#include "swancpp.h"
! Last change: NB 04 Jan 2001 12:00 pm
!
! OCEAN PACK - Installation dependent subroutines
!
!*****************************************************************
! *
#ifdef SWAN_MODEL
SUBROUTINE OCPINI (ng, LREAD, INERR)
#else
SUBROUTINE OCPINI (INIFIL, LREAD, INERR)
#endif
! *
!*****************************************************************
!
USE OCPCOMM1 40.41
USE OCPCOMM2 40.41
USE OCPCOMM3 40.41
USE OCPCOMM4 40.41
USE M_PARALL 40.31
!PUN USE SIZES 40.95
!
!
! --|-----------------------------------------------------------|--
! | Delft University of Technology |
! | Faculty of Civil Engineering |
! | Environmental Fluid Mechanics Section |
! | P.O. Box 5048, 2600 GA Delft, The Netherlands |
! | |
! | Programmers: The SWAN team |
! --|-----------------------------------------------------------|--
!
!
! SWAN (Simulating WAves Nearshore); a third generation wave model
! Copyright (C) 1993-2017 Delft University of Technology
!
! This program is free software; you can redistribute it and/or
! modify it under the terms of the GNU General Public License as
! published by the Free Software Foundation; either version 2 of
! the License, or (at your option) any later version.
!
! This program is distributed in the hope that it will be useful,
! but WITHOUT ANY WARRANTY; without even the implied warranty of
! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
! GNU General Public License for more details.
!
! A copy of the GNU General Public License is available at
! http://www.gnu.org/copyleft/gpl.html#SEC3
! or by writing to the Free Software Foundation, Inc.,
! 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
!
!
! 0. Authors
!
! 30.74: IJsbrand Haagsma (Include version)
! 30.82: IJsbrand Haagsma
! 34.01: IJsbrand Haagsma
! 40.00, 40.03: Nico Booij
! 40.30: Marcel Zijlema
! 40.31: Marcel Zijlema
! 40.41: Marcel Zijlema
! 40.95: Marcel Zijlema
!
! 1. Updates
!
! 10.02, July 94: New argument INIFIL
! Check on validity period now uses OCDTIM
! 30.74, Nov. 97: Prepared for version with INCLUDE statements
! 30.82, Nov. 98: Introduced recordlength of 1000 for file PRINT to
! avoid error-messages on the Cray-J90 and SGI Origin 200
! 34.01, Feb. 99: Changed STOP statements for MSGERR(4,'message')
! calls
! 34.01, Feb. 99: Opens a file 'screen' when unitnr in swaninit<>6
! 40.00, Feb. 99: Directory separation characters included in init file
! these characters are used in subr FOR
! 40.03, May 00: backslash replaced by CHAR(92) because of problems on Linux
! 40.30, Jan. 03: introduction distributed-memory approach using MPI
! 40.31, Nov. 03: removing HPGL-functionality
! 40.41, Sep. 04: includes speed processors in initialisation file
! 40.41, Oct. 04: common blocks replaced by modules, include files removed
! 40.95, Jun. 08: parallelization of unSWAN using MESSENGER of ADCIRC
!
! 2. Purpose
!
! subroutine initialises a number of common variables
! opens standard input and output files, if necessary
!
! 4. Argument variables
!
! INERR : output Number of the initialisation error
!
INTEGER INERR
!
! INIFIL inp char name of initialisation file
! LREAD inp log if True: command input file must be opened
! and command reading must be initialised
!
LOGICAL LREAD, FILEXI
#ifdef SWAN_MODEL
INTEGER, intent(in) :: ng
CHARACTER INIFIL*40
CHARACTER OUTFIL *40, TSTFIL *40,
#else
CHARACTER INPFIL *40, OUTFIL *40, INIFIL *(*), TSTFIL *40,
#endif
& PLTOPT *4, TIMSTR *24,
& INPFO *40, OUTFO *40, TSTFO *40, TXT*120
CHARACTER (LEN=LENFNM) SCRFIL
INTEGER PRCTIM(6), INIVER, INIVEF
INTEGER PFROPT 40.31
REAL PLPARM(10) 40.31
INTEGER NUMM(10) 40.41
LOGICAL STPNOW
DATA PRCTIM /0,0,0,0,0,0/
!
