!WRF+/TL:MEDIATION_LAYER:SOLVER FOR TL
!Created by Xin Zhang and Ning Pan, 2010-08
SUBROUTINE solve_em_tl ( grid , config_flags &
! Arguments generated from Registry
#include "dummy_new_args.inc"
!
)
! Driver layer modules
USE module_state_description
USE module_domain, ONLY : &
domain, get_ijk_from_grid, get_ijk_from_subgrid &
,domain_get_current_time, domain_get_start_time &
,domain_get_sim_start_time, domain_clock_get,is_alarm_tstep
USE module_domain_type, ONLY : history_alarm, restart_alarm
USE module_configure, ONLY : grid_config_rec_type
USE module_driver_constants
USE module_machine
USE module_tiles, ONLY : set_tiles
#ifdef DM_PARALLEL
USE module_dm, ONLY : &
local_communicator, mytask, ntasks, ntasks_x, ntasks_y &
,local_communicator_periodic, wrf_dm_maxval
USE module_comm_dm, ONLY : &
halo_em_a_tl_sub,halo_em_b_tl_sub,halo_em_c2_tl_sub,halo_em_chem_e_3_sub &
,halo_em_chem_e_5_sub,halo_em_chem_e_7_sub,halo_em_chem_old_e_5_sub &
,halo_em_chem_old_e_7_sub,halo_em_c_tl_sub,halo_em_d2_3_tl_sub &
,halo_em_d2_5_tl_sub,halo_em_d3_3_tl_sub,halo_em_d3_5_tl_sub,halo_em_d_tl_sub &
,halo_em_e_3_tl_sub,halo_em_e_5_tl_sub,halo_em_hydro_uv_tl_sub &
,halo_em_moist_e_3_tl_sub,halo_em_moist_e_5_tl_sub,halo_em_moist_e_7_tl_sub &
,halo_em_moist_old_e_5_tl_sub,halo_em_moist_old_e_7_tl_sub &
,halo_em_scalar_e_3_sub,halo_em_scalar_e_5_sub,halo_em_scalar_e_7_sub &
,halo_em_scalar_old_e_5_sub,halo_em_scalar_old_e_7_sub,halo_em_tke_3_tl_sub &
,halo_em_tke_5_tl_sub,halo_em_tke_7_tl_sub,halo_em_tke_advect_3_tl_sub &
,halo_em_tke_advect_5_tl_sub,halo_em_tke_old_e_5_tl_sub &
,halo_em_tke_old_e_7_tl_sub,halo_em_tracer_e_3_tl_sub,halo_em_tracer_e_5_tl_sub &
,halo_em_tracer_e_7_tl_sub,halo_em_tracer_old_e_5_tl_sub &
,halo_em_tracer_old_e_7_tl_sub,period_bdy_em_a_sub,halo_em_sbm_tl_sub &
,period_bdy_em_b3_sub,period_bdy_em_b_sub,period_bdy_em_chem2_sub &
,period_bdy_em_chem_old_sub,period_bdy_em_chem_sub,period_bdy_em_d3_sub &
,period_bdy_em_d_sub,period_bdy_em_e_sub,period_bdy_em_moist2_sub &
,period_bdy_em_moist_old_sub,period_bdy_em_moist_sub &
,period_bdy_em_scalar2_sub,period_bdy_em_scalar_old_sub &
,period_bdy_em_scalar_sub,period_bdy_em_tke_old_sub,period_bdy_em_tke_sub &
,period_bdy_em_tracer2_sub,period_bdy_em_tracer_old_sub &
,period_bdy_em_tracer_sub,period_em_da_sub,period_em_hydro_uv_sub
#endif
USE module_utility
! Mediation layer modules
! Model layer modules
USE module_model_constants
USE g_module_small_step_em
USE module_em
USE g_module_em
USE g_module_big_step_utilities_em
USE g_module_bc
USE module_bc_em
USE g_module_bc_em
USE module_solvedebug_em
USE g_module_physics_addtendc
USE g_module_diffusion_em
USE module_polarfft
USE g_module_microphysics_driver
USE module_microphysics_zero_out
USE g_module_microphysics_zero_out
USE module_fddaobs_driver
! USE module_diagnostics
#if (WRF_CHEM==1)
USE module_input_chem_data
USE module_input_tracer
USE module_chem_utilities
#endif
USE g_module_first_rk_step_part1
USE g_module_first_rk_step_part2
USE module_after_all_rk_steps
USE module_llxy, ONLY : proj_cassini
USE module_avgflx_em, ONLY : zero_avgflx, upd_avgflx
IMPLICIT NONE
! Input data.
TYPE(domain) , TARGET :: grid
! Definitions of dummy arguments to this routine (generated from Registry).
#include "dummy_new_decl.inc"
! Structure that contains run-time configuration (namelist) data for domain
TYPE (grid_config_rec_type) , INTENT(IN) :: config_flags
! Local data
INTEGER :: k_start , k_end, its, ite, jts, jte
INTEGER :: ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
ips , ipe , jps , jpe , kps , kpe
INTEGER :: sids , side , sjds , sjde , skds , skde , &
sims , sime , sjms , sjme , skms , skme , &
sips , sipe , sjps , sjpe , skps , skpe
INTEGER :: imsx, imex, jmsx, jmex, kmsx, kmex, &
ipsx, ipex, jpsx, jpex, kpsx, kpex, &
imsy, imey, jmsy, jmey, kmsy, kmey, &
ipsy, ipey, jpsy, jpey, kpsy, kpey
INTEGER :: ij , iteration
INTEGER :: im , num_3d_m , ic , num_3d_c , is , num_3d_s
INTEGER :: loop
INTEGER :: sz
INTEGER :: iswater
LOGICAL :: specified_bdy, channel_bdy
REAL :: t_new
! Changes in tendency at this timestep
real ,DIMENSION(grid%sm31:grid%em31,grid%sm32:grid%em32,grid%sm33:grid%em33) :: h_tendency, &
z_tendency
real ,DIMENSION(grid%sm31:grid%em31,grid%sm32:grid%em32,grid%sm33:grid%em33) :: g_h_tendency, &
g_z_tendency
! Whether advection should produce decoupled horizontal and vertical advective tendency outputs
LOGICAL :: tenddec
! Flag for producing diagnostic fields (e.g., radar reflectivity)
LOGICAL :: diag_flag
#if (WRF_CHEM==1)
! Index cross-referencing array for tendency accumulation
INTEGER, DIMENSION( num_chem ) :: adv_ct_indices
#endif
! storage for tendencies and decoupled state (generated from Registry)
#include "i1_decl.inc"
! Previous time level of tracer arrays now defined as i1 variables;
! the state 4d arrays now redefined as 1-time level arrays in Registry.
! Benefit: save memory in nested runs, since only 1 domain is active at a
! time. Potential problem on stack-limited architectures: increases
! amount of data on program stack by making these automatic arrays.
INTEGER :: rc
INTEGER :: number_of_small_timesteps, rk_step
INTEGER :: klevel,ijm,ijp,i,j,k,size1,size2 ! for prints/plots only
INTEGER :: idum1, idum2, dynamics_option
INTEGER :: rk_order, iwmax, jwmax, kwmax
REAL :: dt_rk, dts_rk, dts, dtm, wmax
REAL , ALLOCATABLE , DIMENSION(:) :: max_vert_cfl_tmp, max_horiz_cfl_tmp
LOGICAL :: leapfrog
INTEGER :: l,kte,kk
LOGICAL :: f_flux ! flag for computing averaged fluxes in cu_gd
REAL :: curr_secs, curr_secs2
INTEGER :: num_sound_steps
INTEGER :: idex, jdex
REAL :: max_msft
REAL :: spacing
INTEGER :: ii, jj !kk is above after l,kte
REAL :: dclat
INTEGER :: debug_level
! urban related variables
INTEGER :: NUM_ROOF_LAYERS, NUM_WALL_LAYERS, NUM_ROAD_LAYERS ! urban
TYPE(WRFU_TimeInterval) :: tmpTimeInterval, tmpTimeInterval2
REAL :: real_time
LOGICAL :: adapt_step_flag
LOGICAL :: fill_w_flag
! variables for flux-averaging code 20091223
CHARACTER*256 :: message, message2
REAL :: old_dt
TYPE(WRFU_Time) :: temp_time, CurrTime, restart_time
INTEGER, PARAMETER :: precision = 100
INTEGER :: num, den
TYPE(WRFU_TimeInterval) :: dtInterval, intervaltime,restartinterval
! Define benchmarking timers if -DBENCH is compiled
#include "bench_solve_em_def.h"
!----------------------
! Executable statements
!----------------------
!<DESCRIPTION>
!<pre>
! solve_em_tl is the main driver for advancing a grid a single timestep.
! It is a mediation-layer routine -> DM and SM calls are made where
! needed for parallel processing.
!
! solve_em_tl can integrate the equations using 3 time-integration methods
!
! - 3rd order Runge-Kutta time integration (recommended)
!
! - 2nd order Runge-Kutta time integration
!
! The main sections of solve_em_tl are
!
! (1) Runge-Kutta (RK) loop
!
! (2) Non-timesplit physics (i.e., tendencies computed for updating
! model state variables during the first RK sub-step (loop)
!
! (3) Small (acoustic, sound) timestep loop - within the RK sub-steps
!
! (4) scalar advance for moist and chem scalar variables (and TKE)
! within the RK sub-steps.
!
! (5) time-split physics (after the RK step), currently this includes
! only microphyics
!
! A more detailed description of these sections follows.
!</pre>
!</DESCRIPTION>
! Initialize timers if compiled with -DBENCH
#include "bench_solve_em_init.h"
! set runge-kutta solver (2nd or 3rd order)
dynamics_option = config_flags%rk_ord
! Obtain dimension information stored in the grid data structure.
CALL get_ijk_from_grid ( grid , &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
imsx, imex, jmsx, jmex, kmsx, kmex, &
ipsx, ipex, jpsx, jpex, kpsx, kpex, &
imsy, imey, jmsy, jmey, kmsy, kmey, &
ipsy, ipey, jpsy, jpey, kpsy, kpey )
CALL get_ijk_from_subgrid ( grid , &
sids, side, sjds, sjde, skds, skde, &
sims, sime, sjms, sjme, skms, skme, &
sips, sipe, sjps, sjpe, skps, skpe )
k_start = kps
k_end = kpe
num_3d_m = num_moist
num_3d_c = num_chem
num_3d_s = num_scalar
f_flux = config_flags%do_avgflx_cugd .EQ. 1
! Compute these starting and stopping locations for each tile and number of tiles.
! See: http://www.mmm.ucar.edu/wrf/WG2/topics/settiles
CALL set_tiles ( ZONE_SOLVE_EM, grid , ids , ide , jds , jde , ips , ipe , jps , jpe )
! CALL set_tiles ( grid , ids , ide , jds , jde , ips , ipe , jps , jpe )
! Max values of CFL for adaptive time step scheme
ALLOCATE (max_vert_cfl_tmp(grid%num_tiles))
ALLOCATE (max_horiz_cfl_tmp(grid%num_tiles))
!
! Calculate current time in seconds since beginning of model run.
! Unfortunately, ESMF does not seem to have a way to return
! floating point seconds based on a TimeInterval. So, we will
! calculate it here--but, this is not clean!!
!
tmpTimeInterval = domain_get_current_time ( grid ) - domain_get_sim_start_time ( grid )
tmpTimeInterval2 = domain_get_current_time ( grid ) - domain_get_start_time ( grid )
curr_secs = real_time(tmpTimeInterval)
curr_secs2 = real_time(tmpTimeInterval2)
old_dt = grid%dt ! store old time step for flux averaging code at end of RK loop
!-----------------------------------------------------------------------------
! Adaptive time step: Added by T. Hutchinson, WSI 3/5/07
! In this call, we do the time-step adaptation and set time-dependent lateral
! boundary condition nudging weights.
!
IF ( (config_flags%use_adaptive_time_step) .and. &
( (.not. grid%nested) .or. &
( (grid%nested) .and. (abs(grid%dtbc) < 0.0001) ) ) )THEN
CALL adapt_timestep(grid, config_flags)
adapt_step_flag = .TRUE.
ELSE
adapt_step_flag = .FALSE.
ENDIF
! End of adaptive time step modifications
!-----------------------------------------------------------------------------
!
! Set diagnostic flag value history output time
!-----------------------------------------------------------------------------
! if ( Is_alarm_tstep(grid_clock, grid_alarms(HISTORY_ALARM)) ) then
diag_flag = .false.
if ( Is_alarm_tstep(grid%domain_clock, grid%alarms(HISTORY_ALARM)) ) then
diag_flag = .true.
endif
grid%itimestep = grid%itimestep + 1
IF (config_flags%enable_identity) RETURN
IF (config_flags%polar) dclat = 90./REAL(jde-jds) !(0.5 * 180/ny)
rk_order = config_flags%rk_ord
IF ( grid%time_step_sound == 0 ) THEN
! This function will give 4 for 6*dx and 6 for 10*dx and returns even numbers only
spacing = min(grid%dx, grid%dy)
IF ( ( config_flags%use_adaptive_time_step ) .AND. ( config_flags%map_proj == PROJ_CASSINI ) ) THEN
max_msft=MIN ( MAX(grid%max_msftx, grid%max_msfty) , &
1.0/COS(config_flags%fft_filter_lat*degrad) )
num_sound_steps = max ( 2 * ( INT (300. * grid%dt / (spacing / max_msft) - 0.01 ) + 1 ), 4 )
ELSE IF ( config_flags%use_adaptive_time_step ) THEN
max_msft= MAX(grid%max_msftx, grid%max_msfty)
num_sound_steps = max ( 2 * ( INT (300. * grid%dt / (spacing / max_msft) - 0.01 ) + 1 ), 4 )
ELSE
num_sound_steps = max ( 2 * ( INT (300. * grid%dt / spacing - 0.01 ) + 1 ), 4 )
END IF
WRITE(wrf_err_message,*)'grid spacing, dt, time_step_sound=',spacing,grid%dt,num_sound_steps
CALL wrf_debug ( 50 , wrf_err_message )
ELSE
num_sound_steps = grid%time_step_sound
ENDIF
dts = grid%dt/float(num_sound_steps)
IF (config_flags%use_adaptive_time_step) THEN
CALL get_wrf_debug_level( debug_level )
IF ((config_flags%time_step < 0) .AND. (debug_level.GE.50)) THEN
#ifdef DM_PARALLEL
CALL wrf_dm_maxval(grid%max_vert_cfl, idex, jdex)
#endif
WRITE(wrf_err_message,*)'variable dt, max horiz cfl, max vert cfl: ',&
grid%dt, grid%max_horiz_cfl, grid%max_vert_cfl
CALL wrf_debug ( 0 , wrf_err_message )
ENDIF
grid%max_cfl_val = 0
grid%max_horiz_cfl = 0
grid%max_vert_cfl = 0
ENDIF
! setting bdy tendencies to zero for DFI if constant_bc = true
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
! IF( config_flags%specified .AND. grid%dfi_opt .NE. DFI_NODFI &
! .AND. config_flags%constant_bc .AND. (grid%dfi_stage .EQ. DFI_BCK .OR. grid%dfi_stage .EQ. DFI_FWD) ) THEN
IF( config_flags%specified .AND. config_flags%constant_bc ) THEN
CALL g_zero_bdytend (grid%u_btxs,grid%g_u_btxs,grid%u_btxe,grid%g_u_btxe, &
grid%u_btys,grid%g_u_btys,grid%u_btye,grid%g_u_btye, &
grid%v_btxs,grid%g_v_btxs,grid%v_btxe,grid%g_v_btxe, &
grid%v_btys,grid%g_v_btys,grid%v_btye,grid%g_v_btye, &
grid%ph_btxs,grid%g_ph_btxs,grid%ph_btxe,grid%g_ph_btxe, &
grid%ph_btys,grid%g_ph_btys,grid%ph_btye,grid%g_ph_btye, &
grid%t_btxs,grid%g_t_btxs,grid%t_btxe,grid%g_t_btxe, &
grid%t_btys,grid%g_t_btys,grid%t_btye,grid%g_t_btye, &
grid%w_btxs,grid%g_w_btxs,grid%w_btxe,grid%g_w_btxe, &
grid%w_btys,grid%g_w_btys,grid%w_btye,grid%g_w_btye, &
grid%mu_btxs,grid%g_mu_btxs,grid%mu_btxe,grid%g_mu_btxe, &
grid%mu_btys,grid%g_mu_btys,grid%mu_btye,grid%g_mu_btye, &
moist_btxs,g_moist_btxs,moist_btxe,g_moist_btxe, &
moist_btys,g_moist_btys,moist_btye,g_moist_btye, &
scalar_btxs,g_scalar_btxs,scalar_btxe,g_scalar_btxe, &
scalar_btys,g_scalar_btys,scalar_btye,g_scalar_btye, &
grid%spec_bdy_width,num_3d_m,num_3d_s, &
ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
ips,ipe, jps,jpe, kps,kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
ENDIF
ENDDO
!$OMP END PARALLEL DO
!**********************************************************************
!
! LET US BEGIN.......
!
!<DESCRIPTION>
!<pre>
! (1) RK integration loop is named the "Runge_Kutta_loop:"
!
! Predictor-corrector type time integration.
! Advection terms are evaluated at time t for the predictor step,
! and advection is re-evaluated with the latest predicted value for
! each succeeding time corrector step
!
! 2nd order Runge Kutta (rk_order = 2):
! Step 1 is taken to the midpoint predictor, step 2 is the full step.
!
! 3rd order Runge Kutta (rk_order = 3):
! Step 1 is taken to from t to dt/3, step 2 is from t to dt/2,
! and step 3 is from t to dt.
!
! non-timesplit physics are evaluated during first RK step and
! these physics tendencies are stored for use in each RK pass.
!</pre>
!</DESCRIPTION>
!**********************************************************************
Runge_Kutta_loop: DO rk_step = 1, rk_order
! Set the step size and number of small timesteps for
! each part of the timestep
dtm = grid%dt
IF ( rk_order == 1 ) THEN
write(wrf_err_message,*)' leapfrog removed, error exit for dynamics_option = ',dynamics_option
CALL wrf_error_fatal( wrf_err_message )
ELSE IF ( rk_order == 2 ) THEN ! 2nd order Runge-Kutta timestep
IF ( rk_step == 1) THEN
dt_rk = 0.5*grid%dt
dts_rk = dts
number_of_small_timesteps = num_sound_steps/2
ELSE
dt_rk = grid%dt
dts_rk = dts
number_of_small_timesteps = num_sound_steps
ENDIF
ELSE IF ( rk_order == 3 ) THEN ! third order Runge-Kutta
IF ( rk_step == 1) THEN
dt_rk = grid%dt/3.
dts_rk = dt_rk
number_of_small_timesteps = 1
ELSE IF (rk_step == 2) THEN
dt_rk = 0.5*grid%dt
dts_rk = dts
number_of_small_timesteps = num_sound_steps/2
ELSE
dt_rk = grid%dt
dts_rk = dts
number_of_small_timesteps = num_sound_steps
ENDIF
ELSE
write(wrf_err_message,*)' unknown solver, error exit for dynamics_option = ',dynamics_option
CALL wrf_error_fatal( wrf_err_message )
END IF
! Ensure that polar meridional velocity is zero
IF (config_flags%polar) THEN
WRITE(wrf_err_message,*)'solve_em_tl: please revisit polar = ',config_flags%polar
CALL wrf_error_fatal(TRIM(wrf_err_message))
! !$OMP PARALLEL DO &
! !$OMP PRIVATE ( ij )
! DO ij = 1 , grid%num_tiles
! CALL zero_pole ( grid%v_1, &
! ids, ide, jds, jde, kds, kde, &
! ims, ime, jms, jme, kms, kme, &
! grid%i_start(ij), grid%i_end(ij), &
! grid%j_start(ij), grid%j_end(ij), &
! k_start, k_end )
! CALL zero_pole ( grid%v_2, &
! ids, ide, jds, jde, kds, kde, &
! ims, ime, jms, jme, kms, kme, &
! grid%i_start(ij), grid%i_end(ij), &
! grid%j_start(ij), grid%j_end(ij), &
! k_start, k_end )
! END DO
! !$OMP END PARALLEL DO
END IF
!
! Time level t is in the *_2 variable in the first part
! of the step, and in the *_1 variable after the predictor.
! the latest predicted values are stored in the *_2 variables.
!
CALL wrf_debug ( 200 , ' call g_rk_step_prep ' )
BENCH_START(g_step_prep_tim)
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
CALL g_rk_step_prep ( config_flags, rk_step, &
grid%u_2, grid%g_u_2, grid%v_2, grid%g_v_2, &
grid%w_2, grid%g_w_2, grid%t_2, grid%g_t_2, &
grid%ph_2, grid%g_ph_2, grid%mu_2, grid%g_mu_2, &
moist, g_moist, &
grid%ru, grid%g_ru, grid%rv, grid%g_rv, grid%rw, grid%g_rw, &
grid%ww, grid%g_ww, grid%php, grid%g_php, grid%alt, grid%g_alt, &
grid%muu, grid%g_muu, grid%muv, grid%g_muv, &
grid%mub, grid%mut, grid%g_mut, &
grid%phb, grid%pb, grid%p, grid%g_p, grid%al, grid%g_al, grid%alb, &
cqu, g_cqu, cqv, g_cqv, cqw, g_cqw, &
grid%msfux, grid%msfuy, grid%msfvx, grid%msfvx_inv, &
grid%msfvy, grid%msftx, grid%msfty, &
grid%fnm, grid%fnp, grid%dnw, grid%rdx, grid%rdy, &
num_3d_m, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
END DO
!$OMP END PARALLEL DO
BENCH_END(g_step_prep_tim)
#ifdef DM_PARALLEL
!-----------------------------------------------------------------------
! Stencils for patch communications (WCS, 29 June 2001)
! Note: the small size of this halo exchange reflects the
! fact that we are carrying the uncoupled variables
! as state variables in the mass coordinate model, as
! opposed to the coupled variables as in the height
! coordinate model.
!
! * * * * *
! * * * * * * * * *
! * + * * + * * * + * *
! * * * * * * * * *
! * * * * *
!
! 3D variables - note staggering! ru(X), rv(Y), ww(Z), php(Z)
!
! ru x
! rv x
! ww x
! php x
! alt x
! ph_2 x
! phb x
!
! the following are 2D (xy) variables
!
