Master) THEN WRITE (stdout,10) TRIM(Vname(1,idSbry(isUbar))), OutRec END IF exit_flag=3 ioerror=status RETURN END IF END IF ! ! Write out 2D V-momentum component open boundaries. ! IF (ANY(Lobc(:,isVbar,ng))) THEN scale=1.0_r8 status=nf_fwrite2d_bry (ng, iNLM, INI(ng)%name, INI(ng)%ncid, & & Vname(1,idSbry(isVbar)), & & INI(ng)%Vid(idSbry(isVbar)), & & OutRec, v2dvar, & & LBij, UBij, Nbrec(ng), scale, & & BOUNDARY(ng) % ad_vbar_obc(LBij:,:,:, & & Tindex)) IF (FoundError(status, nf90_noerr, __LINE__, & & __FILE__)) THEN IF (Master) THEN WRITE (stdout,10) TRIM(Vname(1,idSbry(isVbar))), OutRec END IF exit_flag=3 ioerror=status RETURN END IF END IF # ifdef SOLVE3D ! ! Write out 3D U-momentum component open boundaries. ! IF (ANY(Lobc(:,isUvel,ng))) THEN scale=1.0_r8 status=nf_fwrite3d_bry (ng, iNLM, INI(ng)%name, INI(ng)%ncid, & & Vname(1,idSbry(isUvel)), & & INI(ng)%Vid(idSbry(isUvel)), & & OutRec, u3dvar, & & LBij, UBij, 1, N(ng), Nbrec(ng), scale, & & BOUNDARY(ng) % ad_u_obc(LBij:,:,:,:, & & Tindex)) IF (FoundError(status, nf90_noerr, __LINE__, & & __FILE__)) THEN IF (Master) THEN WRITE (stdout,10) TRIM(Vname(1,idSbry(isUvel))), OutRec END IF exit_flag=3 ioerror=status RETURN END IF END IF ! ! Write out 3D V-momentum component open boundaries. ! IF (ANY(Lobc(:,isVvel,ng))) THEN scale=1.0_r8 status=nf_fwrite3d_bry (ng, iNLM, INI(ng)%name, INI(ng)%ncid, & & Vname(1,idSbry(isVvel)), & & INI(ng)%Vid(idSbry(isVvel)), & & OutRec, v3dvar, & & LBij, UBij, 1, N(ng), Nbrec(ng), scale, & & BOUNDARY(ng) % ad_v_obc(LBij:,:,:,:, & & Tindex)) IF (FoundError(status, nf90_noerr, __LINE__, & & __FILE__)) THEN IF (Master) THEN WRITE (stdout,10) TRIM(Vname(1,idSbry(isVvel))), OutRec END IF exit_flag=3 ioerror=status RETURN END IF END IF ! ! Write out 3D tracers open boundaries. ! DO itrc=1,NT(ng) IF (ANY(Lobc(:,isTvar(itrc),ng))) THEN scale=1.0_r8 status=nf_fwrite3d_bry (ng, iNLM, INI(ng)%name, INI(ng)%ncid, & & Vname(1,idSbry(isTvar(itrc))), & & INI(ng)%Vid(idSbry(isTvar(itrc))), & & OutRec, r3dvar, & & LBij, UBij, 1, N(ng), Nbrec(ng), & & scale, & & BOUNDARY(ng) % ad_t_obc(LBij:,:,:,:, & & Tindex,itrc)) IF (FoundError(status, nf90_noerr, __LINE__, & & __FILE__)) THEN IF (Master) THEN WRITE (stdout,10) TRIM(Vname(1,idSbry(isTvar(itrc)))), & & INI(ng)%Rindex END IF exit_flag=3 ioerror=status RETURN END IF END IF END DO # endif # endif # ifdef ADJUST_WSTRESS ! ! Write out surface U-momentum stress. Notice that the stress has its ! own fixed time-dimension (of size Nfrec) to allow 4DVAR adjustments ! at other times in addition to initialization time. ! scale=1.0_r8 gtype=gfactor*u3dvar status=nf_fwrite3d(ng, iNLM, INI(ng)%ncid, INI(ng)%Vid(idUsms), & & OutRec, gtype, & & LBi, UBi, LBj, UBj, 1, Nfrec(ng), scale, & # ifdef MASKING & GRID(ng) % umask, & # endif & FORCES(ng) % ad_ustr(:,:,:,Tindex)) IF (FoundError(status, nf90_noerr, __LINE__, & & __FILE__)) THEN IF (Master) THEN WRITE (stdout,10) TRIM(Vname(1,idUsms)), OutRec END IF exit_flag=3 ioerror=status RETURN END IF ! ! Write out surface V-momentum stress. ! scale=1.0_r8 gtype=gfactor*v3dvar status=nf_fwrite3d(ng, iNLM, INI(ng)%ncid, INI(ng)%Vid(idVsms), & & OutRec, gtype, & & LBi, UBi, LBj, UBj, 1, Nfrec(ng), scale, & # ifdef MASKING & GRID(ng) % vmask, & # endif & FORCES(ng) % ad_vstr(:,:,:,Tindex)) IF (FoundError(status, nf90_noerr, __LINE__, & & __FILE__)) THEN IF (Master) THEN WRITE (stdout,10) TRIM(Vname(1,idVsms)), OutRec END IF exit_flag=3 ioerror=status RETURN END IF # endif # if defined ADJUST_STFLUX && defined SOLVE3D ! ! Write out surface net tracers fluxes. Notice that fluxes have their ! own fixed time-dimension (of size Nfrec) to allow 4DVAR adjustments ! at other times in addition to initialization time. ! DO itrc=1,NT(ng) IF (Lstflux(itrc,ng)) THEN scale=1.0_r8 gtype=gfactor*r3dvar status=nf_fwrite3d(ng, iNLM, INI(ng)%ncid, & & INI(ng)%Vid(idTsur(itrc)), & & OutRec, gtype, & & LBi, UBi, LBj, UBj, 1, Nfrec(ng), scale, & # ifdef MASKING & GRID(ng) % rmask, & # endif & FORCES(ng) % ad_tflux(:,:,:,Tindex,itrc)) IF (FoundError(status, nf90_noerr, __LINE__, & & __FILE__)) THEN IF (Master) THEN WRITE (stdout,10) TRIM(Vname(1,idTsur(itrc))), & & OutRec END IF exit_flag=3 ioerror=status RETURN END IF END IF END DO # endif ! !----------------------------------------------------------------------- ! Synchronize initial NetCDF file to disk to allow other processes ! to access data immediately after it is written. !----------------------------------------------------------------------- ! CALL netcdf_sync (ng, iNLM, INI(ng)%name, INI(ng)%ncid) IF (FoundError(exit_flag, NoError, __LINE__, & & __FILE__)) RETURN IF (Master) THEN # ifdef NESTING WRITE (stdout,20) Nrun, Tindex, OutRec, ng # else WRITE (stdout,20) Nrun, Tindex, OutRec # endif END IF ! 10 FORMAT (/,' WRT_FRC_AD - error while writing variable: ',a,/,11x, & & 'into initial NetCDF file for time record: ',i4) 20 FORMAT (6x,'WRT_FRC_AD - wrote initial fields (Iter=',i4.4, & # ifdef NESTING & ', Index=',i1,', Rec=',i4.4,', Grid ',i2.2,')') # else & ', Index=',i1,', Rec=',i4.4,')') # endif RETURN END SUBROUTINE wrt_frc_AD # endif #else SUBROUTINE wrt_ini RETURN END SUBROUTINE wrt_ini #endif