! version of initialisation file 10.16
INIVER = 4 40.41 40.31
INIVEF = -1 40.00
INERR = 0 34.01
!
IF (PARLL) THEN
IF (.NOT.ALLOCATED(IWEIG)) ALLOCATE(IWEIG(NPROC))
IWEIG = 100
END IF
#ifdef SWAN_MODEL
INIFIL='swaninit'
ILPOS = INDEX ( INIFIL, ' ' )-1
IF (ILPOS.GT.0) THEN
WRITE(INIFIL(ILPOS+1:ILPOS+2),183) ng
END IF
183 FORMAT(I2.2)
!
IF (PARLL) THEN 40.30
ILPOS = INDEX ( INIFIL, ' ' )-1 40.30
WRITE(INIFIL(ILPOS+1:ILPOS+4),13) INODE 40.30
13 FORMAT('-',I3.3) 40.30
END IF 40.30
#endif
!
! see whether initialisation file exists
!
INQUIRE (FILE=INIFIL, EXIST=FILEXI)
IF (FILEXI) THEN
!
! read initialisation file
!
OPEN (11, FILE=INIFIL, STATUS='OLD', 40.41
!CVIS & SHARED, 40.41
& ERR=950) 40.41
READ (11, *, ERR=930, END=930) INIVEF 10.16
IF (INIVEF.GT.INIVER .OR. INIVEF.LE.0) GOTO 935 40.00
READ (11, 120, ERR=930, END=930) INST
READ (11, *, ERR=930, END=930) INPUTF
#ifdef SWAN_MODEL
READ (11, 120, ERR=930, END=930)
#else
READ (11, 120, ERR=930, END=930) INPFIL
#endif
READ (11, *, ERR=930, END=930) PRINTF
READ (11, 120, ERR=930, END=930) OUTFIL
READ (11, *, ERR=930, END=930) PRTEST
READ (11, 120, ERR=930, END=930) TSTFIL
READ (11, *, ERR=930, END=930) SCREEN
READ (11, *, ERR=930, END=930) IUNMAX
READ (11, 130, ERR=930, END=930) COMID
READ (11, 130, ERR=930, END=930) TABC
IF (INIVEF.GE.2) THEN 40.00
READ (11, 130, ERR=930, END=930) DIRCH1
READ (11, 130, ERR=930, END=930) DIRCH2
ELSE
!DOS DIRCH1 = CHAR(47) 40.41 40.03
!DOS DIRCH2 = CHAR(92) 40.03
DIRCH1 = CHAR(92) 40.41 40.30
DIRCH2 = CHAR(47) 40.30
ENDIF
IF (INIVEF.LT.3) THEN
READ (11, 140, ERR=930, END=930) PLTOPT
READ (11, *, ERR=930, END=930) NPLP
READ (11, *, ERR=930, END=930) (PLPARM(II),II=1,NPLP)
READ (11, *, ERR=930, END=930) PFROPT
END IF
READ (11, *, ERR=930, END=930) ITMOPT
IF (INIVEF.GT.3) THEN
IF (PARLL) THEN
DO JJ = 1, NPROC
READ (11, 145, ERR=150, END=150) IW, TXT
CALL TXPBLA(TXT,IF,IL)
IPOS = 0
DO II = IF, IL
K = ICHAR(TXT(II:II))
IF ( K.GE.48 .AND. K.LE.57 ) THEN
IPOS = IPOS + 1
NUMM(IPOS) = K - 48
END IF
END DO
J = 0
DO II = 1, IPOS
J = J + NUMM(II)*10**(IPOS-II)
END DO
IWEIG(J) = IW
END DO
END IF
END IF
120 FORMAT (A40)
130 FORMAT (A1)
140 FORMAT (A4)
145 FORMAT (I5,A)
150 CLOSE (11)
ELSE
!
! REFERENCE NUMBERS AND NAMES OF STANDARD FILES
!