! muu x
! muv x
! mut x
!--------------------------------------------------------------
# include "HALO_EM_A_TL.inc"
#endif
! set boundary conditions on variables
! from big_step_prep for use in big_step_proc
#ifdef DM_PARALLEL
# include "PERIOD_BDY_EM_A.inc"
#endif
BENCH_START(g_set_phys_bc_tim)
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij, ii, jj, kk )
DO ij = 1 , grid%num_tiles
CALL wrf_debug ( 200 , ' call g_rk_phys_bc_dry_1' )
CALL g_rk_phys_bc_dry_1( config_flags, grid%ru,grid%g_ru, grid%rv,grid%g_rv, &
grid%rw,grid%g_rw, grid%ww,grid%g_ww, &
grid%muu,grid%g_muu, grid%muv,grid%g_muv, grid%mut,grid%g_mut, &
grid%php,grid%g_php, grid%alt,grid%g_alt, grid%p,grid%g_p, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
CALL g_set_physical_bc3d( grid%al,grid%g_al, 'p', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
CALL g_set_physical_bc3d( grid%ph_2,grid%g_ph_2, 'w', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
IF (config_flags%polar) THEN
WRITE(wrf_err_message,*)'solve_em_tl: please revisit polar = ',config_flags%polar
CALL wrf_error_fatal(TRIM(wrf_err_message))
!-------------------------------------------------------
! lat-lon grid pole-point (v) specification (extrapolate v, rv to the pole)
!-------------------------------------------------------
! CALL pole_point_bc ( grid%v_1, &
! ids, ide, jds, jde, kds, kde, &
! ims, ime, jms, jme, kms, kme, &
! grid%i_start(ij), grid%i_end(ij), &
! grid%j_start(ij), grid%j_end(ij), &
! k_start, k_end )
! CALL pole_point_bc ( grid%v_2, &
! ids, ide, jds, jde, kds, kde, &
! ims, ime, jms, jme, kms, kme, &
! grid%i_start(ij), grid%i_end(ij), &
! grid%j_start(ij), grid%j_end(ij), &
! k_start, k_end )
!-------------------------------------------------------
! end lat-lon grid pole-point (v) specification
!-------------------------------------------------------
ENDIF
END DO
!$OMP END PARALLEL DO
BENCH_END(g_set_phys_bc_tim)
rk_step_is_one : IF (rk_step == 1) THEN ! only need to initialize diffusion tendencies
!<DESCRIPTION>
!<pre>
!(2) The non-timesplit physics begins with a call to "phy_prep"
! (which computes some diagnostic variables such as temperature,
! pressure, u and v at p points, etc). This is followed by
! calls to the physics drivers:
!
! radiation,
! surface,
! pbl,
! cumulus,
! fddagd,
! 3D TKE and mixing.
!<pre>
!</DESCRIPTION>
CALL g_first_rk_step_part1 ( grid , config_flags &
, moist , g_moist, moist_tend, g_moist_tend &
, chem , chem_tend &
, tracer, g_tracer, tracer_tend, g_tracer_tend &
, scalar , g_scalar, scalar_tend, g_scalar_tend &
, fdda3d, fdda2d &
, aerod &
, ru_tendf,g_ru_tendf,rv_tendf,g_rv_tendf &
, rw_tendf,g_rw_tendf, t_tendf ,g_t_tendf &
, ph_tendf,g_ph_tendf, mu_tendf,g_mu_tendf &
, tke_tend,g_tke_tend &
, config_flags%use_adaptive_time_step &
, curr_secs &
, psim ,psih &
, gz1oz0 , chklowq &
, cu_act_flag , hol , th_phy ,g_th_phy &
, pi_phy ,g_pi_phy, p_phy ,g_p_phy, grid%t_phy ,grid%g_t_phy &
, dz8w ,g_dz8w , p8w ,g_p8w , t8w ,g_t8w &
, ids, ide, jds, jde, kds, kde &
, ims, ime, jms, jme, kms, kme &
, ips, ipe, jps, jpe, kps, kpe &
, imsx,imex,jmsx,jmex,kmsx,kmex &
, ipsx,ipex,jpsx,jpex,kpsx,kpex &
, imsy,imey,jmsy,jmey,kmsy,kmey &
, ipsy,ipey,jpsy,jpey,kpsy,kpey &
, k_start , k_end &
, f_flux &
)
#ifdef DM_PARALLEL
IF ( config_flags%bl_pbl_physics == MYNNPBLSCHEME2 .OR. &
config_flags%bl_pbl_physics == MYNNPBLSCHEME3 ) THEN
# include "HALO_EM_SCALAR_E_5.inc"
ENDIF
#endif
CALL g_first_rk_step_part2 ( grid , config_flags &
, moist ,g_moist , moist_tend ,g_moist_tend &
!!!!! USE THE STATEMENTS REMARKED WHEN chem is NEEDED. Ning Pan, 2010-08-20
! , chem ,g_chem , chem_tend ,g_chem_tend &
, chem , chem , chem_tend , chem_tend &
, tracer, g_tracer, tracer_tend, g_tracer_tend &
, scalar,g_scalar, scalar_tend,g_scalar_tend &
!!!!! USE THE STATEMENT REMARKED WHEN fdda3d and fdda2d ARE NEEDED. Ning Pan, 2010-08-20
! , fdda3d,g_fdda3d, fdda2d,g_fdda2d &
!!!!! REMOVE THE FOLLOWING STATEMENT WHEN fdda3d and fdda2d ARE NEEDED. Ning Pan, 2010-08-20
, fdda3d, fdda3d, fdda2d, fdda2d &
, ru_tendf,g_ru_tendf, rv_tendf,g_rv_tendf &
, rw_tendf,g_rw_tendf, t_tendf ,g_t_tendf &
, ph_tendf,g_ph_tendf, mu_tendf,g_mu_tendf &
, tke_tend,g_tke_tend &
, adapt_step_flag , curr_secs &
!!!!! USE THE STATEMENTS REMARKED WHEN CODING TL OF PHYSICS. Ning Pan, 2010-08-20
! , psim ,g_psim , psih ,g_psih , wspd ,g_wspd , &
! gz1oz0 ,g_gz1oz0 , br ,g_br , chklowq,g_chklowq &
! , cu_act_flag , hol ,g_hol, th_phy,g_th_phy &
!!!!! REMOVE THE FOLLOWING 3 STATEMENTS WHEN CODING TL OF PHYSICS. Ning Pan, 2010-08-20
, psim , psim , psih , psih , &
!201602 gz1oz0 , gz1oz0 , br , br , chklowq, chklowq &
!201602: br became a state variable and was removed from the argument
gz1oz0 , gz1oz0 , chklowq, chklowq &
, cu_act_flag , hol , hol, th_phy,g_th_phy &
, pi_phy ,g_pi_phy, p_phy ,g_p_phy , grid%t_phy ,grid%g_t_phy &
, dz8w ,g_dz8w , p8w ,g_p8w , t8w ,g_t8w &
, nba_mij,g_nba_mij, num_nba_mij &
, nba_rij,g_nba_rij, num_nba_rij &
, ids, ide, jds, jde, kds, kde &
, ims, ime, jms, jme, kms, kme &
, ips, ipe, jps, jpe, kps, kpe &
, imsx, imex, jmsx, jmex, kmsx, kmex &
, ipsx, ipex, jpsx, jpex, kpsx, kpex &
, imsy, imey, jmsy, jmey, kmsy, kmey &
, ipsy, ipey, jpsy, jpey, kpsy, kpey &
, k_start , k_end &
)
END IF rk_step_is_one
BENCH_START(g_rk_tend_tim)
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
CALL wrf_debug ( 200 , ' call g_rk_tendency' )
CALL g_rk_tendency ( config_flags, rk_step, &
grid%ru_tend, grid%g_ru_tend, grid%rv_tend, grid%g_rv_tend, &
rw_tend, g_rw_tend, ph_tend, g_ph_tend, t_tend, g_t_tend, &
ru_tendf, g_ru_tendf, rv_tendf, g_rv_tendf, &
rw_tendf, g_rw_tendf, ph_tendf, g_ph_tendf, t_tendf, g_t_tendf, &
mu_tend, g_mu_tend, &
grid%u_save, grid%g_u_save, grid%v_save, grid%g_v_save, &
w_save, g_w_save, ph_save, g_ph_save, &
grid%t_save, grid%g_t_save, mu_save, g_mu_save, &
grid%rthften, grid%g_rthften, &
grid%ru, grid%g_ru, grid%rv, grid%g_rv, grid%rw, grid%g_rw, grid%ww, grid%g_ww, &
grid%u_2, grid%g_u_2, grid%v_2, grid%g_v_2, grid%w_2, grid%g_w_2, &
grid%t_2, grid%g_t_2, grid%ph_2, grid%g_ph_2, &
grid%u_1, grid%g_u_1, grid%v_1, grid%g_v_1, grid%w_1, grid%g_w_1, &
grid%t_1, grid%g_t_1, grid%ph_1, grid%g_ph_1, &
grid%h_diabatic, grid%g_h_diabatic, grid%phb, grid%t_init, &
grid%mu_2, grid%g_mu_2, grid%mut, grid%g_mut, grid%muu, grid%g_muu, &
grid%muv, grid%g_muv, grid%mub, &
grid%al, grid%g_al, grid%alt, grid%g_alt, grid%p, grid%g_p, grid%pb, &
grid%php, grid%g_php, cqu, g_cqu, cqv, g_cqv, cqw, g_cqw, &
grid%u_base, grid%v_base, grid%t_base, grid%qv_base, grid%z_base, &
grid%msfux,grid%msfuy, grid%msfvx, grid%msfvx_inv, &
grid%msfvy, grid%msftx,grid%msfty, grid%clat, grid%f, grid%e, grid%sina, grid%cosa, &
grid%fnm, grid%fnp, grid%rdn, grid%rdnw, &
grid%dt, grid%rdx, grid%rdy, grid%khdif, grid%kvdif, &
grid%xkmh,grid%g_xkmh, grid%xkhh,grid%g_xkhh, &
grid%diff_6th_opt, grid%diff_6th_factor, &
config_flags%momentum_adv_opt, &
grid%dampcoef,grid%zdamp,config_flags%damp_opt,config_flags%rad_nudge, &
grid%cf1, grid%cf2, grid%cf3, grid%cfn, grid%cfn1, num_3d_m, &
config_flags%non_hydrostatic, config_flags%top_lid, &
grid%u_frame, grid%v_frame, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end, &
max_vert_cfl_tmp(ij), max_horiz_cfl_tmp(ij) )
END DO
!$OMP END PARALLEL DO
BENCH_END(g_rk_tend_tim)
IF (config_flags%use_adaptive_time_step) THEN
DO ij = 1 , grid%num_tiles
IF (max_horiz_cfl_tmp(ij) .GT. grid%max_horiz_cfl) THEN
grid%max_horiz_cfl = max_horiz_cfl_tmp(ij)
ENDIF
IF (max_vert_cfl_tmp(ij) .GT. grid%max_vert_cfl) THEN
grid%max_vert_cfl = max_vert_cfl_tmp(ij)
ENDIF
END DO
IF (grid%max_horiz_cfl .GT. grid%max_cfl_val) THEN
grid%max_cfl_val = grid%max_horiz_cfl
ENDIF
IF (grid%max_vert_cfl .GT. grid%max_cfl_val) THEN
grid%max_cfl_val = grid%max_vert_cfl
ENDIF
ENDIF
BENCH_START(g_relax_bdy_dry_tim)
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
IF( (config_flags%specified .or. config_flags%nested) .and. rk_step == 1 ) THEN
CALL g_relax_bdy_dry ( config_flags, &
grid%u_save, grid%g_u_save, grid%v_save, grid%g_v_save, &
ph_save, g_ph_save, grid%t_save, grid%g_t_save, &
w_save, g_w_save, mu_tend, g_mu_tend, &
grid%ru, grid%g_ru, grid%rv, grid%g_rv, &
grid%ph_2, grid%g_ph_2, grid%t_2, grid%g_t_2, &
grid%w_2, grid%g_w_2, grid%mu_2, grid%g_mu_2, grid%mut, grid%g_mut, &
grid%u_bxs, grid%g_u_bxs, grid%u_bxe, grid%g_u_bxe, &
grid%u_bys, grid%g_u_bys, grid%u_bye, grid%g_u_bye, &
grid%v_bxs, grid%g_v_bxs, grid%v_bxe, grid%g_v_bxe, &
grid%v_bys, grid%g_v_bys, grid%v_bye, grid%g_v_bye, &
grid%ph_bxs, grid%g_ph_bxs, grid%ph_bxe, grid%g_ph_bxe, &
grid%ph_bys, grid%g_ph_bys, grid%ph_bye, grid%g_ph_bye, &
grid%t_bxs, grid%g_t_bxs, grid%t_bxe, grid%g_t_bxe, &
grid%t_bys, grid%g_t_bys, grid%t_bye, grid%g_t_bye, &
grid%w_bxs, grid%g_w_bxs, grid%w_bxe, grid%g_w_bxe, &
grid%w_bys, grid%g_w_bys, grid%w_bye, grid%g_w_bye, &
grid%mu_bxs, grid%g_mu_bxs, grid%mu_bxe, grid%g_mu_bxe, &
grid%mu_bys, grid%g_mu_bys, grid%mu_bye, grid%g_mu_bye, &
grid%u_btxs, grid%g_u_btxs, grid%u_btxe, grid%g_u_btxe, &
grid%u_btys, grid%g_u_btys, grid%u_btye, grid%g_u_btye, &
grid%v_btxs, grid%g_v_btxs, grid%v_btxe, grid%g_v_btxe, &
grid%v_btys, grid%g_v_btys, grid%v_btye, grid%g_v_btye, &
grid%ph_btxs, grid%g_ph_btxs, grid%ph_btxe, grid%g_ph_btxe, &
grid%ph_btys, grid%g_ph_btys, grid%ph_btye, grid%g_ph_btye, &
grid%t_btxs, grid%g_t_btxs, grid%t_btxe, grid%g_t_btxe, &
grid%t_btys, grid%g_t_btys, grid%t_btye, grid%g_t_btye, &
grid%w_btxs, grid%g_w_btxs, grid%w_btxe, grid%g_w_btxe, &
grid%w_btys, grid%g_w_btys, grid%w_btye, grid%g_w_btye, &
grid%mu_btxs, grid%g_mu_btxs, grid%mu_btxe, grid%g_mu_btxe, &
grid%mu_btys, grid%g_mu_btys, grid%mu_btye, grid%g_mu_btye, &
config_flags%spec_bdy_width, grid%spec_zone, grid%relax_zone, &
grid%dtbc, grid%fcx, grid%gcx, &
ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
ips,ipe, jps,jpe, kps,kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
ENDIF
CALL g_rk_addtend_dry ( grid%ru_tend, grid%g_ru_tend, &
grid%rv_tend, grid%g_rv_tend, &
rw_tend, g_rw_tend, ph_tend, g_ph_tend, t_tend, g_t_tend, &
ru_tendf, g_ru_tendf, rv_tendf, g_rv_tendf, rw_tendf, g_rw_tendf, &
ph_tendf, g_ph_tendf, t_tendf, g_t_tendf, &
grid%u_save, grid%g_u_save, grid%v_save, grid%g_v_save, &
w_save, g_w_save, ph_save, g_ph_save, grid%t_save, grid%g_t_save, &
mu_tend, g_mu_tend, mu_tendf, g_mu_tendf, rk_step, &
grid%h_diabatic, grid%g_h_diabatic, grid%mut, grid%g_mut, &
grid%msftx, grid%msfty, grid%msfux, grid%msfuy, &
grid%msfvx, grid%msfvx_inv, grid%msfvy, &
ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
ips,ipe, jps,jpe, kps,kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
IF( config_flags%specified .or. config_flags%nested ) THEN
CALL g_spec_bdy_dry ( config_flags, &
grid%ru_tend, grid%g_ru_tend, grid%rv_tend, grid%g_rv_tend, &
ph_tend, g_ph_tend, t_tend, g_t_tend, &
rw_tend, g_rw_tend, mu_tend, g_mu_tend, &
grid%u_bxs, grid%g_u_bxs, grid%u_bxe, grid%g_u_bxe, &
grid%u_bys, grid%g_u_bys, grid%u_bye, grid%g_u_bye, &
grid%v_bxs, grid%g_v_bxs, grid%v_bxe, grid%g_v_bxe, &
grid%v_bys, grid%g_v_bys, grid%v_bye, grid%g_v_bye, &
grid%ph_bxs, grid%g_ph_bxs, grid%ph_bxe, grid%g_ph_bxe, &
grid%ph_bys, grid%g_ph_bys, grid%ph_bye, grid%g_ph_bye, &
grid%t_bxs, grid%g_t_bxs, grid%t_bxe, grid%g_t_bxe, &
grid%t_bys, grid%g_t_bys, grid%t_bye, grid%g_t_bye, &
grid%w_bxs, grid%g_w_bxs, grid%w_bxe, grid%g_w_bxe, &
grid%w_bys, grid%g_w_bys, grid%w_bye, grid%g_w_bye, &
grid%mu_bxs, grid%g_mu_bxs, grid%mu_bxe, grid%g_mu_bxe, &
grid%mu_bys, grid%g_mu_bys, grid%mu_bye, grid%g_mu_bye, &
grid%u_btxs, grid%g_u_btxs, grid%u_btxe, grid%g_u_btxe, &
grid%u_btys, grid%g_u_btys, grid%u_btye, grid%g_u_btye, &
grid%v_btxs, grid%g_v_btxs, grid%v_btxe, grid%g_v_btxe, &
grid%v_btys, grid%g_v_btys, grid%v_btye, grid%g_v_btye, &
grid%ph_btxs, grid%g_ph_btxs, grid%ph_btxe, grid%g_ph_btxe, &
grid%ph_btys, grid%g_ph_btys, grid%ph_btye, grid%g_ph_btye, &
grid%t_btxs, grid%g_t_btxs, grid%t_btxe, grid%g_t_btxe, &
grid%t_btys, grid%g_t_btys, grid%t_btye, grid%g_t_btye, &
grid%w_btxs, grid%g_w_btxs, grid%w_btxe, grid%g_w_btxe, &
grid%w_btys, grid%g_w_btys, grid%w_btye, grid%g_w_btye, &
grid%mu_btxs, grid%g_mu_btxs, grid%mu_btxe, grid%g_mu_btxe, &
grid%mu_btys, grid%g_mu_btys, grid%mu_btye, grid%g_mu_btye, &
config_flags%spec_bdy_width, grid%spec_zone, &
ids,ide, jds,jde, kds,kde, & ! domain dims
ims,ime, jms,jme, kms,kme, & ! memory dims
ips,ipe, jps,jpe, kps,kpe, & ! patch dims
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
ENDIF
END DO
!$OMP END PARALLEL DO
BENCH_END(g_relax_bdy_dry_tim)
!<DESCRIPTION>
!<pre>
! (3) Small (acoustic,sound) steps.
!
! Several acoustic steps are taken each RK pass. A small step
! sequence begins with calculating perturbation variables
! and coupling them to the column dry-air-mass mu
! (call to small_step_prep). This is followed by computing
! coefficients for the vertically implicit part of the
! small timestep (call to calc_coef_w).
!
! The small steps are taken
! in the named loop "small_steps:". In the small_steps loop, first
! the horizontal momentum (u and v) are advanced (call to advance_uv),
! next mu and theta are advanced (call to advance_mu_t) followed by
! advancing w and the geopotential (call to advance_w). Diagnostic
! values for pressure and inverse density are updated at the end of
! each small_step.
!
! The small-step section ends with the change of the perturbation variables
! back to full variables (call to small_step_finish).
!</pre>
!</DESCRIPTION>
BENCH_START(g_small_step_prep_tim)
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
! Calculate coefficients for the vertically implicit acoustic/gravity wave
! integration. We only need calculate these for the first pass through -
! the predictor step. They are reused as is for the corrector step.
! For third-order RK, we need to recompute these after the first
! predictor because we may have changed the small timestep -> grid%dts.
CALL wrf_debug ( 200 , ' call g_small_step_prep ' )
CALL g_small_step_prep( grid%u_1,grid%g_u_1,grid%u_2,grid%g_u_2, &
grid%v_1,grid%g_v_1,grid%v_2,grid%g_v_2, &
grid%w_1,grid%g_w_1,grid%w_2,grid%g_w_2, &
grid%t_1,grid%g_t_1,grid%t_2,grid%g_t_2, &
grid%ph_1,grid%g_ph_1,grid%ph_2,grid%g_ph_2, &
grid%mub, grid%mu_1,grid%g_mu_1, grid%mu_2,grid%g_mu_2, &
grid%muu,grid%g_muu, grid%muus,grid%g_muus, &
grid%muv,grid%g_muv, grid%muvs,grid%g_muvs, &
grid%mut,grid%g_mut, grid%muts,grid%g_muts, grid%mudf,grid%g_mudf, &
grid%u_save,grid%g_u_save, grid%v_save,grid%g_v_save, w_save,g_w_save, &
grid%t_save,grid%g_t_save, ph_save,g_ph_save, mu_save,g_mu_save, &
grid%ww,grid%g_ww, ww1,g_ww1, &
c2a,g_c2a, grid%pb, grid%p,grid%g_p, grid%alt,grid%g_alt,&
grid%msfux,grid%msfuy, grid%msfvx, grid%msfvx_inv, &
grid%msfvy, grid%msftx,grid%msfty, &
grid%rdx, grid%rdy, rk_step, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
CALL g_calc_p_rho( grid%al,grid%g_al, grid%p,grid%g_p, grid%ph_2,grid%g_ph_2, &
grid%alt,grid%g_alt, grid%t_2,grid%g_t_2, &
grid%t_save,grid%g_t_save, c2a,g_c2a, pm1,g_pm1, &
grid%mu_2,grid%g_mu_2, grid%muts,grid%g_muts, grid%znu, t0, &
grid%rdnw, grid%dnw, grid%smdiv, &
config_flags%non_hydrostatic, 0, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
IF (config_flags%non_hydrostatic) THEN
CALL g_calc_coef_w( a,g_a,alpha,g_alpha,gamma,g_gamma, &
grid%mut,grid%g_mut, cqw,g_cqw, &
grid%rdn, grid%rdnw, c2a,g_c2a, &
dts_rk, g, grid%epssm, &
config_flags%top_lid, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
ENDIF
ENDDO
!$OMP END PARALLEL DO
BENCH_END(g_small_step_prep_tim)
#ifdef DM_PARALLEL
!-----------------------------------------------------------------------
! Stencils for patch communications (WCS, 29 June 2001)
! Note: the small size of this halo exchange reflects the
! fact that we are carrying the uncoupled variables
! as state variables in the mass coordinate model, as
! opposed to the coupled variables as in the height
! coordinate model.
!
! * * * * *
! * * * * * * * * *
! * + * * + * * * + * *
! * * * * * * * * *
! * * * * *
!
! 3D variables - note staggering! ph_2(Z), u_save(X), v_save(Y)
!
! ph_2 x
! al x
! p x
! t_1 x
! t_save x
! u_save x
! v_save x
!
! the following are 2D (xy) variables
!
! mu_1 x
! mu_2 x
! mudf x
! php x
! alt x
! pb x
!--------------------------------------------------------------
# include "HALO_EM_B_TL.inc"
# include "PERIOD_BDY_EM_B.inc"
#endif
BENCH_START(g_set_phys_bc2_tim)
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
CALL g_set_physical_bc3d( grid%ru_tend,grid%g_ru_tend, 'u', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
CALL g_set_physical_bc3d( grid%rv_tend,grid%g_rv_tend, 'v', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
CALL g_set_physical_bc3d( grid%ph_2,grid%g_ph_2, 'w', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
CALL g_set_physical_bc3d( grid%al,grid%g_al, 'p', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
CALL g_set_physical_bc3d( grid%p,grid%g_p, 'p', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
CALL g_set_physical_bc3d( grid%t_1,grid%g_t_1, 'p', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
CALL g_set_physical_bc3d( grid%t_save,grid%g_t_save, 't', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
CALL g_set_physical_bc2d( grid%mu_1,grid%g_mu_1, 't', config_flags, &
ids, ide, jds, jde, &
ims, ime, jms, jme, &
ips, ipe, jps, jpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij) )
CALL g_set_physical_bc2d( grid%mu_2,grid%g_mu_2, 't', config_flags, &
ids, ide, jds, jde, &
ims, ime, jms, jme, &
ips, ipe, jps, jpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij) )
CALL g_set_physical_bc2d( grid%mudf,grid%g_mudf, 't', config_flags, &
ids, ide, jds, jde, &
ims, ime, jms, jme, &
ips, ipe, jps, jpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij) )
END DO
!$OMP END PARALLEL DO
BENCH_END(g_set_phys_bc2_tim)
small_steps : DO iteration = 1 , number_of_small_timesteps
! Boundary condition time (or communication time).
#ifdef DM_PARALLEL
# include "PERIOD_BDY_EM_B.inc"
#endif
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
BENCH_START(g_advance_uv_tim)
CALL g_advance_uv( grid%u_2,grid%g_u_2, grid%ru_tend,grid%g_ru_tend, &
grid%v_2,grid%g_v_2, grid%rv_tend,grid%g_rv_tend, &
grid%p,grid%g_p, grid%pb, &
grid%ph_2,grid%g_ph_2, grid%php,grid%g_php, &
grid%alt,grid%g_alt, grid%al,grid%g_al, &
grid%mu_2,grid%g_mu_2, &
grid%muu,grid%g_muu, cqu,g_cqu, grid%muv,grid%g_muv, cqv,g_cqv, &
grid%mudf,grid%g_mudf, &
grid%msfux, grid%msfuy, grid%msfvx, &
grid%msfvx_inv, grid%msfvy, &
grid%rdx, grid%rdy, dts_rk, &
grid%cf1, grid%cf2, grid%cf3, grid%fnm, grid%fnp, &
grid%emdiv, &
grid%rdnw, config_flags,grid%spec_zone, &
config_flags%non_hydrostatic, config_flags%top_lid, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
BENCH_END(g_advance_uv_tim)
END DO
!$OMP END PARALLEL DO
!-----------------------------------------------------------
! acoustic integration polar filter for smallstep u, v
!-----------------------------------------------------------
IF (config_flags%polar) THEN
CALL pxft ( grid=grid &
,lineno=__LINE__ &
,flag_uv = 1 &
,flag_rurv = 0 &
,flag_wph = 0 &
,flag_ww = 0 &
,flag_t = 0 &
,flag_mu = 0 &
,flag_mut = 0 &
,flag_moist = 0 &
,flag_chem = 0 &
,flag_tracer = 0 &
,flag_scalar = 0 &
,actual_distance_average = .FALSE. &
,pos_def = .FALSE. &
,swap_pole_with_next_j = .FALSE. &
,moist=moist,chem=chem,tracer=tracer,scalar=scalar &
,fft_filter_lat = config_flags%fft_filter_lat &
,dclat = dclat &
,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde &
,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme &
,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe &
,imsx=imsx,imex=imex,jmsx=jmsx,jmex=jmex,kmsx=kmsx,kmex=kmex &
,ipsx=ipsx,ipex=ipex,jpsx=jmsx,jpex=jpex,kpsx=kpsx,kpex=kpex )
END IF
!-----------------------------------------------------------
! end acoustic integration polar filter for smallstep u, v
!-----------------------------------------------------------
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
BENCH_START(g_spec_bdy_uv_tim)
IF( config_flags%specified .or. config_flags%nested ) THEN
CALL g_spec_bdyupdate ( grid%u_2, grid%g_u_2, &
grid%ru_tend, grid%g_ru_tend, dts_rk, &
'u' , config_flags, &
grid%spec_zone, &
ids,ide, jds,jde, kds,kde, & ! domain dims
ims,ime, jms,jme, kms,kme, & ! memory dims
ips,ipe, jps,jpe, kps,kpe, & ! patch dims
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
CALL g_spec_bdyupdate ( grid%v_2, grid%g_v_2, &
grid%rv_tend, grid%g_rv_tend, dts_rk, &
'v' , config_flags, &
grid%spec_zone, &
ids,ide, jds,jde, kds,kde, & ! domain dims
ims,ime, jms,jme, kms,kme, & ! memory dims
ips,ipe, jps,jpe, kps,kpe, & ! patch dims
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
ENDIF
BENCH_END(g_spec_bdy_uv_tim)
END DO
!$OMP END PARALLEL DO
#ifdef DM_PARALLEL
!
! Stencils for patch communications (WCS, 29 June 2001)
!
! * *
! * + * * + * +
! * *
!
! u_2 x
! v_2 x
!
# include "HALO_EM_C_TL.inc"
#endif
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
! advance the mass in the column, theta, and calculate ww
BENCH_START(g_advance_mu_t_tim)
CALL g_advance_mu_t( grid%ww,grid%g_ww, ww1,g_ww1, &
grid%u_2,grid%g_u_2, grid%u_save,grid%g_u_save, &
grid%v_2,grid%g_v_2, grid%v_save,grid%g_v_save, &
grid%mu_2,grid%g_mu_2, grid%mut,grid%g_mut, &
muave,g_muave, grid%muts,grid%g_muts, &
grid%muu,grid%g_muu, grid%muv,grid%g_muv, grid%mudf,grid%g_mudf, &
grid%ru_m,grid%g_ru_m, grid%rv_m,grid%g_rv_m, grid%ww_m,grid%g_ww_m, &
grid%t_2,grid%g_t_2, grid%t_save,grid%g_t_save, &
t_2save,g_t_2save, t_tend,g_t_tend, &
mu_tend,g_mu_tend, &
grid%rdx, grid%rdy, dts_rk, grid%epssm, &
grid%dnw, grid%fnm, grid%fnp, grid%rdnw, &
grid%msfux,grid%msfuy, grid%msfvx, grid%msfvx_inv, &
grid%msfvy, grid%msftx,grid%msfty, &
iteration, config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
BENCH_END(g_advance_mu_t_tim)
ENDDO
!$OMP END PARALLEL DO
!-----------------------------------------------------------
! acoustic integration polar filter for smallstep mu, t
!-----------------------------------------------------------
IF ( (config_flags%polar) ) THEN
CALL pxft ( grid=grid &
,lineno=__LINE__ &
,flag_uv = 0 &
,flag_rurv = 0 &
,flag_wph = 0 &
,flag_ww = 0 &
,flag_t = 1 &
,flag_mu = 1 &
,flag_mut = 0 &
,flag_moist = 0 &
,flag_chem = 0 &
,flag_tracer = 0 &
,flag_scalar = 0 &
,actual_distance_average = .FALSE. &
,pos_def = .FALSE. &
,swap_pole_with_next_j = .FALSE. &
,moist=moist,chem=chem,tracer=tracer,scalar=scalar &
,fft_filter_lat = config_flags%fft_filter_lat &
,dclat = dclat &
,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde &
,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme &
,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe &
,imsx=imsx,imex=imex,jmsx=jmsx,jmex=jmex,kmsx=kmsx,kmex=kmex &
,ipsx=ipsx,ipex=ipex,jpsx=jmsx,jpex=jpex,kpsx=kpsx,kpex=kpex )
grid%muts = grid%mut + grid%mu_2 ! reset muts using filtered mu_2
END IF
!-----------------------------------------------------------
! end acoustic integration polar filter for smallstep mu, t
!-----------------------------------------------------------
BENCH_START(g_spec_bdy_t_tim)
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
IF( config_flags%specified .or. config_flags%nested ) THEN
CALL g_spec_bdyupdate ( grid%t_2, grid%g_t_2, &
t_tend, g_t_tend, dts_rk, &
't' , config_flags, &
grid%spec_zone, &
ids,ide, jds,jde, kds,kde, & ! domain dims
ims,ime, jms,jme, kms,kme, & ! memory dims
ips,ipe, jps,jpe, kps,kpe, & ! patch dims
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
CALL g_spec_bdyupdate ( grid%mu_2, grid%g_mu_2, &
mu_tend, g_mu_tend, dts_rk, &
'm' , config_flags, &
grid%spec_zone, &
ids,ide, jds,jde, 1 ,1 , &
ims,ime, jms,jme, 1 ,1 , &
ips,ipe, jps,jpe, 1 ,1 , &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
1, 1 )
CALL g_spec_bdyupdate ( grid%muts, grid%g_muts, mu_tend, g_mu_tend, dts_rk, &
'm' , config_flags, &
grid%spec_zone, &
ids,ide, jds,jde, 1 ,1 , & ! domain dims
ims,ime, jms,jme, 1 ,1 , & ! memory dims
ips,ipe, jps,jpe, 1 ,1 , & ! patch dims
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
1, 1 )
ENDIF
BENCH_END(g_spec_bdy_t_tim)
! small (acoustic) step for the vertical momentum,
! density and coupled potential temperature.
BENCH_START(g_advance_w_tim)
IF ( config_flags%non_hydrostatic ) THEN
CALL g_advance_w( grid%w_2,grid%g_w_2, rw_tend,g_rw_tend, grid%ww,grid%g_ww, w_save,g_w_save, &
grid%u_2,grid%g_u_2, grid%v_2,grid%g_v_2, &
grid%mu_2,grid%mut,grid%g_mut, &
muave,g_muave, grid%muts,grid%g_muts, &
t_2save,g_t_2save, grid%t_2,grid%g_t_2, grid%t_save,grid%g_t_save, &
grid%ph_2,grid%g_ph_2, ph_save,g_ph_save, grid%phb, ph_tend,g_ph_tend, &
grid%ht, c2a,g_c2a, cqw,g_cqw, grid%alt,grid%g_alt, grid%alb, &
a,g_a, alpha,g_alpha, gamma,g_gamma, &
grid%rdx, grid%rdy, dts_rk, t0, grid%epssm, &
grid%dnw, grid%fnm, grid%fnp, grid%rdnw, &
grid%rdn, grid%cf1, grid%cf2, grid%cf3, &
grid%msftx, grid%msfty, &
config_flags, config_flags%top_lid, &
ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
ENDIF
BENCH_END(g_advance_w_tim)
ENDDO
!$OMP END PARALLEL DO
!-----------------------------------------------------------
! acoustic integration polar filter for smallstep w, geopotential
!-----------------------------------------------------------
IF ( (config_flags%polar) .AND. (config_flags%non_hydrostatic) ) THEN
CALL pxft ( grid=grid &
,lineno=__LINE__ &
,flag_uv = 0 &
,flag_rurv = 0 &
,flag_wph = 1 &
,flag_ww = 0 &
,flag_t = 0 &
,flag_mu = 0 &
,flag_mut = 0 &
,flag_moist = 0 &
,flag_chem = 0 &
,flag_tracer = 0 &
,flag_scalar = 0 &
,actual_distance_average = .FALSE. &
,pos_def = .FALSE. &
,swap_pole_with_next_j = .FALSE. &
,moist=moist,chem=chem,tracer=tracer,scalar=scalar &
,fft_filter_lat = config_flags%fft_filter_lat &
,dclat = dclat &
,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde &
,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme &
,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe &
,imsx=imsx,imex=imex,jmsx=jmsx,jmex=jmex,kmsx=kmsx,kmex=kmex &
,ipsx=ipsx,ipex=ipex,jpsx=jmsx,jpex=jpex,kpsx=kpsx,kpex=kpex )
END IF
!-----------------------------------------------------------
! end acoustic integration polar filter for smallstep w, geopotential
!-----------------------------------------------------------
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
BENCH_START(g_sumflux_tim)
CALL g_sumflux ( grid%u_2,grid%g_u_2, grid%v_2,grid%g_v_2, grid%ww,grid%g_ww, &
grid%u_save, grid%g_u_save, grid%v_save, grid%g_v_save, ww1, g_ww1, &
grid%muu, grid%g_muu, grid%muv, grid%g_muv, &
grid%ru_m, grid%g_ru_m, grid%rv_m, grid%g_rv_m, grid%ww_m, grid%g_ww_m, &
grid%epssm, &
grid%msfux, grid% msfuy, grid%msfvx, &
grid%msfvx_inv, grid%msfvy, &
iteration, number_of_small_timesteps, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
BENCH_END(g_sumflux_tim)
IF( config_flags%specified .or. config_flags%nested ) THEN
BENCH_START(g_spec_bdynhyd_tim)
IF (config_flags%non_hydrostatic) THEN
CALL g_spec_bdyupdate_ph ( ph_save, g_ph_save, grid%ph_2, grid%g_ph_2, &
ph_tend, g_ph_tend, &
mu_tend, g_mu_tend, grid%muts, grid%g_muts, dts_rk, &
'h' , config_flags, &
grid%spec_zone, &
ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
ips,ipe, jps,jpe, kps,kpe, &
grid%i_start(ij), grid%i_end(ij),&
grid%j_start(ij), grid%j_end(ij),&
k_start, k_end )
IF( config_flags%specified ) THEN
CALL g_zero_grad_bdy ( grid%w_2, grid%g_w_2, &
'w' , config_flags, &
grid%spec_zone, &
ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
ips,ipe, jps,jpe, kps,kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
ELSE
CALL g_spec_bdyupdate ( grid%w_2, grid%g_w_2, &
rw_tend, g_rw_tend, dts_rk, &
'h' , config_flags, &
grid%spec_zone, &
ids,ide, jds,jde, kds,kde, & ! domain dims
ims,ime, jms,jme, kms,kme, & ! memory dims
ips,ipe, jps,jpe, kps,kpe, & ! patch dims
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
ENDIF
ENDIF
BENCH_END(g_spec_bdynhyd_tim)
ENDIF
BENCH_START(g_cald_p_rho_tim)
CALL g_calc_p_rho( grid%al, grid%g_al, grid%p, grid%g_p, grid%ph_2, grid%g_ph_2, &
grid%alt, grid%g_alt, grid%t_2, grid%g_t_2, grid%t_save, grid%g_t_save, &
c2a, g_c2a, pm1, g_pm1, &
grid%mu_2, grid%g_mu_2, grid%muts, grid%g_muts, grid%znu, t0, &
grid%rdnw, grid%dnw, grid%smdiv, &
config_flags%non_hydrostatic, iteration, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
BENCH_END(g_cald_p_rho_tim)
ENDDO
!$OMP END PARALLEL DO
#ifdef DM_PARALLEL
!
! Stencils for patch communications (WCS, 29 June 2001)
!
! * *
! * + * * + * +
! * *
!
! ph_2 x
! al x
! p x
!
! 2D variables (x,y)
!
! mu_2 x
! muts x
! mudf x
# include "HALO_EM_C2_TL.inc"
# include "PERIOD_BDY_EM_B3.inc"
#endif
BENCH_START(g_phys_bc_tim)
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
! boundary condition set for next small timestep
CALL g_set_physical_bc3d( grid%ph_2,grid%g_ph_2, 'w', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
CALL g_set_physical_bc3d( grid%al,grid%g_al, 'p', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
CALL g_set_physical_bc3d( grid%p,grid%g_p, 'p', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
CALL g_set_physical_bc2d( grid%muts,grid%g_muts, 't', config_flags, &
ids, ide, jds, jde, &
ims, ime, jms, jme, &
ips, ipe, jps, jpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij) )
CALL g_set_physical_bc2d( grid%mu_2,grid%g_mu_2, 't', config_flags, &
ids, ide, jds, jde, &
ims, ime, jms, jme, &
ips, ipe, jps, jpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij) )
CALL g_set_physical_bc2d( grid%mudf,grid%g_mudf, 't', config_flags, &
ids, ide, jds, jde, &
ims, ime, jms, jme, &
ips, ipe, jps, jpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij) )
END DO
!$OMP END PARALLEL DO
BENCH_END(g_phys_bc_tim)
END DO small_steps
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
CALL wrf_debug ( 200 , ' call g_rk_small_finish' )
! change time-perturbation variables back to
! full perturbation variables.
! first get updated mu at u and v points
BENCH_START(g_calc_mu_uv_tim)
CALL g_calc_mu_uv_1 ( config_flags, &
grid%muts, grid%g_muts, &
grid%muus, grid%g_muus, &
grid%muvs, grid%g_muvs, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
BENCH_END(g_calc_mu_uv_tim)
BENCH_START(g_small_step_finish_tim)
CALL g_small_step_finish( grid%u_2, grid%g_u_2, grid%u_1, &
grid%v_2, grid%g_v_2, grid%v_1, &
grid%w_2, grid%g_w_2, grid%w_1, &
grid%t_2, grid%g_t_2, grid%t_1, &
grid%ph_2, grid%g_ph_2, grid%ph_1, &
grid%ww, grid%g_ww, ww1, g_ww1, &
grid%mu_2, grid%g_mu_2, grid%mu_1, &
grid%mut, grid%g_mut, grid%muts, grid%g_muts, &
grid%muu, grid%g_muu, grid%muus, grid%g_muus, &
grid%muv, grid%g_muv, grid%muvs, grid%g_muvs, &
grid%u_save, grid%g_u_save, grid%v_save, grid%g_v_save, w_save, g_w_save, &
grid%t_save, grid%g_t_save, ph_save, g_ph_save, mu_save, g_mu_save, &
grid%msfux,grid%msfuy,grid%msfvx,grid%msfvy,grid%msftx,grid%msfty, &
grid%h_diabatic, grid%g_h_diabatic, &
number_of_small_timesteps,dts_rk, &
rk_step, rk_order, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
! call to set ru_m, rv_m and ww_m b.c's for PD advection
IF (rk_step == rk_order) THEN
CALL g_set_physical_bc3d( grid%ru_m,grid%g_ru_m, 'u', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
CALL g_set_physical_bc3d( grid%rv_m,grid%g_rv_m, 'v', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
CALL g_set_physical_bc3d( grid%ww_m,grid%g_ww_m, 'w', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
CALL g_set_physical_bc2d( grid%mut,grid%g_mut, 't', config_flags, &
ids, ide, jds, jde, &
ims, ime, jms, jme, &
ips, ipe, jps, jpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij) )
CALL g_set_physical_bc2d( grid%muts,grid%g_muts, 't', config_flags, &
ids, ide, jds, jde, &
ims, ime, jms, jme, &
ips, ipe, jps, jpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij) )
END IF
BENCH_END(g_small_step_finish_tim)
END DO
!$OMP END PARALLEL DO
!-----------------------------------------------------------
! polar filter for full dynamics variables and time-averaged mass fluxes
!-----------------------------------------------------------
IF (config_flags%polar) THEN
CALL pxft ( grid=grid &
,lineno=__LINE__ &
,flag_uv = 1 &
,flag_rurv = 1 &
,flag_wph = 1 &
,flag_ww = 1 &
,flag_t = 1 &
,flag_mu = 1 &
,flag_mut = 1 &
,flag_moist = 0 &
,flag_chem = 0 &
,flag_tracer = 0 &
,flag_scalar = 0 &
,actual_distance_average = .FALSE. &
,pos_def = .FALSE. &
,swap_pole_with_next_j = .FALSE. &
,moist=moist,chem=chem,tracer=tracer,scalar=scalar &
,fft_filter_lat = config_flags%fft_filter_lat &
,dclat = dclat &
,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde &
,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme &
,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe &
,imsx=imsx,imex=imex,jmsx=jmsx,jmex=jmex,kmsx=kmsx,kmex=kmex &
,ipsx=ipsx,ipex=ipex,jpsx=jmsx,jpex=jpex,kpsx=kpsx,kpex=kpex )
END IF
!-----------------------------------------------------------
! end polar filter for full dynamics variables and time-averaged mass fluxes
!-----------------------------------------------------------
!-----------------------------------------------------------------------
! add in physics tendency first if positive definite advection is used.