#ifdef SWAN_MODEL
INPUTF = 600+ng
#else
INPUTF = 3
#endif
#ifndef SWAN_MODEL
INPFIL = 'INPUT'
#endif
OUTFIL = 'PRINT'
#ifdef SWAN_MODEL
WRITE(OUTFIL(6:7),181) ng
181 FORMAT(I2.2)
PRINTF = 500+ng
#else
PRINTF = 4
#endif
! unit ref. numbers for output to screen and to separate
! test print file:
PRTEST = PRINTF
TSTFIL = ' '
SCREEN = 6
#ifdef SWAN_MODEL
IUNMAX = 99999999
#else
IUNMAX = 99
#endif
!/SGI IUNMAX = 199
! TABC is the Tab character (interpreted as blank in command reading)
TABC = CHAR(9) 40.69
! COMID is the comment identifier (usually $)
COMID = '$'
! DIRCH1 is directory separation character as appears in input file
! DIRCH2 is directory separation character replacing DIRCH1 40.00
!DOS DIRCH1 = CHAR(47) 40.41 40.03
!DOS DIRCH2 = CHAR(92) 40.03
DIRCH1 = CHAR(92) 40.41 40.30
DIRCH2 = CHAR(47) 40.30
! INST = name of institute, max. 40 characters
INST = 'Delft University of Technology'
ITMOPT = 1
!
ENDIF
INPFO = INPFIL 40.95
OUTFO = OUTFIL 40.30
TSTFO = TSTFIL 40.30
! --- append node number to OUTFIL and TSTFIL 40.30
! in case of parallel computing 40.30
IF (PARLL) THEN 40.30
ILPOS = INDEX ( OUTFIL, ' ' )-1
IF (ILPOS.GT.0) THEN
WRITE(OUTFIL(ILPOS+1:ILPOS+4),180) INODE
ELSE
GOTO 920
END IF
ILPOS = INDEX ( TSTFIL, ' ' )-1
IF (ILPOS.GT.0) THEN
WRITE(TSTFIL(ILPOS+1:ILPOS+4),180) INODE
END IF
180 FORMAT('-',I3.3)
CALL SWSYNC
IF (STPNOW()) RETURN
END IF
!PUN IAMMASTER = MYPROC.EQ.0 40.95
!PUN IF ( MNPROC==1 ) THEN 40.95
!PUN INPUTDIR = '.' 40.95
!PUN LOCALDIR = '.' 40.95
!PUN ELSE 40.95
!PUN CALL MAKE_DIRNAME() 40.95
!PUN ENDIF 40.95
!PUN INPFIL = TRIM(INPUTDIR)//DIRCH2//TRIM(INPFIL) 40.95
!PUN OUTFIL = TRIM(LOCALDIR)//DIRCH2//TRIM(OUTFIL) 40.95
!PUN TSTFIL = TRIM(LOCALDIR)//DIRCH2//TRIM(TSTFIL) 40.95
IF (INIVEF.LT.INIVER) THEN
!
! write initialisation file
!
IF ( IAMMASTER ) THEN
OPEN (12, FILE=INIFIL, STATUS='UNKNOWN', FORM='FORMATTED', 40.00
& ERR=950)
WRITE (12, 210) INIVER, 'version of initialisation file' 10.16
WRITE (12, 220) INST, 'name of institute'
WRITE (12, 210) INPUTF, 'command file ref. number'
WRITE (12, 220) INPFO, 'command file name'
WRITE (12, 210) PRINTF, 'print file ref. number'
WRITE (12, 220) OUTFO, 'print file name' 40.30
WRITE (12, 210) PRTEST, 'test file ref. number'
WRITE (12, 220) TSTFO, 'test file name' 40.30
WRITE (12, 210) SCREEN, 'screen ref. number'
#ifdef SWAN_MODEL
WRITE (12, 211) IUNMAX, 'highest file ref. number'
#else
WRITE (12, 210) IUNMAX, 'highest file ref. number'
#endif
WRITE (12, 230) COMID, 'comment identifier'
WRITE (12, 230) TABC, 'TAB character'
WRITE (12, 230) DIRCH1, 'dir sep char in input file'
WRITE (12, 230) DIRCH2, 'dir sep char replacing previous one' 40.00
WRITE (12, 210) ITMOPT, 'default time coding option'
IF (PARLL) THEN
DO II = 1, NPROC
WRITE (12, 240) IWEIG(II), 'speed of processor ',II
END DO
END IF
CLOSE (12)
ENDIF
210 FORMAT (I5, T41, A)
#ifdef SWAN_MODEL
211 FORMAT (I8, T41, A)
#endif
220 FORMAT (A40, A)
230 FORMAT (A1, T41, A)
240 FORMAT (I5, T41, A19, I3)
ENDIF
!
IUNMIN = 0
FUNLO = 21
!/SGI FUNLO = 103
FUNHI = IUNMAX
!
CALL OCDTIM (PRCTIM)
!
! initialise command reader
!
IF (OUTFIL.NE.' ') THEN
! WRITE (*,*) ' Open print file ', PRINTF, OUTFIL
OPEN (UNIT=PRINTF, FILE=OUTFIL, STATUS='UNKNOWN',
& FORM='FORMATTED', 30.82
!/Cray & RECL=2000, 30.82
!/SGI & RECL=2000, 30.82
& ERR=920) 30.82
! WRITE (*,*) ' Print file opened ', PRINTF, OUTFIL
CALL DTTIST (ITMOPT, TIMSTR, PRCTIM)
WRITE (PRINTF, 12) TIMSTR
12 FORMAT ('1',//,20X, 'Execution started at ',A, //)
ENDIF
IF (PRTEST.NE.PRINTF) THEN
OPEN (UNIT=PRTEST, FILE=TSTFIL, ERR=922)
ENDIF
IF (SCREEN.NE.6) THEN
SCRFIL = 'screen'
OPEN (UNIT=SCREEN, FILE=SCRFIL, ERR=960) 34.01
ENDIF
IF (LREAD) THEN
IF (INPFIL.NE.' ') THEN
OPEN (UNIT=INPUTF, FILE=INPFIL, STATUS='OLD', 40.41
!CVIS & SHARED, 40.41
& ERR=910) 40.41
ENDIF
CALL RDINIT
ENDIF
!
RETURN
!
910 CALL MSGERR(4,'Input file missing') 34.01
RETURN 34.01
!
920 INERR=920 34.01
IF ( IAMMASTER ) 40.95 40.31
& WRITE(*,*) 'Cannot open PRINT file ' 40.31
RETURN 34.01
!
922 CALL MSGERR(4,'Cannot open test file: '//TSTFIL) 34.01
RETURN
!
930 INERR=930 34.01
IF ( IAMMASTER ) 40.95 40.31
& WRITE(*,*) 'Error reading initialisation file ' 40.31
RETURN 34.01
!
935 INERR=935 34.01
IF ( IAMMASTER ) 40.95 40.31
& WRITE(*,*) 'Incorrect version of initialisation file ' 40.31
RETURN 34.01
!
950 INERR=950 34.01
IF ( IAMMASTER ) 40.95 40.31
& WRITE(*,*) 'Error opening initialisation file ' 40.31
RETURN 34.01
!
960 CALL MSGERR(4,'Error opening output file: screen') 34.01
RETURN 34.01
!
END
!*****************************************************************
! *
SUBROUTINE OCDTIM (PRCTIM)
! *
!*****************************************************************
!
! --|-----------------------------------------------------------|--
! | Delft University of Technology |
! | Faculty of Civil Engineering |
! | Environmental Fluid Mechanics Section |
! | P.O. Box 5048, 2600 GA Delft, The Netherlands |
! | |
! | Programmers: The SWAN team |
! --|-----------------------------------------------------------|--
!
!
! SWAN (Simulating WAves Nearshore); a third generation wave model
! Copyright (C) 1993-2017 Delft University of Technology
!
! This program is free software; you can redistribute it and/or
! modify it under the terms of the GNU General Public License as
! published by the Free Software Foundation; either version 2 of
! the License, or (at your option) any later version.