! pd advection applies advective flux limiter on last runge-kutta step
!-----------------------------------------------------------------------
! first moisture
IF ((config_flags%moist_adv_opt /= ORIGINAL .and. config_flags%moist_adv_opt /= WENO_SCALAR) .and. (rk_step == rk_order)) THEN
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
CALL wrf_debug ( 200 , ' call g_rk_update_scalar_pd moist ' )
DO im = PARAM_FIRST_SCALAR, num_3d_m
CALL g_rk_update_scalar_pd( im, im, &
moist_old(ims,kms,jms,im),g_moist_old(ims,kms,jms,im), &
moist_tend(ims,kms,jms,im),g_moist_tend(ims,kms,jms,im), &
grid%mu_1,grid%g_mu_1, grid%mu_1,grid%g_mu_1, grid%mub, &
rk_step, dt_rk, grid%spec_zone, &
config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
ENDDO
END DO
!$OMP END PARALLEL DO
!---------------------- positive definite bc call
#ifdef DM_PARALLEL
IF (config_flags%moist_adv_opt /= ORIGINAL .and. config_flags%moist_adv_opt /= WENO_SCALAR) THEN
IF ( config_flags%h_sca_adv_order <= 4 ) THEN
# include "HALO_EM_MOIST_OLD_E_5_TL.inc"
ELSE IF ( config_flags%h_sca_adv_order <= 6 ) THEN
# include "HALO_EM_MOIST_OLD_E_7_TL.inc"
ELSE
WRITE(wrf_err_message,*)'solve_em_tl: invalid h_sca_adv_order = ',config_flags%h_sca_adv_order
CALL wrf_error_fatal(TRIM(wrf_err_message))
ENDIF
ENDIF
#endif
#ifdef DM_PARALLEL
# include "PERIOD_BDY_EM_MOIST_OLD.inc"
#endif
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
IF (num_3d_m >= PARAM_FIRST_SCALAR) THEN
DO im = PARAM_FIRST_SCALAR , num_3d_m
CALL g_set_physical_bc3d( moist_old(ims,kms,jms,im),g_moist_old(ims,kms,jms,im), 'p', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
END DO
ENDIF
END DO
!$OMP END PARALLEL DO
END IF ! end if for moist_adv_opt
! scalars
IF ((config_flags%scalar_adv_opt /= ORIGINAL .and. config_flags%scalar_adv_opt /= WENO_SCALAR) .and. (rk_step == rk_order)) THEN
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
CALL wrf_debug ( 200 , ' call g_rk_update_scalar_pd scalar ' )
DO im = PARAM_FIRST_SCALAR, num_3d_s
CALL g_rk_update_scalar_pd( im, im, &
scalar_old(ims,kms,jms,im),g_scalar_old(ims,kms,jms,im), &
scalar_tend(ims,kms,jms,im),g_scalar_tend(ims,kms,jms,im),&
grid%mu_1,grid%g_mu_1, grid%mu_1,grid%g_mu_1, grid%mub, &
rk_step, dt_rk, grid%spec_zone, &
config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
ENDDO
ENDDO
!$OMP END PARALLEL DO
!---------------------- positive definite bc call
#ifdef DM_PARALLEL
IF (config_flags%scalar_adv_opt /= ORIGINAL .and. config_flags%scalar_adv_opt /= WENO_SCALAR) THEN
#ifndef RSL
IF ( config_flags%h_sca_adv_order <= 4 ) THEN
# include "HALO_EM_SCALAR_OLD_E_5.inc"
ELSE IF ( config_flags%h_sca_adv_order <= 6 ) THEN
# include "HALO_EM_SCALAR_OLD_E_7.inc"
ELSE
WRITE(wrf_err_message,*)'solve_em_tl: invalid h_sca_adv_order = ',config_flags%h_sca_adv_order
CALL wrf_error_fatal(TRIM(wrf_err_message))
ENDIF
#else
WRITE(wrf_err_message,*)'cannot use pd scheme with RSL - use RSL-LITE'
CALL wrf_error_fatal(TRIM(wrf_err_message))
#endif
endif
#endif
#ifdef DM_PARALLEL
# include "PERIOD_BDY_EM_SCALAR_OLD.inc"
#endif
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
IF (num_3d_s >= PARAM_FIRST_SCALAR) THEN
DO im = PARAM_FIRST_SCALAR , num_3d_s
CALL g_set_physical_bc3d( scalar_old(ims,kms,jms,im),g_scalar_old(ims,kms,jms,im), 'p', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
END DO
ENDIF
END DO
!$OMP END PARALLEL DO
END IF ! end if for scalar_adv_opt
! chem
IF ((config_flags%chem_adv_opt /= ORIGINAL .and. config_flags%chem_adv_opt /= WENO_SCALAR) .and. (rk_step == rk_order)) THEN
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
CALL wrf_debug ( 200 , ' call g_rk_update_scalar_pd chem' )
DO im = PARAM_FIRST_SCALAR, num_3d_c
!!!!! REPLACE WITH g_rk_update_scalar_pd WHEN chem IS NEEDED. Ning Pan
CALL rk_update_scalar_pd( im, im, &
chem_old(ims,kms,jms,im), &
chem_tend(ims,kms,jms,im), &
grid%c1h, grid%c2h, &
grid%mu_1, grid%mu_1, grid%mub, &
rk_step, dt_rk, grid%spec_zone, &
config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
ENDDO
END DO
!$OMP END PARALLEL DO
!---------------------- positive definite bc call
#ifdef DM_PARALLEL
IF (config_flags%chem_adv_opt /= ORIGINAL .and. config_flags%chem_adv_opt /= WENO_SCALAR) THEN
IF ( config_flags%h_sca_adv_order <= 4 ) THEN
# include "HALO_EM_CHEM_OLD_E_5.inc"
ELSE IF ( config_flags%h_sca_adv_order <= 6 ) THEN
# include "HALO_EM_CHEM_OLD_E_7.inc"
ELSE
WRITE(wrf_err_message,*)'solve_em_tl: invalid h_sca_adv_order = ',config_flags%h_sca_adv_order
CALL wrf_error_fatal(TRIM(wrf_err_message))
ENDIF
ENDIF
#endif
#ifdef DM_PARALLEL
# include "PERIOD_BDY_EM_CHEM_OLD.inc"
#endif
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
IF (num_3d_c >= PARAM_FIRST_SCALAR) THEN
DO im = PARAM_FIRST_SCALAR , num_3d_c
!!!!! REPLACE WITH g_set_physical_bc3d WHEN chem IS NEEDED. Ning Pan
CALL set_physical_bc3d( chem_old(ims,kms,jms,im), 'p', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
END DO
ENDIF
END DO
!$OMP END PARALLEL DO
ENDIF ! end if for chem_adv_opt
! tracer
IF ((config_flags%tracer_adv_opt /= ORIGINAL .and. config_flags%tracer_adv_opt /= WENO_SCALAR) .and. (rk_step == rk_order)) THEN
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
CALL wrf_debug ( 200 , ' call g_rk_update_scalar_pd tracer' )
DO im = PARAM_FIRST_SCALAR, num_tracer
CALL g_rk_update_scalar_pd( im, im, &
tracer_old(ims,kms,jms,im),g_tracer_old(ims,kms,jms,im), &
tracer_tend(ims,kms,jms,im),g_tracer_tend(ims,kms,jms,im), &
grid%mu_1, grid%g_mu_1, grid%mu_1, grid%g_mu_1, grid%mub, &
rk_step, dt_rk, grid%spec_zone, &
config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
ENDDO
END DO
!$OMP END PARALLEL DO
!---------------------- positive definite bc call
#ifdef DM_PARALLEL
IF (config_flags%tracer_adv_opt /= ORIGINAL .and. config_flags%tracer_adv_opt /= WENO_SCALAR) THEN
IF ( config_flags%h_sca_adv_order <= 4 ) THEN
# include "HALO_EM_TRACER_OLD_E_5_TL.inc"
ELSE IF ( config_flags%h_sca_adv_order <= 6 ) THEN
# include "HALO_EM_TRACER_OLD_E_7_TL.inc"
ELSE
WRITE(wrf_err_message,*)'solve_em_tl: invalid h_sca_adv_order = ',config_flags%h_sca_adv_order
CALL wrf_error_fatal(TRIM(wrf_err_message))
ENDIF
ENDIF
#endif
#ifdef DM_PARALLEL
# include "PERIOD_BDY_EM_TRACER_OLD.inc"
#endif
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
IF (num_tracer >= PARAM_FIRST_SCALAR) THEN
DO im = PARAM_FIRST_SCALAR , num_tracer
CALL g_set_physical_bc3d( tracer_old(ims,kms,jms,im), &
g_tracer_old(ims,kms,jms,im), 'p', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
END DO
ENDIF
END DO
!$OMP END PARALLEL DO
ENDIF ! end if for tracer_adv_opt
! tke
IF ((config_flags%tke_adv_opt /= ORIGINAL .and. config_flags%tke_adv_opt /= WENO_SCALAR) .and. (rk_step == rk_order) &
.and. (config_flags%km_opt .eq. 2) ) THEN
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
CALL wrf_debug ( 200 , ' call g_rk_update_scalar_pd tke ' )
CALL g_rk_update_scalar_pd( 1, 1, &
grid%tke_1,grid%g_tke_1, &
tke_tend(ims,kms,jms),g_tke_tend(ims,kms,jms), &
grid%mu_1,grid%g_mu_1, grid%mu_1,grid%g_mu_1, grid%mub, &
rk_step, dt_rk, grid%spec_zone, &
config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
ENDDO
!$OMP END PARALLEL DO
!---------------------- positive definite bc call
#ifdef DM_PARALLEL
IF (config_flags%tke_adv_opt /= ORIGINAL .and. config_flags%tke_adv_opt /= WENO_SCALAR) THEN
IF ( config_flags%h_sca_adv_order <= 4 ) THEN
# include "HALO_EM_TKE_OLD_E_5_TL.inc"
ELSE IF ( config_flags%h_sca_adv_order <= 6 ) THEN
# include "HALO_EM_TKE_OLD_E_7_TL.inc"
ELSE
WRITE(wrf_err_message,*)'solve_em_tl: invalid h_sca_adv_order = ',config_flags%h_sca_adv_order
CALL wrf_error_fatal(TRIM(wrf_err_message))
ENDIF
ENDIF
#endif
#ifdef DM_PARALLEL
# include "PERIOD_BDY_EM_TKE_OLD.inc"
#endif
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
CALL g_set_physical_bc3d( grid%tke_1,grid%g_tke_1, 'p', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
END DO
!$OMP END PARALLEL DO
!--- end of positive definite physics tendency update
END IF ! end if for tke_adv_opt
#ifdef DM_PARALLEL
!
! Stencils for patch communications (WCS, 29 June 2001)
!
! * * * * *
! * * * * *
! * * + * *
! * * * * *
! * * * * *
!
! ru_m x
! rv_m x
! ww_m x
! mut x
!
!--------------------------------------------------------------
# include "HALO_EM_D_TL.inc"
! WCS addition 11/19/08
# include "PERIOD_EM_DA.inc"
#endif
!<DESCRIPTION>
!<pre>
! (4) Still within the RK loop, the scalar variables are advanced.
!
! For the moist and chem variables, each one is advanced
! individually, using named loops "moist_variable_loop:"
! and "chem_variable_loop:". Each RK substep begins by
! calculating the advective tendency, and, for the first RK step,
! 3D mixing (calling rk_scalar_tend) followed by an update
! of the scalar (calling rk_update_scalar).
!</pre>
!</DESCRIPTION>
moist_scalar_advance: IF (num_3d_m >= PARAM_FIRST_SCALAR ) THEN
moist_variable_loop: DO im = PARAM_FIRST_SCALAR, num_3d_m
! adv_moist_cond is set in module_physics_init based on mp_physics choice
! true except for Ferrier scheme
IF (grid%adv_moist_cond .or. im==p_qv ) THEN
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij, tenddec )
moist_tile_loop_1: DO ij = 1 , grid%num_tiles
CALL wrf_debug ( 200 , ' call g_rk_scalar_tend moist' )
tenddec = .false.
BENCH_START(g_rk_scalar_tend_tim)
CALL g_rk_scalar_tend ( im, im, config_flags, tenddec, &
rk_step, dt_rk, &
grid%ru_m, grid%g_ru_m, &
grid%rv_m, grid%g_rv_m, &
grid%ww_m, grid%g_ww_m, &
grid%muts, grid%g_muts, grid%mub, grid%mu_1, grid%g_mu_1, &
grid%alt, grid%g_alt, &
moist_old(ims,kms,jms,im), g_moist_old(ims,kms,jms,im), &
moist(ims,kms,jms,im), g_moist(ims,kms,jms,im), &
moist_tend(ims,kms,jms,im), g_moist_tend(ims,kms,jms,im), &
advect_tend, g_advect_tend, h_tendency, g_h_tendency, &
z_tendency, g_z_tendency, grid%rqvften, grid%g_rqvften, &
grid%qv_base, .true., grid%fnm, grid%fnp, &
grid%msfux,grid%msfuy, grid%msfvx, grid%msfvx_inv,&
grid%msfvy, grid%msftx,grid%msfty, &
grid%rdx, grid%rdy, grid%rdn, grid%rdnw, grid%khdif, &
grid%kvdif, grid%xkhh,grid%g_xkhh, &
grid%diff_6th_opt, grid%diff_6th_factor, &
config_flags%moist_adv_opt, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
! IF( rk_step == 1 .AND. config_flags%use_q_diabatic == 1 )THEN
! IF( im.eq.p_qv .or. im.eq.p_qc )THEN
! CALL g_q_diabatic_add ( im, im, &
! dt_rk, grid%mut, grid%g_mut, &
! grid%qv_diabatic, grid%g_qv_diabatic, &
! grid%qc_diabatic, grid%g_qc_diabatic, &
! moist_tend(ims,kms,jms,im), &
! g_moist_tend(ims,kms,jms,im), &
! ids, ide, jds, jde, kds, kde, &
! ims, ime, jms, jme, kms, kme, &
! grid%i_start(ij), grid%i_end(ij), &
! grid%j_start(ij), grid%j_end(ij), &
! k_start , k_end )
! ENDIF
! ENDIF
BENCH_END(g_rk_scalar_tend_tim)
BENCH_START(g_rlx_bdy_scalar_tim)
IF( ( config_flags%specified .or. config_flags%nested ) .and. rk_step == 1 ) THEN
IF ( im .EQ. P_QV .OR. config_flags%nested ) THEN
CALL g_relax_bdy_scalar ( moist_tend(ims,kms,jms,im), g_moist_tend(ims,kms,jms,im), &
moist(ims,kms,jms,im), g_moist(ims,kms,jms,im), &
grid%mut, grid%g_mut, &
moist_bxs(jms,kms,1,im),g_moist_bxs(jms,kms,1,im), &
moist_bxe(jms,kms,1,im),g_moist_bxe(jms,kms,1,im), &
moist_bys(ims,kms,1,im),g_moist_bys(ims,kms,1,im), &
moist_bye(ims,kms,1,im),g_moist_bye(ims,kms,1,im), &
moist_btxs(jms,kms,1,im),g_moist_btxs(jms,kms,1,im), &
moist_btxe(jms,kms,1,im),g_moist_btxe(jms,kms,1,im), &
moist_btys(ims,kms,1,im),g_moist_btys(ims,kms,1,im), &
moist_btye(ims,kms,1,im),g_moist_btye(ims,kms,1,im), &
config_flags%spec_bdy_width, grid%spec_zone, grid%relax_zone, &
grid%dtbc, grid%fcx, grid%gcx, &
config_flags, &
ids,ide, jds,jde, kds,kde, & ! domain dims
ims,ime, jms,jme, kms,kme, & ! memory dims
ips,ipe, jps,jpe, kps,kpe, & ! patch dims
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
CALL g_spec_bdy_scalar ( moist_tend(ims,kms,jms,im), g_moist_tend(ims,kms,jms,im), &
moist_bxs(jms,kms,1,im),g_moist_bxs(jms,kms,1,im), &
moist_bxe(jms,kms,1,im),g_moist_bxe(jms,kms,1,im), &
moist_bys(ims,kms,1,im),g_moist_bys(ims,kms,1,im), &
moist_bye(ims,kms,1,im),g_moist_bye(ims,kms,1,im), &
moist_btxs(jms,kms,1,im),g_moist_btxs(jms,kms,1,im), &
moist_btxe(jms,kms,1,im),g_moist_btxe(jms,kms,1,im), &
moist_btys(ims,kms,1,im),g_moist_btys(ims,kms,1,im), &
moist_btye(ims,kms,1,im),g_moist_btye(ims,kms,1,im), &
config_flags%spec_bdy_width, grid%spec_zone, &
config_flags, &
ids,ide, jds,jde, kds,kde, & ! domain dims
ims,ime, jms,jme, kms,kme, & ! memory dims
ips,ipe, jps,jpe, kps,kpe, & ! patch dims
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
ENDIF
ENDIF
BENCH_END(g_rlx_bdy_scalar_tim)
ENDDO moist_tile_loop_1
!$OMP END PARALLEL DO
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij, tenddec )
moist_tile_loop_2: DO ij = 1 , grid%num_tiles
CALL wrf_debug ( 200 , ' call g_rk_update_scalar' )
tenddec = .false.
BENCH_START(g_update_scal_tim)
CALL g_rk_update_scalar( scs=im, sce=im, &
scalar_1=moist_old(ims,kms,jms,im), &
g_scalar_1=g_moist_old(ims,kms,jms,im), &
scalar_2=moist(ims,kms,jms,im), &
g_scalar_2=g_moist(ims,kms,jms,im), &
sc_tend=moist_tend(ims,kms,jms,im), &
g_sc_tend=g_moist_tend(ims,kms,jms,im), &
advect_tend=advect_tend,g_advect_tend=g_advect_tend, &
h_tendency=h_tendency, g_h_tendency=g_h_tendency, &
z_tendency=z_tendency, g_z_tendency=g_z_tendency, &
msftx=grid%msftx,msfty=grid%msfty, &
mu_old=grid%mu_1, g_mu_old=grid%g_mu_1, &
mu_new=grid%mu_2,g_mu_new=grid%g_mu_2,mu_base=grid%mub, &
rk_step=rk_step, dt=dt_rk, spec_zone=grid%spec_zone, &
config_flags=config_flags, tenddec=tenddec, &
ids=ids, ide=ide, jds=jds, jde=jde, kds=kds, kde=kde, &
ims=ims, ime=ime, jms=jms, jme=jme, kms=kms, kme=kme, &
its=grid%i_start(ij), ite=grid%i_end(ij), &
jts=grid%j_start(ij), jte=grid%j_end(ij), &
kts=k_start , kte=k_end )
! IF( rk_step == rk_order .AND. config_flags%use_q_diabatic == 1 )THEN
! IF( im.eq.p_qv .or. im.eq.p_qc )THEN
! CALL g_q_diabatic_subtr( im, im, &
! dt_rk, &
! grid%qv_diabatic, grid%g_qv_diabatic, &
! grid%qc_diabatic, grid%g_qc_diabatic, &
! moist(ims,kms,jms,im), &
! g_moist(ims,kms,jms,im), &
! ids, ide, jds, jde, kds, kde, &
! ims, ime, jms, jme, kms, kme, &
! grid%i_start(ij), grid%i_end(ij), &
! grid%j_start(ij), grid%j_end(ij), &
! k_start , k_end )
! ENDIF
! ENDIF
BENCH_END(g_update_scal_tim)
BENCH_START(g_flow_depbdy_tim)
IF( config_flags%specified ) THEN
IF(im .ne. P_QV)THEN
CALL g_flow_dep_bdy ( moist(ims,kms,jms,im), g_moist(ims,kms,jms,im), &
grid%ru_m, grid%rv_m, config_flags, &
grid%spec_zone, &
ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
ips,ipe, jps,jpe, kps,kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
ENDIF
ENDIF
BENCH_END(g_flow_depbdy_tim)
ENDDO moist_tile_loop_2
!$OMP END PARALLEL DO
ENDIF !-- if (grid%adv_moist_cond .or. im==p_qv ) then
ENDDO moist_variable_loop
ENDIF moist_scalar_advance
BENCH_START(g_tke_adv_tim)
TKE_advance: IF (config_flags%km_opt .eq. 2) then
#ifdef DM_PARALLEL
IF ( config_flags%h_mom_adv_order <= 4 ) THEN
# include "HALO_EM_TKE_ADVECT_3_TL.inc"
ELSE IF ( config_flags%h_mom_adv_order <= 6 ) THEN
# include "HALO_EM_TKE_ADVECT_5_TL.inc"
ELSE
WRITE(wrf_err_message,*)'solve_em_tl: invalid h_mom_adv_order = ',config_flags%h_mom_adv_order
CALL wrf_error_fatal(TRIM(wrf_err_message))
ENDIF
#endif
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij, tenddec )
tke_tile_loop_1: DO ij = 1 , grid%num_tiles
CALL wrf_debug ( 200 , ' call g_rk_scalar_tend for tke' )
tenddec = .false.
CALL g_rk_scalar_tend ( 1, 1, config_flags, tenddec, &
rk_step, dt_rk, &
grid%ru_m,grid%g_ru_m, grid%rv_m,grid%g_rv_m, grid%ww_m,grid%g_ww_m, &
grid%muts,grid%g_muts, grid%mub, grid%mu_1,grid%g_mu_1, &
grid%alt,grid%g_alt, &
grid%tke_1,grid%g_tke_1, &
grid%tke_2,grid%g_tke_2, &
tke_tend(ims,kms,jms),g_tke_tend(ims,kms,jms), &
advect_tend,g_advect_tend,h_tendency,g_h_tendency, &
z_tendency,g_z_tendency,grid%rqvften,grid%g_rqvften, &
grid%qv_base, .false., grid%fnm, grid%fnp, &
grid%msfux,grid%msfuy, grid%msfvx, grid%msfvx_inv, &
grid%msfvy, grid%msftx,grid%msfty, &
grid%rdx, grid%rdy, grid%rdn, grid%rdnw, grid%khdif, &
grid%kvdif, grid%xkhh,grid%g_xkhh, &
grid%diff_6th_opt, grid%diff_6th_factor, &
config_flags%tke_adv_opt, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
ENDDO tke_tile_loop_1
!$OMP END PARALLEL DO
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij, tenddec )
tke_tile_loop_2: DO ij = 1 , grid%num_tiles
CALL wrf_debug ( 200 , ' call g_rk_update_scalar tke' )
tenddec = .false.
CALL g_rk_update_scalar( scs=1, sce=1, &
scalar_1=grid%tke_1, g_scalar_1=grid%g_tke_1, &
scalar_2=grid%tke_2, g_scalar_2=grid%g_tke_2, &
sc_tend=tke_tend(ims,kms,jms), &
g_sc_tend=g_tke_tend(ims,kms,jms), &
advect_tend=advect_tend,g_advect_tend=g_advect_tend, &
h_tendency=h_tendency, g_h_tendency=g_h_tendency, &
z_tendency=z_tendency, g_z_tendency=g_z_tendency, &
msftx=grid%msftx,msfty=grid%msfty, &
mu_old=grid%mu_1, g_mu_old=grid%g_mu_1, &
mu_new=grid%mu_2,g_mu_new=grid%g_mu_2,mu_base=grid%mub, &
rk_step=rk_step, dt=dt_rk, spec_zone=grid%spec_zone, &
config_flags=config_flags, tenddec=tenddec, &
ids=ids, ide=ide, jds=jds, jde=jde, kds=kds, kde=kde, &
ims=ims, ime=ime, jms=jms, jme=jme, kms=kms, kme=kme, &
its=grid%i_start(ij), ite=grid%i_end(ij), &
jts=grid%j_start(ij), jte=grid%j_end(ij), &
kts=k_start , kte=k_end )
! bound the tke (greater than 0, less than tke_upper_bound)
CALL g_bound_tke( grid%tke_2, grid%g_tke_2, grid%tke_upper_bound, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
IF( config_flags%specified .or. config_flags%nested ) THEN
CALL g_flow_dep_bdy ( grid%tke_2,grid%g_tke_2, &
grid%ru_m, grid%rv_m, config_flags, &
grid%spec_zone, &
ids,ide, jds,jde, kds,kde, & ! domain dims
ims,ime, jms,jme, kms,kme, & ! memory dims
ips,ipe, jps,jpe, kps,kpe, & ! patch dims
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
ENDIF
ENDDO tke_tile_loop_2
!$OMP END PARALLEL DO
ENDIF TKE_advance
BENCH_END(g_tke_adv_tim)
#if (WRF_CHEM==1)
! next the chemical species
BENCH_START(g_chem_adv_tim)
chem_scalar_advance: IF (num_3d_c >= PARAM_FIRST_SCALAR) THEN
chem_variable_loop: DO ic = PARAM_FIRST_SCALAR, num_3d_c
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij, tenddec )
chem_tile_loop_1: DO ij = 1 , grid%num_tiles
CALL wrf_debug ( 200 , ' call g_rk_scalar_tend in chem_tile_loop_1' )
!!!!! REPLACE WITH g_rk_scalar_tend WHEN chem IS NEEDED. Ning Pan
tenddec = (( config_flags%chemdiag == USECHEMDIAG ) .and. &
( adv_ct_indices(ic) >= PARAM_FIRST_SCALAR ))
CALL rk_scalar_tend ( ic, ic, config_flags,tenddec, &
rk_step, dt_rk, &
grid%ru_m, grid%rv_m, grid%ww_m, &
grid%muts, grid%mub, grid%mu_1, &
grid%alt, &
chem_old(ims,kms,jms,ic), &
chem(ims,kms,jms,ic), &
chem_tend(ims,kms,jms,ic), &
advect_tend,h_tendency,z_tendency,grid%rqvften, &
grid%qv_base, .false., grid%fnm, grid%fnp, &
grid%msfux,grid%msfuy, grid%msfvx, grid%msfvx_inv, &
grid%msfvy, grid%msftx,grid%msfty, &
grid%rdx, grid%rdy, grid%rdn, grid%rdnw, &
grid%khdif, grid%kvdif, grid%xkhh, &
grid%diff_6th_opt, grid%diff_6th_factor, &
config_flags%chem_adv_opt, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
!
! Currently, chemistry species with specified boundaries (i.e. the mother
! domain) are being over written by flow_dep_bdy_chem. So, relax_bdy and
! spec_bdy are only called for nests. For boundary conditions from global model or larger domain,
! chem is uncoupled, and only used for one row/column on inflow (if have_bcs_chem=.true.)
!
IF( ( config_flags%nested ) .and. rk_step == 1 ) THEN
IF(ic.eq.1)CALL wrf_debug ( 10 , ' have_bcs_chem' )
!!!!! REPLACE WITH g_relax_bdy_scalar WHEN chem IS NEEDED. Ning Pan
CALL relax_bdy_scalar ( chem_tend(ims,kms,jms,ic), &
chem(ims,kms,jms,ic), grid%mut, &
grid%c1h, grid%c2h, &
chem_bxs(jms,kms,1,ic),chem_bxe(jms,kms,1,ic), &
chem_bys(ims,kms,1,ic),chem_bye(ims,kms,1,ic), &
chem_btxs(jms,kms,1,ic),chem_btxe(jms,kms,1,ic), &
chem_btys(ims,kms,1,ic),chem_btye(ims,kms,1,ic), &
config_flags%spec_bdy_width, grid%spec_zone, grid%relax_zone, &
grid%dtbc, grid%fcx, grid%gcx, &
config_flags, &
ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
ips,ipe, jps,jpe, kps,kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
!!!!! REPLACE WITH g_spec_bdy_scalar WHEN chem IS NEEDED. Ning Pan
CALL spec_bdy_scalar ( chem_tend(ims,kms,jms,ic), &
chem_bxs(jms,kms,1,ic),chem_bxe(jms,kms,1,ic), &
chem_bys(ims,kms,1,ic),chem_bye(ims,kms,1,ic), &
chem_btxs(jms,kms,1,ic),chem_btxe(jms,kms,1,ic), &
chem_btys(ims,kms,1,ic),chem_btye(ims,kms,1,ic), &
config_flags%spec_bdy_width, grid%spec_zone, &
config_flags, &
ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
ips,ipe, jps,jpe, kps,kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
ENDIF
ENDDO chem_tile_loop_1
!$OMP END PARALLEL DO
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij, tenddec )
chem_tile_loop_2: DO ij = 1 , grid%num_tiles
CALL wrf_debug ( 200 , ' call rk_update_scalar' )
!!!!! REPLACE WITH g_rk_update_scalar WHEN chem IS NEEDED. Ning Pan
tenddec = (( config_flags%chemdiag == USECHEMDIAG ) .and. &
( adv_ct_indices(ic) >= PARAM_FIRST_SCALAR ))
CALL rk_update_scalar( scs=ic, sce=ic, &
scalar_1=chem_old(ims,kms,jms,ic), &
scalar_2=chem(ims,kms,jms,ic), &
sc_tend=chem_tend(ims,kms,jms,ic), &
advect_tend=advect_tend, &
h_tendency=h_tendency, z_tendency=z_tendency, &
msftx=grid%msftx,msfty=grid%msfty, &
mu_old=grid%mu_1, mu_new=grid%mu_2, mu_base=grid%mub, &
rk_step=rk_step, dt=dt_rk, spec_zone=grid%spec_zone, &
config_flags=config_flags, tenddec=tenddec, &
ids=ids, ide=ide, jds=jds, jde=jde, kds=kds, kde=kde, &
ims=ims, ime=ime, jms=jms, jme=jme, kms=kms, kme=kme, &
its=grid%i_start(ij), ite=grid%i_end(ij), &
jts=grid%j_start(ij), jte=grid%j_end(ij), &
kts=k_start , kte=k_end )
IF( config_flags%specified ) THEN
!!!!! REPLACE WITH g_flow_dep_bdy_chem WHEN chem IS NEEDED. Ning Pan
CALL flow_dep_bdy_chem( chem(ims,kms,jms,ic), &
chem_bxs(jms,kms,1,ic), chem_btxs(jms,kms,1,ic), &
chem_bxe(jms,kms,1,ic), chem_btxe(jms,kms,1,ic), &
chem_bys(ims,kms,1,ic), chem_btys(ims,kms,1,ic), &
chem_bye(ims,kms,1,ic), chem_btye(ims,kms,1,ic), &
dt_rk+grid%dtbc, &
config_flags%spec_bdy_width,grid%z, &
grid%have_bcs_chem, &
grid%ru_m, grid%rv_m, config_flags,grid%alt, &
grid%t_1,grid%pb,grid%p,t0,p1000mb,rcp,grid%ph_2,grid%phb,g, &
grid%spec_zone,ic, &
ids,ide, jds,jde, kds,kde, & ! domain dims
ims,ime, jms,jme, kms,kme, & ! memory dims
ips,ipe, jps,jpe, kps,kpe, & ! patch dims
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
ENDIF
ENDDO chem_tile_loop_2
!$OMP END PARALLEL DO
ENDDO chem_variable_loop
ENDIF chem_scalar_advance
BENCH_END(g_chem_adv_tim)
#endif
! next the chemical species
BENCH_START(g_tracer_adv_tim)
tracer_advance: IF (num_tracer >= PARAM_FIRST_SCALAR) THEN
tracer_variable_loop: DO ic = PARAM_FIRST_SCALAR, num_tracer
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij, tenddec )
tracer_tile_loop_1: DO ij = 1 , grid%num_tiles
CALL wrf_debug ( 15 , ' call g_rk_scalar_tend in tracer_tile_loop_1' )
tenddec = .false.
CALL g_rk_scalar_tend ( ic, ic, config_flags, tenddec, &
rk_step, dt_rk, &
grid%ru_m, grid%g_ru_m, &
grid%rv_m, grid%g_rv_m, &
grid%ww_m, grid%g_ww_m, &
grid%muts, grid%g_muts, grid%mub, grid%mu_1, grid%g_mu_1, &
grid%alt, grid%g_alt, &
tracer_old(ims,kms,jms,ic), g_tracer_old(ims,kms,jms,ic), &
tracer(ims,kms,jms,ic), g_tracer(ims,kms,jms,ic), &
tracer_tend(ims,kms,jms,ic), g_tracer_tend(ims,kms,jms,ic), &
advect_tend, g_advect_tend, h_tendency,g_h_tendency, &
z_tendency, g_z_tendency, grid%rqvften, grid%g_rqvften, &
grid%qv_base, .false., grid%fnm, grid%fnp, &
grid%msfux,grid%msfuy, grid%msfvx, grid%msfvx_inv, &
grid%msfvy, grid%msftx,grid%msfty, &
grid%rdx, grid%rdy, grid%rdn, grid%rdnw, &
grid%khdif, grid%kvdif, grid%xkhh,grid%g_xkhh, &
grid%diff_6th_opt, grid%diff_6th_factor, &
config_flags%tracer_adv_opt, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
!
! Currently, chemistry species with specified boundaries (i.e. the mother
! domain) are being over written by flow_dep_bdy_chem. So, relax_bdy and
! spec_bdy are only called for nests. For boundary conditions from global model or larger domain,
! chem is uncoupled, and only used for one row/column on inflow (if have_bcs_chem=.true.)
!
IF( ( config_flags%nested ) .and. rk_step == 1 ) THEN
IF(ic.eq.1)CALL wrf_debug ( 10 , ' have_bcs_tracer' )
!!!!! REPLACE WITH g_relax_bdy_scalar WHEN tracer IS NEEDED. Ning Pan
CALL relax_bdy_scalar ( tracer_tend(ims,kms,jms,ic), &
tracer(ims,kms,jms,ic), grid%mut, &
grid%c1h, grid%c2h, &
tracer_bxs(jms,kms,1,ic),tracer_bxe(jms,kms,1,ic), &
tracer_bys(ims,kms,1,ic),tracer_bye(ims,kms,1,ic), &
tracer_btxs(jms,kms,1,ic),tracer_btxe(jms,kms,1,ic), &
tracer_btys(ims,kms,1,ic),tracer_btye(ims,kms,1,ic), &
config_flags%spec_bdy_width, grid%spec_zone, grid%relax_zone, &
grid%dtbc, grid%fcx, grid%gcx, &
config_flags, &
ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
ips,ipe, jps,jpe, kps,kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
!!!!! REPLACE WITH g_spec_bdy_scalar WHEN tracer IS NEEDED. Ning Pan
CALL spec_bdy_scalar ( tracer_tend(ims,kms,jms,ic), &
tracer_bxs(jms,kms,1,ic),tracer_bxe(jms,kms,1,ic), &
tracer_bys(ims,kms,1,ic),tracer_bye(ims,kms,1,ic), &
tracer_btxs(jms,kms,1,ic),tracer_btxe(jms,kms,1,ic), &
tracer_btys(ims,kms,1,ic),tracer_btye(ims,kms,1,ic), &
config_flags%spec_bdy_width, grid%spec_zone, &
config_flags, &
ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
ips,ipe, jps,jpe, kps,kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
ENDIF
ENDDO tracer_tile_loop_1
!$OMP END PARALLEL DO
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij, tenddec )
tracer_tile_loop_2: DO ij = 1 , grid%num_tiles
CALL wrf_debug ( 200 , ' call g_rk_update_scalar tracer ' )
tenddec = .false.
CALL g_rk_update_scalar( scs=ic, sce=ic, &
scalar_1=tracer_old(ims,kms,jms,ic), &
g_scalar_1=g_tracer_old(ims,kms,jms,ic), &
scalar_2=tracer(ims,kms,jms,ic), &
g_scalar_2=g_tracer(ims,kms,jms,ic), &
sc_tend=tracer_tend(ims,kms,jms,ic), &
g_sc_tend=g_tracer_tend(ims,kms,jms,ic), &
advect_tend=advect_tend,g_advect_tend=g_advect_tend, &
h_tendency=h_tendency, g_h_tendency=g_h_tendency, &
z_tendency=z_tendency, g_z_tendency=g_z_tendency, &
msftx=grid%msftx,msfty=grid%msfty, &
mu_old=grid%mu_1, g_mu_old=grid%g_mu_1, &
mu_new=grid%mu_2, g_mu_new=grid%g_mu_2, mu_base=grid%mub, &
rk_step=rk_step, dt=dt_rk, spec_zone=grid%spec_zone, &
config_flags=config_flags, tenddec=tenddec, &
ids=ids, ide=ide, jds=jds, jde=jde, kds=kds, kde=kde, &
ims=ims, ime=ime, jms=jms, jme=jme, kms=kms, kme=kme, &
its=grid%i_start(ij), ite=grid%i_end(ij), &
jts=grid%j_start(ij), jte=grid%j_end(ij), &
kts=k_start , kte=k_end )
IF( config_flags%specified ) THEN
#if (WRF_CHEM==1)
!!!!! REPLACE WITH a_flow_dep_bdy_tracer WHEN tracer IS NEEDED. Ning Pan
CALL flow_dep_bdy_tracer( tracer(ims,kms,jms,ic), &
tracer_bxs(jms,kms,1,ic), tracer_btxs(jms,kms,1,ic), &
tracer_bxe(jms,kms,1,ic), tracer_btxe(jms,kms,1,ic), &
tracer_bys(ims,kms,1,ic), tracer_btys(ims,kms,1,ic), &
tracer_bye(ims,kms,1,ic), tracer_btye(ims,kms,1,ic), &
dt_rk+grid%dtbc, &
config_flags%spec_bdy_width,grid%z, &
grid%have_bcs_tracer, &
grid%ru_m, grid%rv_m, config_flags%tracer_opt,grid%alt, &
grid%t_1,grid%pb,grid%p,t0,p1000mb,rcp,grid%ph_2,grid%phb,g, &
grid%spec_zone,ic, &
ids,ide, jds,jde, kds,kde, & ! domain dims
ims,ime, jms,jme, kms,kme, & ! memory dims
ips,ipe, jps,jpe, kps,kpe, & ! patch dims
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
#else
CALL g_flow_dep_bdy ( tracer(ims,kms,jms,ic),g_tracer(ims,kms,jms,ic), &
grid%ru_m, grid%rv_m, config_flags, &
grid%spec_zone, &
ids,ide, jds,jde, kds,kde, & ! domain dims
ims,ime, jms,jme, kms,kme, & ! memory dims
ips,ipe, jps,jpe, kps,kpe, & ! patch dims
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
#endif
ENDIF
ENDDO tracer_tile_loop_2
!$OMP END PARALLEL DO
ENDDO tracer_variable_loop
ENDIF tracer_advance
BENCH_END(g_tracer_adv_tim)
! next the other scalar species
other_scalar_advance: IF (num_3d_s >= PARAM_FIRST_SCALAR) THEN
scalar_variable_loop: do is = PARAM_FIRST_SCALAR, num_3d_s
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij, tenddec )
scalar_tile_loop_1: DO ij = 1 , grid%num_tiles
CALL wrf_debug ( 200 , ' call g_rk_scalar_tend scalar' )
tenddec = .false.
CALL g_rk_scalar_tend ( is, is, config_flags, tenddec, &
rk_step, dt_rk, &
grid%ru_m, grid%g_ru_m, &
grid%rv_m, grid%g_rv_m, &
grid%ww_m, grid%g_ww_m, &
grid%muts, grid%g_muts, grid%mub, grid%mu_1, grid%g_mu_1, &
grid%alt, grid%g_alt, &
scalar_old(ims,kms,jms,is), g_scalar_old(ims,kms,jms,is), &
scalar(ims,kms,jms,is), g_scalar(ims,kms,jms,is), &
scalar_tend(ims,kms,jms,is), g_scalar_tend(ims,kms,jms,is), &
advect_tend, g_advect_tend, h_tendency,g_h_tendency, &
z_tendency, g_z_tendency, grid%rqvften, grid%g_rqvften, &
grid%qv_base, .false., grid%fnm, grid%fnp, &
grid%msfux,grid%msfuy, grid%msfvx, grid%msfvx_inv, &
grid%msfvy, grid%msftx,grid%msfty, &
grid%rdx, grid%rdy, grid%rdn, grid%rdnw, &
grid%khdif, grid%kvdif, grid%xkhh,grid%g_xkhh, &
grid%diff_6th_opt, grid%diff_6th_factor, &
config_flags%scalar_adv_opt, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
IF( config_flags%nested .and. (rk_step == 1) ) THEN
CALL g_relax_bdy_scalar ( scalar_tend(ims,kms,jms,is), g_scalar_tend(ims,kms,jms,is), &
scalar(ims,kms,jms,is), g_scalar(ims,kms,jms,is), &
grid%mut, grid%g_mut, &
scalar_bxs(jms,kms,1,is),g_scalar_bxs(jms,kms,1,is), &
scalar_bxe(jms,kms,1,is),g_scalar_bxe(jms,kms,1,is), &
scalar_bys(ims,kms,1,is),g_scalar_bys(ims,kms,1,is), &
scalar_bye(ims,kms,1,is),g_scalar_bye(ims,kms,1,is), &
scalar_btxs(jms,kms,1,is),g_scalar_btxs(jms,kms,1,is), &
scalar_btxe(jms,kms,1,is),g_scalar_btxe(jms,kms,1,is), &
scalar_btys(ims,kms,1,is),g_scalar_btys(ims,kms,1,is), &
scalar_btye(ims,kms,1,is),g_scalar_btye(ims,kms,1,is), &
config_flags%spec_bdy_width, grid%spec_zone, grid%relax_zone, &
grid%dtbc, grid%fcx, grid%gcx, &
config_flags, &
ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
ips,ipe, jps,jpe, kps,kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
CALL g_spec_bdy_scalar ( scalar_tend(ims,kms,jms,is), g_scalar_tend(ims,kms,jms,is), &
scalar_bxs(jms,kms,1,is),g_scalar_bxs(jms,kms,1,is), &
scalar_bxe(jms,kms,1,is),g_scalar_bxe(jms,kms,1,is), &
scalar_bys(ims,kms,1,is),g_scalar_bys(ims,kms,1,is), &
scalar_bye(ims,kms,1,is),g_scalar_bye(ims,kms,1,is), &
scalar_btxs(jms,kms,1,is),g_scalar_btxs(jms,kms,1,is), &
scalar_btxe(jms,kms,1,is),g_scalar_btxe(jms,kms,1,is), &
scalar_btys(ims,kms,1,is),g_scalar_btys(ims,kms,1,is), &
scalar_btye(ims,kms,1,is),g_scalar_btye(ims,kms,1,is), &
config_flags%spec_bdy_width, grid%spec_zone, &
config_flags, &
ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
ips,ipe, jps,jpe, kps,kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
ENDIF ! b.c test for chem nested boundary condition
ENDDO scalar_tile_loop_1
!$OMP END PARALLEL DO
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij, tenddec )
scalar_tile_loop_2: DO ij = 1 , grid%num_tiles
CALL wrf_debug ( 200 , ' call g_rk_update_scalar scalar' )
tenddec = .false.
CALL g_rk_update_scalar( scs=is, sce=is, &
scalar_1=scalar_old(ims,kms,jms,is), &
g_scalar_1=g_scalar_old(ims,kms,jms,is), &
scalar_2=scalar(ims,kms,jms,is), &
g_scalar_2=g_scalar(ims,kms,jms,is), &
sc_tend=scalar_tend(ims,kms,jms,is), &
g_sc_tend=g_scalar_tend(ims,kms,jms,is), &
advect_tend=advect_tend,g_advect_tend=g_advect_tend, &
h_tendency=h_tendency, g_h_tendency=g_h_tendency, &
z_tendency=z_tendency, g_z_tendency=g_z_tendency, &
msftx=grid%msftx,msfty=grid%msfty, &
mu_old=grid%mu_1, g_mu_old=grid%g_mu_1, &
mu_new=grid%mu_2,g_mu_new=grid%g_mu_2,mu_base=grid%mub, &
rk_step=rk_step, dt=dt_rk, spec_zone=grid%spec_zone, &
config_flags=config_flags, tenddec=tenddec, &
ids=ids, ide=ide, jds=jds, jde=jde, kds=kds, kde=kde, &
ims=ims, ime=ime, jms=jms, jme=jme, kms=kms, kme=kme, &
its=grid%i_start(ij), ite=grid%i_end(ij), &
jts=grid%j_start(ij), jte=grid%j_end(ij), &
kts=k_start , kte=k_end )
IF( config_flags%specified ) THEN
IF(is .ne. P_QNN)THEN
CALL g_flow_dep_bdy ( scalar(ims,kms,jms,is),g_scalar(ims,kms,jms,is), &
grid%ru_m, grid%rv_m, config_flags, &
grid%spec_zone, &
ids,ide, jds,jde, kds,kde, & ! domain dims
ims,ime, jms,jme, kms,kme, & ! memory dims
ips,ipe, jps,jpe, kps,kpe, & ! patch dims
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
ELSE
CALL g_flow_dep_bdy_qnn ( scalar(ims,kms,jms,is), g_scalar(ims,kms,jms,is), &
grid%ru_m, grid%rv_m, config_flags, &
grid%spec_zone, &
grid%ccn_conc, & ! RAS
ids,ide, jds,jde, kds,kde, & ! domain dims
ims,ime, jms,jme, kms,kme, & ! memory dims
ips,ipe, jps,jpe, kps,kpe, & ! patch dims
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
ENDIF
ENDIF
ENDDO scalar_tile_loop_2
!$OMP END PARALLEL DO
ENDDO scalar_variable_loop
ENDIF other_scalar_advance
! update the pressure and density at the new time level
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
BENCH_START(g_calc_p_rho_tim)
CALL g_calc_p_rho_phi( moist,g_moist, num_3d_m, config_flags%hypsometric_opt, &
grid%al,grid%g_al, grid%alb, grid%mu_2,grid%g_mu_2, grid%muts,grid%g_muts, &
grid%ph_2,grid%g_ph_2, grid%phb, grid%p, grid%g_p, grid%pb, grid%t_2,grid%g_t_2, &
p0, t0, grid%p_top, grid%znu, grid%znw, grid%dnw, grid%rdnw, &
grid%rdn, config_flags%non_hydrostatic, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
BENCH_END(g_calc_p_rho_tim)
ENDDO
!$OMP END PARALLEL DO
! Reset the boundary conditions if there is another corrector step.