!
! This program is distributed in the hope that it will be useful,
! but WITHOUT ANY WARRANTY; without even the implied warranty of
! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
! GNU General Public License for more details.
!
! A copy of the GNU General Public License is available at
! http://www.gnu.org/copyleft/gpl.html#SEC3
! or by writing to the Free Software Foundation, Inc.,
! 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
!
!
! 0. Authors
!
! 30.07
! 30.70: Nico Booij
! 30.82: IJsbrand Haagsma
! 40.02: IJsbrand Haagsma
!
! 1. Updates
!
! 30.07, Oct. 95: option DEC added
! 30.70, Sep. 97: adaptation in view of year 2000
! 30.82, Mar. 99: Adapted to Fortran 90 standard
! 40.02, Sep. 00: Removed all platform dependent Fortran 77 statements
!
! 2. PURPOSE
!
! get time of processing, using processor dependent routines
!
! 3. PARAMETER LIST
!
! PRCTIM outp int time array: elements: year, month, day,
! hour, minute, second
!
! 4. SUBROUTINES USED
!
! GETDAT, GETTIM or other
!
! 5. ERROR MESSAGES
!
! ----
!
! 6. REMARKS
!
! This function uses a processor dependent subroutines (GETDAT,
! GETTIM), therefore adaptations are necessary when compiled
! at a different computer system environment.
!
! 7. STRUCTURE
!
! ---------------------------------------------------------
! Call DATE and TIME routines (system dependent)
! decode YEAR, MONTH and DAY
! assemble DATE string
! decode HOUR, MINUTE, SECOND
! assemble TIME string
! ---------------------------------------------------------
!
! 8. SOURCE TEXT
!
INTEGER PRCTIM(6)
!
! Call DATE and TIME routines
!
! --------Fortran 90 date-time routines --------
!
CHARACTER TIMSTR *24, CDUMMY *5 30.82
INTEGER IDUMMY(8) 30.82
!
CALL DATE_AND_TIME (TIMSTR(1:8), TIMSTR(10:20), CDUMMY, IDUMMY) 30.70
CALL DTSTTI (1, TIMSTR, PRCTIM) 30.70
RETURN
END SUBROUTINE OCDTIM
!*****************************************************************
! *
SUBROUTINE DTSTTI (IOPT, TIMSTR, DTTIME)
! *
!*****************************************************************
!
! --|-----------------------------------------------------------|--
! | Delft University of Technology |
! | Faculty of Civil Engineering |
! | Environmental Fluid Mechanics Section |
! | P.O. Box 5048, 2600 GA Delft, The Netherlands |
! | |
! | Programmers: The SWAN team |
! --|-----------------------------------------------------------|--
!
!
! SWAN (Simulating WAves Nearshore); a third generation wave model
! Copyright (C) 1993-2017 Delft University of Technology
!
! This program is free software; you can redistribute it and/or
! modify it under the terms of the GNU General Public License as
! published by the Free Software Foundation; either version 2 of
! the License, or (at your option) any later version.
!
! This program is distributed in the hope that it will be useful,
! but WITHOUT ANY WARRANTY; without even the implied warranty of
! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
! GNU General Public License for more details.
!
! A copy of the GNU General Public License is available at
! http://www.gnu.org/copyleft/gpl.html#SEC3
! or by writing to the Free Software Foundation, Inc.,
! 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
!
!
! Updates
!
! ver 30.70, Sep 1997 by N.Booij: adaptation in view year 2000
! 40.89, Nico Booij: integer Jumpyear introduced to prevent problems
! with 2-digit year code
!
! Function:
!
! transform time string into integer time array
!
! Argument list:
!
! IOPT input int option number
! 1: ISO notation 19870530.153000
! 2: (HP compiler): 30-May-87 15:30:00
! 3: (old Lahey) 05/30/87 15:30:00 30.70
! 4: 15:30:00
! 5: 87/05/30 15:30:00
! 6: WAM 8705301530
!
! TIMSTR input char time string
! DTTIME outp int time array: elements: year, month, day,
! hour, minute, second
!