! (rk_step < rk_order), else we'll handle it at the end of everything
! (after the split physics, before exiting the timestep).
rk_step_1_check: IF ( rk_step < rk_order ) THEN
!-----------------------------------------------------------
! rk3 substep polar filter for scalars (moist,chem,scalar)
!-----------------------------------------------------------
IF (config_flags%polar) THEN
IF ( num_3d_m >= PARAM_FIRST_SCALAR ) THEN
CALL wrf_debug ( 200 , ' call filter moist ' )
DO im = PARAM_FIRST_SCALAR, num_3d_m
IF ( config_flags%coupled_filtering ) THEN
CALL couple_scalars_for_filter ( FIELD=moist(ims,kms,jms,im) &
,MU=grid%mu_2 , MUB=grid%mub &
,C1=grid%c1h , C2=grid%c2h &
,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde &
,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme &
,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe )
END IF
CALL pxft ( grid=grid &
,lineno=__LINE__ &
,flag_uv = 0 &
,flag_rurv = 0 &
,flag_wph = 0 &
,flag_ww = 0 &
,flag_t = 0 &
,flag_mu = 0 &
,flag_mut = 0 &
,flag_moist = im &
,flag_chem = 0 &
,flag_scalar = 0 &
,flag_tracer = 0 &
,actual_distance_average=config_flags%actual_distance_average&
,pos_def = config_flags%pos_def &
,swap_pole_with_next_j = config_flags%swap_pole_with_next_j &
,moist=moist,chem=chem,tracer=tracer,scalar=scalar &
,fft_filter_lat = config_flags%fft_filter_lat &
,dclat = dclat &
,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde &
,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme &
,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe &
,imsx=imsx,imex=imex,jmsx=jmsx,jmex=jmex,kmsx=kmsx,kmex=kmex &
,ipsx=ipsx,ipex=ipex,jpsx=jmsx,jpex=jpex,kpsx=kpsx,kpex=kpex )
IF ( config_flags%coupled_filtering ) THEN
CALL uncouple_scalars_for_filter ( FIELD=moist(ims,kms,jms,im) &
,MU=grid%mu_2 , MUB=grid%mub &
,C1=grid%c1h , C2=grid%c2h &
,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde &
,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme &
,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe )
END IF
END DO
END IF
IF ( num_3d_c >= PARAM_FIRST_SCALAR ) THEN
CALL wrf_debug ( 200 , ' call filter chem ' )
DO im = PARAM_FIRST_SCALAR, num_3d_c
IF ( config_flags%coupled_filtering ) THEN
CALL couple_scalars_for_filter ( FIELD=chem(ims,kms,jms,im) &
,MU=grid%mu_2 , MUB=grid%mub &
,C1=grid%c1h , C2=grid%c2h &
,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde &
,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme &
,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe )
END IF
CALL pxft ( grid=grid &
,lineno=__LINE__ &
,flag_uv = 0 &
,flag_rurv = 0 &
,flag_wph = 0 &
,flag_ww = 0 &
,flag_t = 0 &
,flag_mu = 0 &
,flag_mut = 0 &
,flag_moist = 0 &
,flag_chem = im &
,flag_tracer = 0 &
,flag_scalar = 0 &
,actual_distance_average=config_flags%actual_distance_average&
,pos_def = config_flags%pos_def &
,swap_pole_with_next_j = config_flags%swap_pole_with_next_j &
,moist=moist,chem=chem,tracer=tracer,scalar=scalar &
,fft_filter_lat = config_flags%fft_filter_lat &
,dclat = dclat &
,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde &
,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme &
,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe &
,imsx=imsx,imex=imex,jmsx=jmsx,jmex=jmex,kmsx=kmsx,kmex=kmex &
,ipsx=ipsx,ipex=ipex,jpsx=jmsx,jpex=jpex,kpsx=kpsx,kpex=kpex )
IF ( config_flags%coupled_filtering ) THEN
CALL uncouple_scalars_for_filter ( FIELD=chem(ims,kms,jms,im) &
,MU=grid%mu_2 , MUB=grid%mub &
,C1=grid%c1h , C2=grid%c2h &
,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde &
,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme &
,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe )
END IF
END DO
END IF
IF ( num_tracer >= PARAM_FIRST_SCALAR ) THEN
CALL wrf_debug ( 200 , ' call filter tracer ' )
DO im = PARAM_FIRST_SCALAR, num_tracer
IF ( config_flags%coupled_filtering ) THEN
CALL couple_scalars_for_filter ( FIELD=tracer(ims,kms,jms,im) &
,MU=grid%mu_2 , MUB=grid%mub &
,C1=grid%c1h , C2=grid%c2h &
,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde &
,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme &
,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe )
END IF
CALL pxft ( grid=grid &
,lineno=__LINE__ &
,flag_uv = 0 &
,flag_rurv = 0 &
,flag_wph = 0 &
,flag_ww = 0 &
,flag_t = 0 &
,flag_mu = 0 &
,flag_mut = 0 &
,flag_moist = 0 &
,flag_chem = 0 &
,flag_tracer = im &
,flag_scalar = 0 &
,actual_distance_average=config_flags%actual_distance_average&
,pos_def = config_flags%pos_def &
,swap_pole_with_next_j = config_flags%swap_pole_with_next_j &
,moist=moist,chem=chem,tracer=tracer,scalar=scalar &
,fft_filter_lat = config_flags%fft_filter_lat &
,dclat = dclat &
,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde &
,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme &
,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe &
,imsx=imsx,imex=imex,jmsx=jmsx,jmex=jmex,kmsx=kmsx,kmex=kmex &
,ipsx=ipsx,ipex=ipex,jpsx=jmsx,jpex=jpex,kpsx=kpsx,kpex=kpex )
IF ( config_flags%coupled_filtering ) THEN
CALL uncouple_scalars_for_filter ( FIELD=tracer(ims,kms,jms,im) &
,MU=grid%mu_2 , MUB=grid%mub &
,C1=grid%c1h , C2=grid%c2h &
,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde &
,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme &
,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe )
END IF
END DO
END IF
IF ( num_3d_s >= PARAM_FIRST_SCALAR ) THEN
CALL wrf_debug ( 200 , ' call filter scalar ' )
DO im = PARAM_FIRST_SCALAR, num_3d_s
IF ( config_flags%coupled_filtering ) THEN
CALL couple_scalars_for_filter ( FIELD=scalar(ims,kms,jms,im) &
,MU=grid%mu_2 , MUB=grid%mub &
,C1=grid%c1h , C2=grid%c2h &
,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde &
,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme &
,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe )
END IF
CALL pxft ( grid=grid &
,lineno=__LINE__ &
,flag_uv = 0 &
,flag_rurv = 0 &
,flag_wph = 0 &
,flag_ww = 0 &
,flag_t = 0 &
,flag_mu = 0 &
,flag_mut = 0 &
,flag_moist = 0 &
,flag_chem = 0 &
,flag_tracer = 0 &
,flag_scalar = im &
,actual_distance_average=config_flags%actual_distance_average&
,pos_def = config_flags%pos_def &
,swap_pole_with_next_j = config_flags%swap_pole_with_next_j &
,moist=moist,chem=chem,tracer=tracer,scalar=scalar &
,fft_filter_lat = config_flags%fft_filter_lat &
,dclat = dclat &
,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde &
,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme &
,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe &
,imsx=imsx,imex=imex,jmsx=jmsx,jmex=jmex,kmsx=kmsx,kmex=kmex &
,ipsx=ipsx,ipex=ipex,jpsx=jmsx,jpex=jpex,kpsx=kpsx,kpex=kpex )
IF ( config_flags%coupled_filtering ) THEN
CALL uncouple_scalars_for_filter ( FIELD=scalar(ims,kms,jms,im) &
,MU=grid%mu_2 , MUB=grid%mub &
,C1=grid%c1h , C2=grid%c2h &
,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde &
,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme &
,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe )
END IF
END DO
END IF
END IF ! polar filter test
!-----------------------------------------------------------
! END rk3 substep polar filter for scalars (moist,chem,scalar)
!-----------------------------------------------------------
!-----------------------------------------------------------
! Stencils for patch communications (WCS, 29 June 2001)
!
! here's where we need a wide comm stencil - these are the
! uncoupled variables so are used for high order calc in
! advection and mixong routines.
!
!
! * * * * * * *
! * * * * * * * * * * * *
! * * * * * * * * * * * * *
! * + * * * + * * * * * + * * *
! * * * * * * * * * * * * *
! * * * * * * * * * * * *
! * * * * * * *
!
! al x
!
! 2D variable
! mu_2 x
!
! (adv order <=4)
! u_2 x
! v_2 x
! w_2 x
! t_2 x
! ph_2 x
!
! (adv order <=6)
! u_2 x
! v_2 x
! w_2 x
! t_2 x
! ph_2 x
!
! 4D variable
! moist x
! chem x
! scalar x
#ifdef DM_PARALLEL
IF ( config_flags%h_mom_adv_order <= 4 ) THEN
# include "HALO_EM_D2_3_TL.inc"
ELSE IF ( config_flags%h_mom_adv_order <= 6 ) THEN
# include "HALO_EM_D2_5_TL.inc"
ELSE
WRITE(wrf_err_message,*)'solve_em_tl: invalid h_mom_adv_order = ',config_flags%h_mom_adv_order
CALL wrf_error_fatal(TRIM(wrf_err_message))
ENDIF
# include "PERIOD_BDY_EM_D.inc"
# include "PERIOD_BDY_EM_MOIST2.inc"
# include "PERIOD_BDY_EM_CHEM2.inc"
# include "PERIOD_BDY_EM_TRACER2.inc"
# include "PERIOD_BDY_EM_SCALAR2.inc"
#endif
BENCH_START(g_bc_end_tim)
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
tile_bc_loop_1: DO ij = 1 , grid%num_tiles
CALL wrf_debug ( 200 , ' call g_rk_phys_bc_dry_2' )
CALL g_rk_phys_bc_dry_2( config_flags, &
grid%u_2,grid%g_u_2, grid%v_2,grid%g_v_2, grid%w_2,grid%g_w_2, &
grid%t_2,grid%g_t_2, grid%ph_2,grid%g_ph_2, grid%mu_2,grid%g_mu_2, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
BENCH_START(g_diag_w_tim)
IF (.not. config_flags%non_hydrostatic) THEN
CALL g_diagnose_w( ph_tend,g_ph_tend, grid%ph_2,grid%g_ph_2, grid%ph_1,grid%g_ph_1, &
grid%w_2,grid%g_w_2, grid%muts,grid%g_muts, dt_rk, &
grid%u_2,grid%g_u_2, grid%v_2,grid%g_v_2, grid%ht, &
grid%cf1, grid%cf2, grid%cf3, grid%rdx, grid%rdy, grid%msftx, grid%msfty, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
ENDIF
BENCH_END(g_diag_w_tim)
IF (num_3d_m >= PARAM_FIRST_SCALAR) THEN
moisture_loop_bdy_1 : DO im = PARAM_FIRST_SCALAR , num_3d_m
CALL g_set_physical_bc3d( moist(ims,kms,jms,im),g_moist(ims,kms,jms,im), 'p', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
END DO moisture_loop_bdy_1
ENDIF
IF (num_3d_c >= PARAM_FIRST_SCALAR) THEN
chem_species_bdy_loop_1 : DO ic = PARAM_FIRST_SCALAR , num_3d_c
!!!!! REPLACE WITH g_set_physical_bc3d WHEN chem IS NEEDED. Ning Pan
CALL set_physical_bc3d( chem(ims,kms,jms,ic), 'p', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end-1 )
END DO chem_species_bdy_loop_1
END IF
IF (num_tracer >= PARAM_FIRST_SCALAR) THEN
tracer_species_bdy_loop_1 : DO ic = PARAM_FIRST_SCALAR , num_tracer
CALL g_set_physical_bc3d( tracer(ims,kms,jms,ic),g_tracer(ims,kms,jms,ic), 'p', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end-1 )
END DO tracer_species_bdy_loop_1
END IF
IF (num_3d_s >= PARAM_FIRST_SCALAR) THEN
scalar_species_bdy_loop_1 : DO is = PARAM_FIRST_SCALAR , num_3d_s
CALL g_set_physical_bc3d( scalar(ims,kms,jms,is),g_scalar(ims,kms,jms,is), 'p', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end-1 )
END DO scalar_species_bdy_loop_1
END IF
IF (config_flags%km_opt .eq. 2) THEN
CALL g_set_physical_bc3d( grid%tke_2 ,grid%g_tke_2, 'p', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
END IF
END DO tile_bc_loop_1
!$OMP END PARALLEL DO
BENCH_END(g_bc_end_tim)
#ifdef DM_PARALLEL
! * * * * *
! * * * * * * * * *
! * + * * + * * * + * *
! * * * * * * * * *
! * * * * *
! moist, chem, scalar, tke x
IF ( config_flags%h_mom_adv_order <= 4 ) THEN
IF ( (config_flags%tke_adv_opt /= ORIGINAL .and. config_flags%tke_adv_opt /= WENO_SCALAR) .and. (rk_step == rk_order-1) ) THEN
# include "HALO_EM_TKE_5_TL.inc"
ELSE
# include "HALO_EM_TKE_3_TL.inc"
ENDIF
ELSE IF ( config_flags%h_mom_adv_order <= 6 ) THEN
IF ( (config_flags%tke_adv_opt /= ORIGINAL .and. config_flags%tke_adv_opt /= WENO_SCALAR) .and. (rk_step == rk_order-1) ) THEN
# include "HALO_EM_TKE_7_TL.inc"
ELSE
# include "HALO_EM_TKE_5_TL.inc"
ENDIF
ELSE
WRITE(wrf_err_message,*)'solve_em_tl: invalid h_sca_adv_order = ',config_flags%h_sca_adv_order
CALL wrf_error_fatal(TRIM(wrf_err_message))
ENDIF
IF ( num_moist .GE. PARAM_FIRST_SCALAR ) THEN
IF ( config_flags%h_sca_adv_order <= 4 ) THEN
IF ( (config_flags%moist_adv_opt /= ORIGINAL .and. config_flags%moist_adv_opt /= WENO_SCALAR) .and. (rk_step == rk_order-1) ) THEN
# include "HALO_EM_MOIST_E_5_TL.inc"
ELSE
# include "HALO_EM_MOIST_E_3_TL.inc"
END IF
ELSE IF ( config_flags%h_sca_adv_order <= 6 ) THEN
IF ( (config_flags%moist_adv_opt /= ORIGINAL .and. config_flags%moist_adv_opt /= WENO_SCALAR) .and. (rk_step == rk_order-1) ) THEN
# include "HALO_EM_MOIST_E_7_TL.inc"
ELSE
# include "HALO_EM_MOIST_E_5_TL.inc"
END IF
ELSE
WRITE(wrf_err_message,*)'solve_em_tl: invalid h_sca_adv_order = ',config_flags%h_sca_adv_order
CALL wrf_error_fatal(TRIM(wrf_err_message))
ENDIF
ENDIF
IF ( num_chem >= PARAM_FIRST_SCALAR ) THEN
IF ( config_flags%h_sca_adv_order <= 4 ) THEN
IF ( (config_flags%chem_adv_opt /= ORIGINAL .and. config_flags%chem_adv_opt /= WENO_SCALAR) .and. (rk_step == rk_order-1) ) THEN
# include "HALO_EM_CHEM_E_5.inc"
ELSE
# include "HALO_EM_CHEM_E_3.inc"
ENDIF
ELSE IF ( config_flags%h_sca_adv_order <= 6 ) THEN
IF ( (config_flags%chem_adv_opt /= ORIGINAL .and. config_flags%chem_adv_opt /= WENO_SCALAR) .and. (rk_step == rk_order-1) ) THEN
# include "HALO_EM_CHEM_E_7.inc"
ELSE
# include "HALO_EM_CHEM_E_5.inc"
ENDIF
ELSE
WRITE(wrf_err_message,*)'solve_em_tl: invalid h_sca_adv_order = ',config_flags%h_sca_adv_order
CALL wrf_error_fatal(TRIM(wrf_err_message))
ENDIF
ENDIF
IF ( num_tracer >= PARAM_FIRST_SCALAR ) THEN
IF ( config_flags%h_sca_adv_order <= 4 ) THEN
IF ( (config_flags%tracer_adv_opt /= ORIGINAL .and. config_flags%tracer_adv_opt /= WENO_SCALAR) .and. (rk_step == rk_order-1) ) THEN
# include "HALO_EM_TRACER_E_5_TL.inc"
ELSE
# include "HALO_EM_TRACER_E_3_TL.inc"
ENDIF
ELSE IF ( config_flags%h_sca_adv_order <= 6 ) THEN
IF ( (config_flags%tracer_adv_opt /= ORIGINAL .and. config_flags%tracer_adv_opt /= WENO_SCALAR) .and. (rk_step == rk_order-1) ) THEN
# include "HALO_EM_TRACER_E_7_TL.inc"
ELSE
# include "HALO_EM_TRACER_E_5_TL.inc"
ENDIF
ELSE
WRITE(wrf_err_message,*)'solve_em_tl: invalid h_sca_adv_order = ',config_flags%h_sca_adv_order
CALL wrf_error_fatal(TRIM(wrf_err_message))
ENDIF
ENDIF
IF ( num_scalar >= PARAM_FIRST_SCALAR ) THEN
IF ( config_flags%h_sca_adv_order <= 4 ) THEN
IF ( (config_flags%scalar_adv_opt /= ORIGINAL .and. config_flags%scalar_adv_opt /= WENO_SCALAR) .and. (rk_step == rk_order-1) ) THEN
# include "HALO_EM_SCALAR_E_5.inc"
ELSE
# include "HALO_EM_SCALAR_E_3.inc"
ENDIF
ELSE IF ( config_flags%h_sca_adv_order <= 6 ) THEN
IF ( (config_flags%scalar_adv_opt /= ORIGINAL .and. config_flags%scalar_adv_opt /= WENO_SCALAR) .and. (rk_step == rk_order-1) ) THEN
# include "HALO_EM_SCALAR_E_7.inc"
ELSE
# include "HALO_EM_SCALAR_E_5.inc"
ENDIF
ELSE
WRITE(wrf_err_message,*)'solve_em_tl: invalid h_sca_adv_order = ',config_flags%h_sca_adv_order
CALL wrf_error_fatal(TRIM(wrf_err_message))
ENDIF
ENDIF
#endif
ENDIF rk_step_1_check
!**********************************************************
!
! end of RK predictor-corrector loop
!
!**********************************************************
END DO Runge_Kutta_loop
IF (config_flags%do_avgflx_em .EQ. 1) THEN
! Reinitialize time-averaged fluxes if history output was written after the previous time step:
CALL WRFU_ALARMGET(grid%alarms( HISTORY_ALARM ),prevringtime=temp_time)
CALL domain_clock_get ( grid, current_time=CurrTime, &
current_timestr=message2 )
! use overloaded -, .LT. operator to check whether to initialize avgflx:
! reinitialize after each history output (detect this here by comparing current time
! against last history time and time step - this code follows what's done in adapt_timestep_em):
WRITE ( message , FMT = '("solve_em_tl: old_dt =",g15.6,", dt=",g15.6," on domain ",I3)' ) &
& old_dt,grid%dt,grid%id
CALL wrf_debug(200,message)
old_dt=min(old_dt,grid%dt)
num = INT(old_dt * precision)
den = precision
CALL WRFU_TimeIntervalSet(dtInterval, Sn=num, Sd=den)
IF (CurrTime .lt. temp_time + dtInterval) THEN
WRITE ( message , FMT = '("solve_em_tl: initializing avgflx at time ",A," on domain ",I3)' ) &
& TRIM(message2), grid%id
CALL wrf_message(trim(message))
grid%avgflx_count = 0
!tile-loop for zero_avgflx
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
CALL wrf_debug(200,'In solve_em_tl, before zero_avgflx call')
CALL zero_avgflx(grid%avgflx_rum,grid%avgflx_rvm,grid%avgflx_wwm, &
& ids, ide, jds, jde, kds, kde, &
& ims, ime, jms, jme, kms, kme, &
& grid%i_start(ij), grid%i_end(ij), grid%j_start(ij), grid%j_end(ij), &
& k_start , k_end, f_flux, &
& grid%avgflx_cfu1,grid%avgflx_cfd1,grid%avgflx_dfu1, &
& grid%avgflx_efu1,grid%avgflx_dfd1,grid%avgflx_efd1 )
CALL wrf_debug(200,'In solve_em_tl, after zero_avgflx call')
ENDDO
ENDIF
! Update avgflx quantities
!tile-loop for upd_avgflx
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
CALL wrf_debug(200,'In solve_em_tl, before upd_avgflx call')
CALL upd_avgflx(grid%avgflx_count,grid%avgflx_rum,grid%avgflx_rvm,grid%avgflx_wwm, &
& grid%ru_m, grid%rv_m, grid%ww_m, &
& ids, ide, jds, jde, kds, kde, &
& ims, ime, jms, jme, kms, kme, &
& grid%i_start(ij), grid%i_end(ij), grid%j_start(ij), grid%j_end(ij), &
& k_start , k_end, f_flux, &
& grid%cfu1,grid%cfd1,grid%dfu1,grid%efu1,grid%dfd1,grid%efd1, &
& grid%avgflx_cfu1,grid%avgflx_cfd1,grid%avgflx_dfu1, &
& grid%avgflx_efu1,grid%avgflx_dfd1,grid%avgflx_efd1 )
CALL wrf_debug(200,'In solve_em_tl, after upd_avgflx call')
ENDDO
grid%avgflx_count = grid%avgflx_count + 1
ENDIF
!
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
BENCH_START(g_advance_ppt_tim)
CALL wrf_debug ( 200 , ' call g_advance_ppt' )
CALL g_advance_ppt(grid%rthcuten,grid%g_rthcuten,grid%rqvcuten,grid%g_rqvcuten, &
grid%rqccuten,grid%g_rqccuten,grid%rqrcuten,grid%g_rqrcuten, &
grid%rqicuten,grid%g_rqicuten,grid%rqscuten,grid%g_rqscuten, &
grid%rainc,grid%g_rainc,grid%raincv,grid%rainsh,grid%g_rainsh,&
grid%pratec,grid%g_pratec,grid%pratesh,grid%g_pratesh, &
grid%nca,grid%g_nca,grid%htop,grid%g_htop,grid%hbot,grid%g_hbot,&
grid%cutop,grid%g_cutop,grid%cubot,grid%g_cubot, &
grid%cuppt, grid%g_cuppt, grid%dt, config_flags, &
ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
BENCH_END(g_advance_ppt_tim)
ENDDO
!$OMP END PARALLEL DO
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
CALL wrf_debug ( 200 , ' call g_phy_prep_part2' )
CALL g_phy_prep_part2 ( config_flags, &
grid%mut,grid%g_mut, grid%muu, grid%g_muu, grid%muv, grid%g_muv, &
grid%rthraten, grid%g_rthraten, &
grid%rthblten, grid%g_rthblten, &
grid%rublten, grid%g_rublten, grid%rvblten, grid%g_rvblten, &
grid%rqvblten, grid%g_rqvblten, grid%rqcblten, grid%g_rqcblten, grid%rqiblten, grid%g_rqiblten, &
grid%rucuten, grid%g_rucuten , grid%rvcuten, grid%g_rvcuten, grid%rthcuten, grid%g_rthcuten, &
grid%rqvcuten, grid%g_rqvcuten, grid%rqccuten, grid%g_rqccuten, grid%rqrcuten, grid%g_rqrcuten, &
grid%rqicuten, grid%g_rqicuten, grid%rqscuten, grid%g_rqscuten, &
grid%rushten, grid%g_rushten, grid%rvshten, grid%g_rvshten, grid%rthshten, grid%g_rthshten, &
grid%rqvshten, grid%g_rqvshten, grid%rqcshten, grid%g_rqcshten, grid%rqrshten, grid%g_rqrshten, &
grid%rqishten, grid%g_rqishten, grid%rqsshten, grid%g_rqsshten, grid%rqgshten, grid%g_rqgshten, &
grid%rthften, grid%g_rthften, grid%rqvften, grid%g_rqvften, &
grid%RUNDGDTEN, grid%g_RUNDGDTEN, grid%RVNDGDTEN, grid%g_RVNDGDTEN, grid%RTHNDGDTEN, grid%g_RTHNDGDTEN, &
grid%RPHNDGDTEN,grid%g_RPHNDGDTEN,grid%RQVNDGDTEN, grid%g_RQVNDGDTEN,grid%RMUNDGDTEN,&
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
ENDDO
!$OMP END PARALLEL DO
!<DESCRIPTION>
!<pre>
! (5) time-split physics.
!
! Microphysics are the only time split physics in the WRF model
! at this time. Split-physics begins with the calculation of
! needed diagnostic quantities (pressure, temperature, etc.)
! followed by a call to the microphysics driver,
! and finishes with a clean-up, storing off of a diabatic tendency
! from the moist physics, and a re-calulation of the diagnostic
! quantities pressure and density.
!</pre>
!</DESCRIPTION>
IF( config_flags%specified .or. config_flags%nested ) THEN
sz = grid%spec_zone
ELSE
sz = 0
ENDIF
IF (config_flags%mp_physics /= 0) then
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij, its, ite, jts, jte )
scalar_tile_loop_1a: DO ij = 1 , grid%num_tiles
IF ( config_flags%periodic_x ) THEN
its = max(grid%i_start(ij),ids)
ite = min(grid%i_end(ij),ide-1)
ELSE
its = max(grid%i_start(ij),ids+sz)
ite = min(grid%i_end(ij),ide-1-sz)
ENDIF
jts = max(grid%j_start(ij),jds+sz)
jte = min(grid%j_end(ij),jde-1-sz)
CALL wrf_debug ( 200 , ' call g_moist_physics_prep' )
BENCH_START(g_moist_physics_prep_tim)
CALL g_moist_physics_prep_em( grid%t_2,grid%g_t_2, grid%t_1, &
t0, grid%rho,grid%g_rho, &
grid%al,grid%g_al, grid%alb, &
grid%p,grid%g_p, p8w,g_p8w, &
p0, grid%pb, &
grid%ph_2,grid%g_ph_2, grid%phb, &
th_phy, g_th_phy, pi_phy, g_pi_phy, &
p_phy, g_p_phy, &
grid%z, grid%g_z, grid%z_at_w, grid%g_z_at_w, &
dz8w, g_dz8w, &
dtm, grid%h_diabatic, grid%g_h_diabatic, &
moist(ims,kms,jms,P_QV),g_moist(ims,kms,jms,P_QV), &
grid%qv_diabatic, grid%g_qv_diabatic, &
moist(ims,kms,jms,P_QC),g_moist(ims,kms,jms,P_QC), &
grid%qc_diabatic, grid%g_qc_diabatic, &
config_flags,grid%fnm, grid%fnp, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
its, ite, jts, jte, &
k_start , k_end )
BENCH_END(g_moist_physics_prep_tim)
END DO scalar_tile_loop_1a
!$OMP END PARALLEL DO
CALL wrf_debug ( 200 , ' call g_microphysics_driver' )
grid%g_sr = 0.
grid%sr = 0.
specified_bdy = config_flags%specified .OR. config_flags%nested
channel_bdy = config_flags%specified .AND. config_flags%periodic_x
BENCH_START(g_micro_driver_tim)
!