! Remarks:
! Options can be added by the user
! existing options should not be changed
!
! Source:
!
INTEGER :: JUMPYEAR = 30 ! Used in interpretation of 2-digit year code
INTEGER IOPT, DTTIME(6)
CHARACTER MONC(12) *3, MONCI *3
#ifdef SWAN_MODEL
CHARACTER TIMSTR *15
! CHARACTER(*) TIMSTR
#else
CHARACTER(*) TIMSTR
#endif
DATA MONC /'JAN', 'FEB', 'MAR', 'APR', 'MAY', 'JUN', 'JUL',
& 'AUG', 'SEP', 'OCT', 'NOV', 'DEC'/
!
IF (IOPT.EQ.1) THEN
READ (TIMSTR, '(I4,I2,I2,1X,3I2)', ERR=98) (DTTIME(II), II=1,6)
ELSE IF (IOPT.EQ.2) THEN
READ (TIMSTR, '(I2,1X,A3,1X,I2,3(1X,I2))', ERR=98)
& DTTIME(3), MONCI, DTTIME(1), (DTTIME(II), II=4,6)
IF (DTTIME(1).LT.JUMPYEAR) THEN 40.89 30.70
DTTIME(1) = 2000 + DTTIME(1) 30.70
ELSE
DTTIME(1) = 1900 + DTTIME(1)
ENDIF
DTTIME(2) = 0
DO 20 IMM = 1, 12 !!
CALL UPCASE (MONCI)
IF (MONCI.NE.MONC(IMM)) GOTO 20
DTTIME(2) = IMM
GOTO 90
20 CONTINUE !!
CALL MSGERR (2, 'incorrect month string: '//MONCI) 40.00
ELSE IF (IOPT.EQ.3) THEN
READ (TIMSTR, '(I2,5(1X,I2))', ERR=98)
& DTTIME(2), DTTIME(3), DTTIME(1), (DTTIME(II), II=4,6)
IF (DTTIME(1).LT.JUMPYEAR) THEN 40.89 30.70
DTTIME(1) = 2000 + DTTIME(1) 30.70
ELSE
DTTIME(1) = 1900 + DTTIME(1)
ENDIF
ELSE IF (IOPT.EQ.4) THEN
READ (TIMSTR, '(I2,2(1X,I2))', ERR=98) (DTTIME(II), II=4,6)
DO 40 II = 1, 3
DTTIME(II) = 0
40 CONTINUE
ELSE IF (IOPT.EQ.5) THEN 30.11
READ (TIMSTR, '(I2,5(1X,I2))', ERR=98) (DTTIME(II), II=1,6) 30.11
IF (DTTIME(1).LT.JUMPYEAR) THEN 40.89 30.70
DTTIME(1) = 2000 + DTTIME(1) 30.70
ELSE
DTTIME(1) = 1900 + DTTIME(1)
ENDIF
ELSE IF (IOPT.EQ.6) THEN 30.11
READ (TIMSTR, '(5I2)', ERR=98) (DTTIME(II), II=1,5)
DTTIME(6) = 0.
IF (DTTIME(1).LT.JUMPYEAR) THEN 40.89 30.70
DTTIME(1) = 2000 + DTTIME(1) 30.70
ELSE
DTTIME(1) = 1900 + DTTIME(1)
ENDIF
ELSE
CALL MSGERR (2, 'wrong time coding option in subroutine DTSTTI')
ENDIF
90 RETURN
98 CALL MSGERR (2, 'time string unreadable: '//TIMSTR)
RETURN
END
!*****************************************************************
! *
SUBROUTINE DTTIST (IOPT, TIMSTR, DTTIME)
! *
!*****************************************************************
!
! --|-----------------------------------------------------------|--
! | Delft University of Technology |
! | Faculty of Civil Engineering |
! | Environmental Fluid Mechanics Section |
! | P.O. Box 5048, 2600 GA Delft, The Netherlands |
! | |
! | Programmers: The SWAN team |
! --|-----------------------------------------------------------|--
!
!
! SWAN (Simulating WAves Nearshore); a third generation wave model
! Copyright (C) 1993-2017 Delft University of Technology
!
! This program is free software; you can redistribute it and/or
! modify it under the terms of the GNU General Public License as
! published by the Free Software Foundation; either version 2 of
! the License, or (at your option) any later version.
!
! This program is distributed in the hope that it will be useful,
! but WITHOUT ANY WARRANTY; without even the implied warranty of
! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
! GNU General Public License for more details.
!
! A copy of the GNU General Public License is available at
! http://www.gnu.org/copyleft/gpl.html#SEC3
! or by writing to the Free Software Foundation, Inc.,
! 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
!
!
! Updates
!
! ver 30.70, Sep 1997 by N.Booij: adaptation in view year 2000
!
! Function:
!
! transform integer time array into time string
!
! Argument list:
!
! IOPT input int option number (see subr. DTSTTI)
! TIMSTR outp char time string
! DTTIME input int time array: elements: year, month, day,
! hour, minute, second
!
! Source:
!
INTEGER IOPT, DTTIME(6)
CHARACTER TIMSTR *24, MONC(12) *3
DATA MONC /'Jan', 'Feb', 'Mar', 'Apr', 'May', 'Jun', 'Jul',
& 'Aug', 'Sep', 'Oct', 'Nov', 'Dec'/
!
TIMSTR = ' '
IF (IOPT.EQ.1) THEN
WRITE (TIMSTR, 12) (DTTIME(II), II=1,6)
12 FORMAT (I4,I2,I2,'.',3I2)
LTS = 15
ELSE IF (IOPT.EQ.2) THEN
IF (DTTIME(1).GE.2000) THEN 30.70
DTTIME(1) = DTTIME(1) - 2000 30.70
ELSE
DTTIME(1) = DTTIME(1) - 1900 30.70
ENDIF
WRITE (TIMSTR, 22) DTTIME(3), MONC(DTTIME(2)), DTTIME(1), 30.70
& (DTTIME(II), II=4,6)
22 FORMAT (I2,'-',A3,'-',I2,'.',I2,':',I2,':',I2)
LTS = 18
ELSE IF (IOPT.EQ.3) THEN
IF (DTTIME(1).GE.2000) THEN 30.70
DTTIME(1) = DTTIME(1) - 2000 30.70
ELSE
DTTIME(1) = DTTIME(1) - 1900 30.70
ENDIF
WRITE (TIMSTR, 32)
& DTTIME(2), DTTIME(3), DTTIME(1), (DTTIME(II), II=4,6) 30.70
32 FORMAT (I2,'/',I2,'/',I2,'.',I2,':',I2,':',I2)
LTS = 17
ELSE IF (IOPT.EQ.4) THEN
WRITE (TIMSTR, 42) (DTTIME(II), II=4,6)
42 FORMAT (I2,':',I2,':',I2)
LTS = 8
ELSE IF (IOPT.EQ.5) THEN 30.11
IF (DTTIME(1).GE.2000) THEN 30.70
DTTIME(1) = DTTIME(1) - 2000 30.70
ELSE
DTTIME(1) = DTTIME(1) - 1900 30.70
ENDIF
WRITE (TIMSTR, 52) (DTTIME(II), II= 1,6) 30.70
52 FORMAT (I2,'/',I2,'/',I2,'.',I2,':',I2,':',I2)
LTS = 17
ELSE IF (IOPT.EQ.6) THEN 30.11
IF (DTTIME(1).GE.2000) THEN 30.70
DTTIME(1) = DTTIME(1) - 2000 30.70
ELSE
DTTIME(1) = DTTIME(1) - 1900 30.70
ENDIF
WRITE (TIMSTR, 62) (DTTIME(II), II=1,5) 30.70
62 FORMAT (5I2)
LTS = 10
ELSE
CALL MSGERR (2, 'wrong time coding option in subroutine DTTIST')
ENDIF
!
DO 94 IC = 1, LTS
IF (TIMSTR(IC:IC).EQ.' ') TIMSTR(IC:IC) = '0'
94 CONTINUE
!
RETURN
END