! WRFU_AlarmIsRinging always returned false, so using an alternate method to find out if it is time
! to dump history/restart files so microphysics can be told to calculate things like radar reflectivity.
!
! diagflag = .false.
! CALL WRFU_ALARMGET(grid%alarms( HISTORY_ALARM
! ),prevringtime=temp_time,RingInterval=intervaltime)
! CALL WRFU_ALARMGET(grid%alarms( RESTART_ALARM
! ),prevringtime=restart_time,RingInterval=restartinterval)
! CALL domain_clock_get ( grid, current_time=CurrTime )
! old_dt=min(old_dt,grid%dt)
! num = INT(old_dt * precision)
! den = precision
! CALL WRFU_TimeIntervalSet(dtInterval, Sn=num, Sd=den)
! IF (CurrTime .ge. temp_time + intervaltime - dtInterval .or. &
! CurrTime .ge. restart_time + restartinterval - dtInterval ) THEN
! diagflag = .true.
! ENDIF
! WRITE(wrf_err_message,*)'diag_flag=',diag_flag
! CALL wrf_debug ( 0 , wrf_err_message )
#ifdef DM_PARALLEL
# include "HALO_EM_SBM_TL.inc"
#endif
CALL g_microphysics_driver( &
& DT=dtm ,DX=grid%dx ,DY=grid%dy &
& ,DZ8W=dz8w ,DZ8WD=g_dz8w, F_ICE_PHY=grid%f_ice_phy &
& ,ITIMESTEP=grid%itimestep ,LOWLYR=grid%lowlyr &
& ,P8W=p8w ,P=p_phy ,PD=g_p_phy &
& ,PI_PHY=pi_phy,PI_PHYD=g_pi_phy &
& ,RHO=grid%rho ,RHOD=grid%g_rho, SPEC_ZONE=grid%spec_zone &
& ,SR=grid%sr ,TH=th_phy,THD=g_th_phy &
& ,refl_10cm=grid%refl_10cm & ! hm, 9/22/09 for refl
& ,WARM_RAIN=grid%warm_rain &
& ,T8W=t8w &
& ,CLDFRA=grid%cldfra, EXCH_H=grid%exch_h &
& ,NSOURCE=grid%qndropsource &
& ,XLAND=grid%xland &
& ,SPECIFIED=specified_bdy, CHANNEL_SWITCH=channel_bdy &
& ,F_RAIN_PHY=grid%f_rain_phy &
& ,F_RIMEF_PHY=grid%f_rimef_phy &
& ,MP_PHYSICS=config_flags%mp_physics &
& ,ID=grid%id &
& ,IDS=ids,IDE=ide, JDS=jds,JDE=jde, KDS=kds,KDE=kde &
& ,IMS=ims,IME=ime, JMS=jms,JME=jme, KMS=kms,KME=kme &
& ,IPS=ips,IPE=ipe, JPS=jps,JPE=jpe, KPS=kps,KPE=kpe &
& ,I_START=grid%i_start,I_END=min(grid%i_end, ide-1) &
& ,J_START=grid%j_start,J_END=min(grid%j_end, jde-1) &
& ,KTS=k_start, KTE=min(k_end,kde-1) &
& ,NUM_TILES=grid%num_tiles &
& ,NAER=grid%naer &
! Optional
& , RAINNC=grid%rainnc, RAINNCV=grid%rainncv &
& , RAINNCD=grid%g_rainnc, RAINNCVD=grid%g_rainncv &
& , SNOWNC=grid%snownc, SNOWNCV=grid%snowncv &
& , GRAUPELNC=grid%graupelnc, GRAUPELNCV=grid%graupelncv & ! for milbrandt2mom
& , HAILNC=grid%hailnc, HAILNCV=grid%hailncv &
& , W=grid%w_2, Z=grid%z, HT=grid%ht &
& , MP_RESTART_STATE=grid%mp_restart_state &
& , TBPVS_STATE=grid%tbpvs_state & ! etampnew
& , TBPVS0_STATE=grid%tbpvs0_state & ! etampnew
& , QV_CURR=moist(ims,kms,jms,P_QV),QV_CURRD=g_moist(ims,kms,jms,P_QV), F_QV=F_QV &
& , QC_CURR=moist(ims,kms,jms,P_QC),QC_CURRD=g_moist(ims,kms,jms,P_QC), F_QC=F_QC &
& , QR_CURR=moist(ims,kms,jms,P_QR),QR_CURRD=g_moist(ims,kms,jms,P_QR), F_QR=F_QR &
& , QI_CURR=moist(ims,kms,jms,P_QI), F_QI=F_QI &
& , QS_CURR=moist(ims,kms,jms,P_QS), F_QS=F_QS &
& , QG_CURR=moist(ims,kms,jms,P_QG), F_QG=F_QG &
& , QH_CURR=moist(ims,kms,jms,P_QH), F_QH=F_QH & ! for milbrandt2mom
& , QNDROP_CURR=scalar(ims,kms,jms,P_QNDROP), F_QNDROP=F_QNDROP &
#if (WRF_CHEM==1)
& , RAINPROD=grid%rainprod, EVAPPROD=grid%evapprod &
& , QV_B4MP=grid%qv_b4mp,QC_B4MP=grid%qc_b4mp &
& , QI_B4MP=grid%qi_b4mp, QS_B4MP=grid%qs_b4mp &
#endif
& , QT_CURR=scalar(ims,kms,jms,P_QT), F_QT=F_QT &
& , QNN_CURR=scalar(ims,kms,jms,P_QNN), F_QNN=F_QNN &
& , QNI_CURR=scalar(ims,kms,jms,P_QNI), F_QNI=F_QNI &
& , QNC_CURR=scalar(ims,kms,jms,P_QNC), F_QNC=F_QNC &
& , QNR_CURR=scalar(ims,kms,jms,P_QNR), F_QNR=F_QNR &
& , QNS_CURR=scalar(ims,kms,jms,P_QNS), F_QNS=F_QNS &
& , QNG_CURR=scalar(ims,kms,jms,P_QNG), F_QNG=F_QNG &
& , QNH_CURR=scalar(ims,kms,jms,P_QNH), F_QNH=F_QNH & ! for milbrandt2mom and nssl_2mom
! & , QZR_CURR=scalar(ims,kms,jms,P_QZR), F_QZR=F_QZR & ! for milbrandt3mom
! & , QZI_CURR=scalar(ims,kms,jms,P_QZI), F_QZI=F_QZI & ! "
! & , QZS_CURR=scalar(ims,kms,jms,P_QZS), F_QZS=F_QZS & ! "
! & , QZG_CURR=scalar(ims,kms,jms,P_QZG), F_QZG=F_QZG & ! "
! & , QZH_CURR=scalar(ims,kms,jms,P_QZH), F_QZH=F_QZH & ! "
& , QVOLG_CURR=scalar(ims,kms,jms,P_QVOLG), F_QVOLG=F_QVOLG & ! for nssl_2mom
& , QVOLH_CURR=scalar(ims,kms,jms,P_QVOLH), F_QVOLH=F_QVOLH & ! for nssl_2mom
& , qrcuten=grid%rqrcuten, qscuten=grid%rqscuten &
& , qicuten=grid%rqicuten &
& , HAIL=config_flags%gsfcgce_hail & ! for gsfcgce
& , ICE2=config_flags%gsfcgce_2ice & ! for gsfcgce
! & , ccntype=config_flags%milbrandt_ccntype & ! for milbrandt (2mom)
! YLIN
! RI_CURR INPUT
& , RI_CURR=grid%rimi &
& , diagflag=diag_flag, do_radar_ref=config_flags%do_radar_ref &
)
BENCH_END(g_micro_driver_tim)
#if 0
BENCH_START(g_microswap_2)
! for load balancing; communication to redistribute the points
IF ( config_flags%mp_physics .EQ. ETAMPNEW .OR. &
& config_flags%mp_physics .EQ. FER_MP_HIRES) THEN
#include "SWAP_ETAMP_NEW.inc"
ELSE IF ( config_flags%mp_physics .EQ. WSM3SCHEME ) THEN
#include "SWAP_WSM3.inc"
ENDIF
BENCH_END(g_microswap_2)
#endif
CALL wrf_debug ( 200 , ' call g_moist_physics_finish' )
BENCH_START(g_moist_phys_end_tim)
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij, its, ite, jts, jte, im, ii, jj, kk )
DO ij = 1 , grid%num_tiles
its = max(grid%i_start(ij),ids)
ite = min(grid%i_end(ij),ide-1)
jts = max(grid%j_start(ij),jds)
jte = min(grid%j_end(ij),jde-1)
CALL g_microphysics_zero_outb ( &
moist , g_moist, num_moist , config_flags , &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
its, ite, jts, jte, &
k_start , k_end )
CALL g_microphysics_zero_outb ( &
scalar , g_scalar, num_scalar , config_flags , &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
its, ite, jts, jte, &
k_start , k_end )
!!!!! REPLACE WITH g_microphysics_zero_outb WHEN CODING TL OF PHYSICS. Ning Pan
CALL microphysics_zero_outb ( &
chem , num_chem , config_flags , &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
its, ite, jts, jte, &
k_start , k_end )
CALL g_microphysics_zero_outb ( &
tracer , g_tracer, num_tracer , config_flags , &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
its, ite, jts, jte, &
k_start , k_end )
IF ( config_flags%periodic_x ) THEN
its = max(grid%i_start(ij),ids)
ite = min(grid%i_end(ij),ide-1)
ELSE
its = max(grid%i_start(ij),ids+sz)
ite = min(grid%i_end(ij),ide-1-sz)
ENDIF
jts = max(grid%j_start(ij),jds+sz)
jte = min(grid%j_end(ij),jde-1-sz)
CALL g_microphysics_zero_outa ( &
moist , g_moist, num_moist , config_flags , &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
its, ite, jts, jte, &
k_start , k_end )
CALL g_microphysics_zero_outa ( &
scalar ,g_scalar, num_scalar , config_flags , &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
its, ite, jts, jte, &
k_start , k_end )
!!!!! REPLACE WITH g_microphysics_zero_outa WHEN CODING TL OF PHYSICS. Ning Pan
CALL microphysics_zero_outa ( &
chem , num_chem , config_flags , &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
its, ite, jts, jte, &
k_start , k_end )
CALL g_microphysics_zero_outa ( &
tracer , g_tracer, num_tracer , config_flags , &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
its, ite, jts, jte, &
k_start , k_end )
CALL g_moist_physics_finish_em( grid%t_2, grid%g_t_2, grid%t_1, &
t0, grid%muts, &
th_phy, g_th_phy, &
grid%h_diabatic,grid%g_h_diabatic, &
moist(ims,kms,jms,P_QV),g_moist(ims,kms,jms,P_QV), &
grid%qv_diabatic, grid%g_qv_diabatic, &
moist(ims,kms,jms,P_QC),g_moist(ims,kms,jms,P_QC), &
grid%qc_diabatic, grid%g_qc_diabatic, &
dtm, config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
its, ite, jts, jte, &
k_start , k_end )
END DO
!$OMP END PARALLEL DO
ENDIF ! microphysics test
!-----------------------------------------------------------
! filter for moist variables post-microphysics and end of timestep
!-----------------------------------------------------------
IF (config_flags%polar) THEN
IF ( num_3d_m >= PARAM_FIRST_SCALAR ) THEN
CALL wrf_debug ( 200 , ' call filter moist' )
DO im = PARAM_FIRST_SCALAR, num_3d_m
IF ( config_flags%coupled_filtering ) THEN
DO jj = jps, MIN(jpe,jde-1)
DO kk = kps, MIN(kpe,kde-1)
DO ii = ips, MIN(ipe,ide-1)
moist(ii,kk,jj,im)=moist(ii,kk,jj,im)*(grid%mu_2(ii,jj)+grid%mub(ii,jj))
ENDDO
ENDDO
ENDDO
END IF
CALL pxft ( grid=grid &
,lineno=__LINE__ &
,flag_uv = 0 &
,flag_rurv = 0 &
,flag_wph = 0 &
,flag_ww = 0 &
,flag_t = 0 &
,flag_mu = 0 &
,flag_mut = 0 &
,flag_moist = im &
,flag_chem = 0 &
,flag_tracer = 0 &
,flag_scalar = 0 &
,actual_distance_average=config_flags%actual_distance_average&
,pos_def = config_flags%pos_def &
,swap_pole_with_next_j = config_flags%swap_pole_with_next_j &
,moist=moist,chem=chem,tracer=tracer,scalar=scalar &
,fft_filter_lat = config_flags%fft_filter_lat &
,dclat = dclat &
,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde &
,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme &
,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe &
,imsx=imsx,imex=imex,jmsx=jmsx,jmex=jmex,kmsx=kmsx,kmex=kmex &
,ipsx=ipsx,ipex=ipex,jpsx=jmsx,jpex=jpex,kpsx=kpsx,kpex=kpex )
IF ( config_flags%coupled_filtering ) THEN
DO jj = jps, MIN(jpe,jde-1)
DO kk = kps, MIN(kpe,kde-1)
DO ii = ips, MIN(ipe,ide-1)
moist(ii,kk,jj,im)=moist(ii,kk,jj,im)/(grid%mu_2(ii,jj)+grid%mub(ii,jj))
ENDDO
ENDDO
ENDDO
ENDIF
ENDDO
ENDIF
ENDIF
!-----------------------------------------------------------
! end filter for moist variables post-microphysics and end of timestep
!-----------------------------------------------------------
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij, its, ite, jts, jte, im, ii, jj, kk )
scalar_tile_loop_1ba: DO ij = 1 , grid%num_tiles
IF ( config_flags%periodic_x ) THEN
its = max(grid%i_start(ij),ids)
ite = min(grid%i_end(ij),ide-1)
ELSE
its = max(grid%i_start(ij),ids+sz)
ite = min(grid%i_end(ij),ide-1-sz)
ENDIF
jts = max(grid%j_start(ij),jds+sz)
jte = min(grid%j_end(ij),jde-1-sz)
CALL g_calc_p_rho_phi( moist,g_moist, num_3d_m, config_flags%hypsometric_opt, &
grid%al,grid%g_al, grid%alb, grid%mu_2,grid%g_mu_2, grid%muts,grid%g_muts, &
grid%ph_2,grid%g_ph_2, grid%phb, grid%p,grid%g_p, grid%pb, grid%t_2,grid%g_t_2, &
p0, t0, grid%p_top, grid%znu, grid%znw, grid%dnw, grid%rdnw, &
grid%rdn, config_flags%non_hydrostatic, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
its, ite, jts, jte, &
k_start , k_end )
END DO scalar_tile_loop_1ba
!$OMP END PARALLEL DO
BENCH_END(g_moist_phys_end_tim)
IF (.not. config_flags%non_hydrostatic) THEN
#ifdef DM_PARALLEL
# include "HALO_EM_HYDRO_UV_TL.inc"
# include "PERIOD_EM_HYDRO_UV.inc"
#endif
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
CALL g_diagnose_w( ph_tend,g_ph_tend, grid%ph_2,grid%g_ph_2, grid%ph_1,grid%g_ph_1, &
grid%w_2,grid%g_w_2, grid%muts,grid%g_muts, dt_rk, &
grid%u_2,grid%g_u_2, grid%v_2,grid%g_v_2, grid%ht, &
grid%cf1, grid%cf2, grid%cf3, grid%rdx, grid%rdy, grid%msftx, grid%msfty, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
END DO
!$OMP END PARALLEL DO
END IF
CALL wrf_debug ( 200 , ' call chem polar filter ' )
!-----------------------------------------------------------
! filter for chem and scalar variables at end of timestep
!-----------------------------------------------------------
IF (config_flags%polar) THEN
IF ( num_3d_c >= PARAM_FIRST_SCALAR ) then
chem_filter_loop: DO im = PARAM_FIRST_SCALAR, num_3d_c
IF ( config_flags%coupled_filtering ) THEN
DO jj = jps, MIN(jpe,jde-1)
DO kk = kps, MIN(kpe,kde-1)
DO ii = ips, MIN(ipe,ide-1)
chem(ii,kk,jj,im)=chem(ii,kk,jj,im)*(grid%mu_2(ii,jj)+grid%mub(ii,jj))
ENDDO
ENDDO
ENDDO
END IF
CALL pxft ( grid=grid &
,lineno=__LINE__ &
,flag_uv = 0 &
,flag_rurv = 0 &
,flag_wph = 0 &
,flag_ww = 0 &
,flag_t = 0 &
,flag_mu = 0 &
,flag_mut = 0 &
,flag_moist = 0 &
,flag_chem = im &
,flag_tracer = 0 &
,flag_scalar = 0 &
,actual_distance_average=config_flags%actual_distance_average&
,pos_def = config_flags%pos_def &
,swap_pole_with_next_j = config_flags%swap_pole_with_next_j &
,moist=moist,chem=chem,tracer=tracer,scalar=scalar &
,fft_filter_lat = config_flags%fft_filter_lat &
,dclat = dclat &
,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde &
,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme &
,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe &
,imsx=imsx,imex=imex,jmsx=jmsx,jmex=jmex,kmsx=kmsx,kmex=kmex &
,ipsx=ipsx,ipex=ipex,jpsx=jmsx,jpex=jpex,kpsx=kpsx,kpex=kpex )
IF ( config_flags%coupled_filtering ) THEN
DO jj = jps, MIN(jpe,jde-1)
DO kk = kps, MIN(kpe,kde-1)
DO ii = ips, MIN(ipe,ide-1)
chem(ii,kk,jj,im)=chem(ii,kk,jj,im)/(grid%mu_2(ii,jj)+grid%mub(ii,jj))
ENDDO
ENDDO
ENDDO
END IF
ENDDO chem_filter_loop
ENDIF
IF ( num_tracer >= PARAM_FIRST_SCALAR ) then
tracer_filter_loop: DO im = PARAM_FIRST_SCALAR, num_tracer
IF ( config_flags%coupled_filtering ) THEN
DO jj = jps, MIN(jpe,jde-1)
DO kk = kps, MIN(kpe,kde-1)
DO ii = ips, MIN(ipe,ide-1)
tracer(ii,kk,jj,im)=tracer(ii,kk,jj,im)*(grid%mu_2(ii,jj)+grid%mub(ii,jj))
ENDDO
ENDDO
ENDDO
END IF
CALL pxft ( grid=grid &
,lineno=__LINE__ &
,flag_uv = 0 &
,flag_rurv = 0 &
,flag_wph = 0 &
,flag_ww = 0 &
,flag_t = 0 &
,flag_mu = 0 &
,flag_mut = 0 &
,flag_moist = 0 &
,flag_chem = 0 &
,flag_tracer = im &
,flag_scalar = 0 &
,actual_distance_average=config_flags%actual_distance_average&
,pos_def = config_flags%pos_def &
,swap_pole_with_next_j = config_flags%swap_pole_with_next_j &
,moist=moist,chem=chem,tracer=tracer,scalar=scalar &
,fft_filter_lat = config_flags%fft_filter_lat &
,dclat = dclat &
,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde &
,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme &
,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe &
,imsx=imsx,imex=imex,jmsx=jmsx,jmex=jmex,kmsx=kmsx,kmex=kmex &
,ipsx=ipsx,ipex=ipex,jpsx=jmsx,jpex=jpex,kpsx=kpsx,kpex=kpex )
IF ( config_flags%coupled_filtering ) THEN
DO jj = jps, MIN(jpe,jde-1)
DO kk = kps, MIN(kpe,kde-1)
DO ii = ips, MIN(ipe,ide-1)
tracer(ii,kk,jj,im)=tracer(ii,kk,jj,im)/(grid%mu_2(ii,jj)+grid%mub(ii,jj))
ENDDO
ENDDO
ENDDO
END IF
ENDDO tracer_filter_loop
ENDIF
IF ( num_3d_s >= PARAM_FIRST_SCALAR ) then
scalar_filter_loop: DO im = PARAM_FIRST_SCALAR, num_3d_s
IF ( config_flags%coupled_filtering ) THEN
DO jj = jps, MIN(jpe,jde-1)
DO kk = kps, MIN(kpe,kde-1)
DO ii = ips, MIN(ipe,ide-1)
scalar(ii,kk,jj,im)=scalar(ii,kk,jj,im)*(grid%mu_2(ii,jj)+grid%mub(ii,jj))
ENDDO
ENDDO
ENDDO
END IF
CALL pxft ( grid=grid &
,lineno=__LINE__ &
,flag_uv = 0 &
,flag_rurv = 0 &
,flag_wph = 0 &
,flag_ww = 0 &
,flag_t = 0 &
,flag_mu = 0 &
,flag_mut = 0 &
,flag_moist = 0 &
,flag_chem = 0 &
,flag_tracer = 0 &
,flag_scalar = im &
,actual_distance_average=config_flags%actual_distance_average&
,pos_def = config_flags%pos_def &
,swap_pole_with_next_j = config_flags%swap_pole_with_next_j &
,moist=moist,chem=chem,tracer=tracer,scalar=scalar &
,fft_filter_lat = config_flags%fft_filter_lat &
,dclat = dclat &
,ids=ids,ide=ide,jds=jds,jde=jde,kds=kds,kde=kde &
,ims=ims,ime=ime,jms=jms,jme=jme,kms=kms,kme=kme &
,ips=ips,ipe=ipe,jps=jps,jpe=jpe,kps=kps,kpe=kpe &
,imsx=imsx,imex=imex,jmsx=jmsx,jmex=jmex,kmsx=kmsx,kmex=kmex &
,ipsx=ipsx,ipex=ipex,jpsx=jmsx,jpex=jpex,kpsx=kpsx,kpex=kpex )
IF ( config_flags%coupled_filtering ) THEN
DO jj = jps, MIN(jpe,jde-1)
DO kk = kps, MIN(kpe,kde-1)
DO ii = ips, MIN(ipe,ide-1)
scalar(ii,kk,jj,im)=scalar(ii,kk,jj,im)/(grid%mu_2(ii,jj)+grid%mub(ii,jj))
ENDDO
ENDDO
ENDDO
END IF
ENDDO scalar_filter_loop
ENDIF
ENDIF
!-----------------------------------------------------------
! end filter for chem and scalar variables at end of timestep
!-----------------------------------------------------------
! We're finished except for boundary condition (and patch) update
! Boundary condition time (or communication time). At this time, we have
! implemented periodic and symmetric physical boundary conditions.
! b.c. routine for data within patch.
! we need to do both time levels of
! data because the time filter only works in the physical solution space.
! First, do patch communications for boundary conditions (periodicity)
!-----------------------------------------------------------
! Stencils for patch communications (WCS, 29 June 2001)
!
! here's where we need a wide comm stencil - these are the
! uncoupled variables so are used for high order calc in
! advection and mixong routines.
!
! * * * * *
! * * * * * * * * *
! * + * * + * * * + * *
! * * * * * * * * *
! * * * * *
!
! grid%u_1 x
! grid%u_2 x
! grid%v_1 x
! grid%v_2 x
! grid%w_1 x
! grid%w_2 x
! grid%t_1 x
! grid%t_2 x
! grid%ph_1 x
! grid%ph_2 x
! grid%tke_1 x
! grid%tke_2 x
!
! 2D variables
! grid%mu_1 x
! grid%mu_2 x
!
! 4D variables
! moist x
! chem x
! scalar x
!----------------------------------------------------------
#ifdef DM_PARALLEL
IF ( config_flags%h_mom_adv_order <= 4 ) THEN
# include "HALO_EM_D3_3_TL.inc"
ELSE IF ( config_flags%h_mom_adv_order <= 6 ) THEN
# include "HALO_EM_D3_5_TL.inc"
ELSE
WRITE(wrf_err_message,*)'solve_em_tl: invalid h_mom_adv_order = ',config_flags%h_mom_adv_order
CALL wrf_error_fatal(TRIM(wrf_err_message))
ENDIF
# include "PERIOD_BDY_EM_D3.inc"
# include "PERIOD_BDY_EM_MOIST.inc"
# include "PERIOD_BDY_EM_CHEM.inc"
# include "PERIOD_BDY_EM_TRACER.inc"
# include "PERIOD_BDY_EM_SCALAR.inc"
# include "PERIOD_BDY_EM_TKE.inc"
#endif
! now set physical b.c on a patch
BENCH_START(g_bc_2d_tim)
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
tile_bc_loop_2: DO ij = 1 , grid%num_tiles
CALL wrf_debug ( 200 , ' call g_set_phys_bc_dry_2' )
CALL g_set_phys_bc_dry_2( config_flags, &
grid%u_1,grid%g_u_1, grid%u_2,grid%g_u_2, &
grid%v_1,grid%g_v_1, grid%v_2,grid%g_v_2, &
grid%w_1,grid%g_w_1, grid%w_2,grid%g_w_2, &
grid%t_1,grid%g_t_1, grid%t_2,grid%g_t_2, &
grid%ph_1,grid%g_ph_1, grid%ph_2,grid%g_ph_2, &
grid%mu_1,grid%g_mu_1, grid%mu_2,grid%g_mu_2, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
CALL g_set_physical_bc3d( grid%tke_1,grid%g_tke_1, 'p', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end-1 )
CALL g_set_physical_bc3d( grid%tke_2 ,grid%g_tke_2, 'p', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
moisture_loop_bdy_2 : DO im = PARAM_FIRST_SCALAR , num_3d_m
CALL g_set_physical_bc3d( moist(ims,kms,jms,im),g_moist(ims,kms,jms,im), 'p', &
config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
END DO moisture_loop_bdy_2
chem_species_bdy_loop_2 : DO ic = PARAM_FIRST_SCALAR , num_3d_c
!!!!! REPLACE WITH g_set_physical_bc3d WHEN chem IS NEEDED. Ning Pan
CALL set_physical_bc3d( chem(ims,kms,jms,ic) , 'p', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
END DO chem_species_bdy_loop_2
tracer_species_bdy_loop_2 : DO ic = PARAM_FIRST_SCALAR , num_tracer
CALL g_set_physical_bc3d( tracer(ims,kms,jms,ic) , g_tracer(ims,kms,jms,ic), 'p', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
END DO tracer_species_bdy_loop_2
scalar_species_bdy_loop_2 : DO is = PARAM_FIRST_SCALAR , num_3d_s
CALL g_set_physical_bc3d( scalar(ims,kms,jms,is) ,g_scalar(ims,kms,jms,is) , 'p', config_flags, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
END DO scalar_species_bdy_loop_2
END DO tile_bc_loop_2
!$OMP END PARALLEL DO
BENCH_END(g_bc_2d_tim)
IF( config_flags%specified .or. config_flags%nested ) THEN
! this code forces boundary values to specified values to avoid drift
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
tile_bc_loop_3: DO ij = 1 , grid%num_tiles
CALL wrf_debug ( 200 , ' call g_spec_bdy_final' )
CALL g_spec_bdy_final ( grid%u_2, grid%g_u_2, grid%muus, grid%g_muus, grid%msfuy, &
grid%u_bxs, grid%g_u_bxs, grid%u_bxe, grid%g_u_bxe, &
grid%u_bys, grid%g_u_bys, grid%u_bye, grid%g_u_bye, &
grid%u_btxs,grid%g_u_btxs,grid%u_btxe,grid%g_u_btxe, &
grid%u_btys,grid%g_u_btys,grid%u_btye,grid%g_u_btye, &
'u', config_flags, &
config_flags%spec_bdy_width, grid%spec_zone, &
grid%dtbc, &
ids,ide, jds,jde, kds,kde, & ! domain dims
ims,ime, jms,jme, kms,kme, & ! memory dims
ips,ipe, jps,jpe, kps,kpe, & ! patch dims
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
CALL g_spec_bdy_final ( grid%v_2, grid%g_v_2, grid%muvs, grid%g_muvs, grid%msfvx, &
grid%v_bxs, grid%g_v_bxs, grid%v_bxe, grid%g_v_bxe, &
grid%v_bys, grid%g_v_bys, grid%v_bye, grid%g_v_bye, &
grid%v_btxs,grid%g_v_btxs,grid%v_btxe,grid%g_v_btxe, &
grid%v_btys,grid%g_v_btys,grid%v_btye,grid%g_v_btye, &
'v', config_flags, &
config_flags%spec_bdy_width, grid%spec_zone, &
grid%dtbc, &
ids,ide, jds,jde, kds,kde, & ! domain dims
ims,ime, jms,jme, kms,kme, & ! memory dims
ips,ipe, jps,jpe, kps,kpe, & ! patch dims
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
IF( config_flags%nested) THEN
CALL g_spec_bdy_final ( grid%w_2, grid%g_w_2, grid%muts, grid%g_muts, grid%msfty, &
grid%w_bxs, grid%g_w_bxs, grid%w_bxe, grid%g_w_bxe, &
grid%w_bys, grid%g_w_bys, grid%w_bye, grid%g_w_bye, &
grid%w_btxs,grid%g_w_btxs,grid%w_btxe,grid%g_w_btxe, &
grid%w_btys,grid%g_w_btys,grid%w_btye,grid%g_w_btye, &
'w', config_flags, &
config_flags%spec_bdy_width, grid%spec_zone, &
grid%dtbc, &
ids,ide, jds,jde, kds,kde, & ! domain dims
ims,ime, jms,jme, kms,kme, & ! memory dims
ips,ipe, jps,jpe, kps,kpe, & ! patch dims
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
ENDIF
CALL g_spec_bdy_final ( grid%t_2, grid%g_t_2, grid%muts, grid%g_muts, grid%msfty, &
grid%t_bxs, grid%g_t_bxs, grid%t_bxe, grid%g_t_bxe, &
grid%t_bys, grid%g_t_bys, grid%t_bye, grid%g_t_bye, &
grid%t_btxs,grid%g_t_btxs,grid%t_btxe,grid%g_t_btxe, &
grid%t_btys,grid%g_t_btys,grid%t_btye,grid%g_t_btye, &
't', config_flags, &
config_flags%spec_bdy_width, grid%spec_zone, &
grid%dtbc, &
ids,ide, jds,jde, kds,kde, & ! domain dims
ims,ime, jms,jme, kms,kme, & ! memory dims
ips,ipe, jps,jpe, kps,kpe, & ! patch dims
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
CALL g_spec_bdy_final ( grid%ph_2, grid%g_ph_2, grid%muts, grid%g_muts, grid%msfty, &
grid%ph_bxs, grid%g_ph_bxs, grid%ph_bxe, grid%g_ph_bxe, &
grid%ph_bys, grid%g_ph_bys, grid%ph_bye, grid%g_ph_bye, &
grid%ph_btxs,grid%g_ph_btxs,grid%ph_btxe,grid%g_ph_btxe, &
grid%ph_btys,grid%g_ph_btys,grid%ph_btye,grid%g_ph_btye, &
'h', config_flags, &
config_flags%spec_bdy_width, grid%spec_zone, &
grid%dtbc, &
ids,ide, jds,jde, kds,kde, & ! domain dims
ims,ime, jms,jme, kms,kme, & ! memory dims
ips,ipe, jps,jpe, kps,kpe, & ! patch dims
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
IF( config_flags%spec_bdy_final_mu .EQ. 1 ) THEN
CALL g_spec_bdy_final ( grid%mu_2, grid%g_mu_2, grid%muts, grid%g_muts, grid%msfty, &
grid%mu_bxs, grid%g_mu_bxs, grid%mu_bxe, grid%g_mu_bxe, &
grid%mu_bys, grid%g_mu_bys, grid%mu_bye, grid%g_mu_bye, &
grid%mu_btxs,grid%g_mu_btxs,grid%mu_btxe,grid%g_mu_btxe, &
grid%mu_btys,grid%g_mu_btys,grid%mu_btye,grid%g_mu_btye, &
'm', config_flags, &
config_flags%spec_bdy_width, grid%spec_zone, &
grid%dtbc, &
ids,ide, jds,jde, 1, 1, & ! domain dims
ims,ime, jms,jme, 1, 1, & ! memory dims
ips,ipe, jps,jpe, 1, 1, & ! patch dims
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
1 , 1 )
ENDIF
moisture_loop_bdy_3 : DO im = PARAM_FIRST_SCALAR , num_3d_m
IF ( im .EQ. P_QV .OR. config_flags%nested .OR. &
( config_flags%specified .AND. config_flags%have_bcs_moist ) ) THEN
CALL g_spec_bdy_final ( moist(ims,kms,jms,im), g_moist(ims,kms,jms,im), &
grid%muts, grid%g_muts, grid%msfty, &
moist_bxs(jms,kms,1,im), g_moist_bxs(jms,kms,1,im), &
moist_bxe(jms,kms,1,im), g_moist_bxe(jms,kms,1,im), &
moist_bys(ims,kms,1,im), g_moist_bys(ims,kms,1,im), &
moist_bye(ims,kms,1,im), g_moist_bye(ims,kms,1,im), &
moist_btxs(jms,kms,1,im), g_moist_btxs(jms,kms,1,im), &
moist_btxe(jms,kms,1,im), g_moist_btxe(jms,kms,1,im), &
moist_btys(ims,kms,1,im), g_moist_btys(ims,kms,1,im), &
moist_btye(ims,kms,1,im), g_moist_btye(ims,kms,1,im), &
't', config_flags, &
config_flags%spec_bdy_width, grid%spec_zone, &
grid%dtbc, &
ids,ide, jds,jde, kds,kde, & ! domain dims
ims,ime, jms,jme, kms,kme, & ! memory dims
ips,ipe, jps,jpe, kps,kpe, & ! patch dims
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
ENDIF
END DO moisture_loop_bdy_3
#if (WRF_CHEM == 1)
IF (num_3d_c >= PARAM_FIRST_SCALAR) THEN
chem_species_bdy_loop_3 : DO ic = PARAM_FIRST_SCALAR , num_3d_c
IF( ( config_flags%nested ) ) THEN
! CALL g_spec_bdy_final ( chem(ims,kms,jms,ic), g_chem(ims,kms,jms,ic), &
! grid%muts, grid%g_muts, grid%msfty, &
! chem_bxs(jms,kms,1,ic), g_chem_bxs(jms,kms,1,ic), &
! chem_bxe(jms,kms,1,ic), g_chem_bxe(jms,kms,1,ic), &
! chem_bys(ims,kms,1,ic), g_chem_bys(ims,kms,1,ic), &
! chem_bye(ims,kms,1,ic), g_chem_bye(ims,kms,1,ic), &
! chem_btxs(jms,kms,1,ic), g_chem_btxs(jms,kms,1,ic), &
! chem_btxe(jms,kms,1,ic), g_chem_btxe(jms,kms,1,ic), &
! chem_btys(ims,kms,1,ic), g_chem_btys(ims,kms,1,ic), &
! chem_btye(ims,kms,1,ic), g_chem_btye(ims,kms,1,ic), &
!hcl-beg no g_chem for now
CALL g_spec_bdy_final ( chem(ims,kms,jms,ic), chem(ims,kms,jms,ic), &
grid%muts, grid%g_muts, grid%msfty, &
chem_bxs(jms,kms,1,ic), chem_bxs(jms,kms,1,ic), &
chem_bxe(jms,kms,1,ic), chem_bxe(jms,kms,1,ic), &
chem_bys(ims,kms,1,ic), chem_bys(ims,kms,1,ic), &
chem_bye(ims,kms,1,ic), chem_bye(ims,kms,1,ic), &
chem_btxs(jms,kms,1,ic), chem_btxs(jms,kms,1,ic), &
chem_btxe(jms,kms,1,ic), chem_btxe(jms,kms,1,ic), &
chem_btys(ims,kms,1,ic), chem_btys(ims,kms,1,ic), &
chem_btye(ims,kms,1,ic), chem_btye(ims,kms,1,ic), &
!hcl-end no g_chem for now
't', config_flags, &
config_flags%spec_bdy_width, grid%spec_zone, &
grid%dtbc, &
ids,ide, jds,jde, kds,kde, & ! domain dims
ims,ime, jms,jme, kms,kme, & ! memory dims
ips,ipe, jps,jpe, kps,kpe, & ! patch dims
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
ENDIF
END DO chem_species_bdy_loop_3
ENDIF
#endif
tracer_species_bdy_loop_3 : DO im = PARAM_FIRST_SCALAR , num_tracer
IF( ( config_flags%nested ) ) THEN
CALL g_spec_bdy_final ( tracer(ims,kms,jms,im), g_tracer(ims,kms,jms,im), &
grid%muts, grid%g_muts, grid%msfty, &
tracer_bxs(jms,kms,1,im), g_tracer_bxs(jms,kms,1,im), &
tracer_bxe(jms,kms,1,im), g_tracer_bxe(jms,kms,1,im), &
tracer_bys(ims,kms,1,im), g_tracer_bys(ims,kms,1,im), &
tracer_bye(ims,kms,1,im), g_tracer_bye(ims,kms,1,im), &
tracer_btxs(jms,kms,1,im), g_tracer_btxs(jms,kms,1,im), &
tracer_btxe(jms,kms,1,im), g_tracer_btxe(jms,kms,1,im), &
tracer_btys(ims,kms,1,im), g_tracer_btys(ims,kms,1,im), &
tracer_btye(ims,kms,1,im), g_tracer_btye(ims,kms,1,im), &
't', config_flags, &
config_flags%spec_bdy_width, grid%spec_zone, &
grid%dtbc, &
ids,ide, jds,jde, kds,kde, & ! domain dims
ims,ime, jms,jme, kms,kme, & ! memory dims
ips,ipe, jps,jpe, kps,kpe, & ! patch dims
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
ENDIF
END DO tracer_species_bdy_loop_3
scalar_species_bdy_loop_3 : DO is = PARAM_FIRST_SCALAR , num_3d_s
IF( ( config_flags%nested ) ) THEN
CALL g_spec_bdy_final ( scalar(ims,kms,jms,is), g_scalar(ims,kms,jms,is), &
grid%muts, grid%g_muts, grid%msfty, &
scalar_bxs(jms,kms,1,is), g_scalar_bxs(jms,kms,1,is), &
scalar_bxe(jms,kms,1,is), g_scalar_bxe(jms,kms,1,is), &
scalar_bys(ims,kms,1,is), g_scalar_bys(ims,kms,1,is), &
scalar_bye(ims,kms,1,is), g_scalar_bye(ims,kms,1,is), &
scalar_btxs(jms,kms,1,is), g_scalar_btxs(jms,kms,1,is), &
scalar_btxe(jms,kms,1,is), g_scalar_btxe(jms,kms,1,is), &
scalar_btys(ims,kms,1,is), g_scalar_btys(ims,kms,1,is), &
scalar_btye(ims,kms,1,is), g_scalar_btye(ims,kms,1,is), &
't', config_flags, &
config_flags%spec_bdy_width, grid%spec_zone, &
grid%dtbc, &
ids,ide, jds,jde, kds,kde, & ! domain dims
ims,ime, jms,jme, kms,kme, & ! memory dims
ips,ipe, jps,jpe, kps,kpe, & ! patch dims
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start , k_end )
ENDIF
END DO scalar_species_bdy_loop_3
END DO tile_bc_loop_3
!$OMP END PARALLEL DO
CALL wrf_debug ( 200 , ' end call g_spec_bdy_final' )
ENDIF
! dtbc will be read from basic state at every time step, so it need not to be updated here.
!
! IF( config_flags%specified .or. config_flags%nested ) THEN
! grid%dtbc = grid%dtbc + grid%dt
! ENDIF
! reset surface w for consistency
#ifdef DM_PARALLEL
# include "HALO_EM_C_TL.inc"
# include "PERIOD_BDY_EM_E.inc"
#endif
CALL wrf_debug ( 10 , ' call g_set_w_surface' )
fill_w_flag = .false.
!$OMP PARALLEL DO &
!$OMP PRIVATE ( ij )
DO ij = 1 , grid%num_tiles
CALL g_set_w_surface( config_flags, grid%znw, fill_w_flag, &
grid%w_2,grid%g_w_2, grid%ht, &
grid%u_2,grid%g_u_2, grid%v_2,grid%g_v_2, &
grid%cf1, grid%cf2, grid%cf3, grid%rdx, grid%rdy,&
grid%msftx, grid%msfty, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
grid%i_start(ij), grid%i_end(ij), &
grid%j_start(ij), grid%j_end(ij), &
k_start, k_end )
! its, ite, jts, jte, k_start, min(k_end,kde-1), &
END DO
!$OMP END PARALLEL DO
!-----------------------------------------------------------
! After all of the RK steps, after the microphysics, after p-rho-phi,
! after w, after filtering, we have data ready to use.
!-----------------------------------------------------------
CALL after_all_rk_steps ( grid, config_flags, &
moist, chem, tracer, scalar, &
th_phy, pi_phy, p_phy, rho_phy, &
p8w, t8w, dz8w, &
REAL(curr_secs,8), curr_secs2, &
diag_flag, &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
ips, ipe, jps, jpe, kps, kpe, &
imsx, imex, jmsx, jmex, kmsx, kmex, &
ipsx, ipex, jpsx, jpex, kpsx, kpex, &
imsy, imey, jmsy, jmey, kmsy, kmey, &
ipsy, ipey, jpsy, jpey, kpsy, kpey )
#ifdef DM_PARALLEL
!-----------------------------------------------------------------------
! see above
!--------------------------------------------------------------
CALL wrf_debug ( 200 , ' call HALO_RK_E' )
IF ( config_flags%h_mom_adv_order <= 4 ) THEN
# include "HALO_EM_E_3_TL.inc"
ELSE IF ( config_flags%h_mom_adv_order <= 6 ) THEN
# include "HALO_EM_E_5_TL.inc"
ELSE
WRITE(wrf_err_message,*)'solve_em_tl: invalid h_mom_adv_order = ',config_flags%h_mom_adv_order
CALL wrf_error_fatal(TRIM(wrf_err_message))
ENDIF
#endif
#ifdef DM_PARALLEL
IF ( num_moist >= PARAM_FIRST_SCALAR ) THEN
!-----------------------------------------------------------------------
! see above
!--------------------------------------------------------------
CALL wrf_debug ( 200 , ' call HALO_RK_MOIST' )
IF ( config_flags%h_mom_adv_order <= 4 ) THEN
# include "HALO_EM_MOIST_E_3_TL.inc"
ELSE IF ( config_flags%h_mom_adv_order <= 6 ) THEN
# include "HALO_EM_MOIST_E_5_TL.inc"
ELSE
WRITE(wrf_err_message,*)'solve_em_tl: invalid h_mom_adv_order = ',config_flags%h_mom_adv_order
CALL wrf_error_fatal(TRIM(wrf_err_message))
ENDIF
ENDIF
IF ( num_chem >= PARAM_FIRST_SCALAR ) THEN
!-----------------------------------------------------------------------
! see above
!--------------------------------------------------------------
CALL wrf_debug ( 200 , ' call HALO_RK_CHEM' )
IF ( config_flags%h_mom_adv_order <= 4 ) THEN
# include "HALO_EM_CHEM_E_3.inc"
ELSE IF ( config_flags%h_mom_adv_order <= 6 ) THEN
# include "HALO_EM_CHEM_E_5.inc"
ELSE
WRITE(wrf_err_message,*)'solve_em_tl: invalid h_mom_adv_order = ',config_flags%h_mom_adv_order
CALL wrf_error_fatal(TRIM(wrf_err_message))
ENDIF
ENDIF
IF ( num_tracer >= PARAM_FIRST_SCALAR ) THEN
!-----------------------------------------------------------------------
! see above
!--------------------------------------------------------------
CALL wrf_debug ( 200 , ' call HALO_RK_TRACER' )
IF ( config_flags%h_mom_adv_order <= 4 ) THEN
# include "HALO_EM_TRACER_E_3_TL.inc"
ELSE IF ( config_flags%h_mom_adv_order <= 6 ) THEN
# include "HALO_EM_TRACER_E_5_TL.inc"
ELSE
WRITE(wrf_err_message,*)'solve_em_tl: invalid h_mom_adv_order = ',config_flags%h_mom_adv_order
CALL wrf_error_fatal(TRIM(wrf_err_message))
ENDIF
ENDIF
IF ( num_scalar >= PARAM_FIRST_SCALAR ) THEN
!-----------------------------------------------------------------------
! see above
!--------------------------------------------------------------
CALL wrf_debug ( 200 , ' call HALO_RK_SCALAR' )
IF ( config_flags%h_mom_adv_order <= 4 ) THEN
# include "HALO_EM_SCALAR_E_3.inc"
ELSE IF ( config_flags%h_mom_adv_order <= 6 ) THEN
# include "HALO_EM_SCALAR_E_5.inc"
ELSE
WRITE(wrf_err_message,*)'solve_em_tl: invalid h_mom_adv_order = ',config_flags%h_mom_adv_order
CALL wrf_error_fatal(TRIM(wrf_err_message))
ENDIF
ENDIF
#endif
! Max values of CFL for adaptive time step scheme
DEALLOCATE(max_vert_cfl_tmp)
DEALLOCATE(max_horiz_cfl_tmp)
CALL wrf_debug ( 200 , ' call end of solve_em_tl' )
! Finish timers if compiled with -DBENCH.
#include "bench_solve_em_end.h"
RETURN
END SUBROUTINE solve_em_tl